Katalog-ENG Jadran

Registered
ISO 9001:2008
ISO: 14001:2004
OHSAS 18001:2007 127-A
SANDBLASTING AND
ANTI-CORROSION
PROTECTION ON
METAL SURFACES
FINISHING
WORKS IN
CONSTRUCTION
MAINTENANCE IN THE AREA OF
INFRASTRUCTURAL OBJECTS
FACADE
RENOVATION AND
REVITALISATION
Kornatska 2
Belgrade
+381 11 2781 333
www.jadran-bg.rs

OUR QUALITY - COMMON SATISFACTION
Today, Jadran d.o.o. is one of the recognized leader in market which firmly holds the leading position in the sectors of:
Sandblasting, anti-corrosion
and fire protection coatings
Finishing works
in construction
Renovation and revitalisation
on historical buildings facades
Maintenance in area
of infrastructural objects
The results achieved by the company over the past 60 years in cooperation with many companies at home and abroad
in the fields of civil engineering, oil industry, shipbuilding, mechanical industry, energy and so on, are the best recommendation
for obtaining new business partners.
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

LICENCES AND CERTIFICATES
ISO 9001:2008 ISO 14001:2004 SRPS ISO/IEC
27001/2014
The certificate is valid for the following
scope of operation: General
construction of buildings and
Building completion services
The certificate is valid for the following
scope of operation: General
construction of buildings and
Building completion services
General construction of buildings
and Building completion services,
corrosion protection, planning,
cutting and pruning tall vegetation
(trees), clearing and cutting
undergrowth and grass mowing,
all in accordance with the
Statement of Applicability dated
2015-05-05
SRPS ISO/IEC
50001/2012
General construction of buildings
and Building completion services,
corrosion protection, planning,
cutting and pruning tall vegetation
(trees), clearing and cutting
undergrowth and grass mowing
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

SANDBLASTING AND
ANTI-CORROSIVE PROTECTION
Surface preparation
Well prepared and cleansed surface is the basic condition for execution of anti-corrosive protection. Regardless of the fact that
the most convenient system of coating and that the protection has been performed in compliance with the prescribed manner of
application, the lifetime thereof will depend primarily on the quality executed preparation of the surface. Preparation of the surface
is performed applying various mechanical and chemical procedures. Wet or dry sand-blasting provides for optimum results in
terms of quality of cleansed area. Quartz sand or iron granules are used as the abrasive.
Sand-blasting is more expensive in comparison with other preparation procedures, however, there is a series of advantages thereof:
• it is performed more rapidly
• it provides for the base of uniform quality
• it provides for the applied coating system an average of three times longer life of exploitation in relation to the preparation made
by means of manual cleaning, etc.
JADRAN sand- blasting plant is equipped with mobile generating units and is fully capable of performing sand-blasting
activities on the site itself.
Protection with coating agents
Our works have been executed successfully and high manufacturing abilities have been proven in protection
of highly complex business and public facilities such as:
• all kinds of industrial plants, starting from the facilities where the process is performed in normal
environment to chemical, metallurgical and other plants continuously exposed to the impact of
aggressive environment
• complete hydro-power plants, hydro-systems and thermal power plants
equipment for transmission and distribution of electric power
• reservoir area for accommodation of liquid fluids: oil and oil derivatives, liquid
gases, acid, alkali and neutral solutions, alcoholic and non-alcoholic beverages,
water of various grades of purity and the likemetal silos, hangars and
other facilities for storing, etc.
• bridge structures
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

Thermal Power Plant
Tesla B - Ušće
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

SANDBLASTING AND
ANTI-CORROSIVE PROTECTION
Fire protection of cables and metal surfaces
Steel protection
At temperatures between 500°C and 600°C, the steel looses own static strength and is exposed to to plastic deformations.
The above means that, in addition to instant danger from fire, there is an indirect danger of possible loosening of steel structure
under the impact of high temperatures. All that may cause, in certain cases, demolition of roof parts of industrial halls
and other facilities.
By applying the quality fire prevention coatings, JADRAN d.o.o. successfully protects the steel structures from consequences
caused by fire. The mechanism of protective action of fire prevention coatings at direct impact of flame and
high temperatures is based on building of thermo-insulation foam of microporous structure. The increased heat of
the surrounding area causes swelling of the protective layer. In such way, the fire fighting coating of total thickness
of dry film amounting to 1.2-1.3 mm, becomes by swelling the protective thermal insulation layer up to
several centimeters thick.
Cable protection
With the aim of preventing the spreading of possible fire breaks, JADRAN d.o.o. performs fire prevention
alongside the entire length of horizontal and vertical cable routes, as follows:
• protection of cables and cable bundles using special fire coats which, in case of fire, slow
down the destruction of cable shield thus extending the time of cable functionality.
• protection of fire movable and fixed partitions and penetrations therein in the cable
tunnels and passages, by combination of special fire fighting and heat insulating
materials.
• time stability of the applied fire system corresponds to the cable lifetime.
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

FINISHING WORKS
IN CONSTRUCTION
DEMOLITION OF WALLS AND REMOVAL OF DEBRIS
Demolition of walls and removal of debris most often represent the first steps of renovation and adaptation of any living or
business premises.
Due to the specific nature of this job, the most important thing is to maximize the professional approach to the work and
ensure appropriate safety measures. These measures relate to safety at work and protection of other buildings or parts of
buildings that should not be demolished. It is also important to use the appropriate equipment or tools, and that the workers
are appropriately trained for this kind of work. After the demolition of walls, there is a large quantity of debris that needs to
be removed in order to continue the work.
PLASTER WORKS
Dry lining systems are more and more used in renovation and construction of residential and commercial
buildings. Unlike the old models of construction, these construction systems are very flexible and allow
a multiple use. We can freely say that there are no limits in use of gypsum, and through placement of
plaster slabs and execution of gypsum works one may create any interior one imagines. A big possibility
for combining forms and types of gypsum elements ensures that all wishes and ideas of an
employer or an architect may come true. Therefore, we can freely say that gypsum and gypsum
works make the interior become just what we imagined.
The gypsum works that can be performed within the interior renovation or construction
may include the following:
• Construction of suspended ceilings
• Construction of partition walls
• Construction of wall lining and placement of gypsum wallboards - dry plastering
• Construction of shelves and cascades from gypsum
• Jambs processing with use of plaster
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs
“Sirius Offices”
New Belgrade

“Green Square”
Belgrade
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

FINISHING WORKS
IN CONSTRUCTION
• Placement of stylish moldings and decorative elements.
PAINTING IN INTERIOR DESIGN
Surface preparation for painting, which includes wall smoothing, the most common and the most comprehensive action, followed
by the base coating, filling of some smaller holes, etc.
A surface painting represents the final action and it may be performed by use of a wide range of paints in terms of selection of
the paint and quality of the paint. The quality determines the type of paint to be used (semi-dispersive, dispersive, acrylic) and
the manufacturer. The main difference in quality is in color shades that we get - with semi-dispersive paint we cannot get bright
(strong) tones, while by use of acrylic paint, all color tones may be obtained. Also, the paints differ from the aspect of wearing
resistance, acrylic paint is more durable and washable (it can be cleaned by a wet cloth without any damage).
INSTALLATION AND CONSTRUCTION OF WATER SUPPLY AND SEWERAGE
Installation and construction of water supply system and sewerage in the house or apartment
is a very important element within the adaptation and renovation of space. In order to
have the water supply and take off system (i.e. the system of water and sewerage pipes)
properly established, it is necessary to know what are the sanitary wares to be used
in a certain space.
PARQUETRY WORKS
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

FINISHING WORKS
IN CONSTRUCTION
LAYING CERAMIC TILES
Laying ceramic tiles in a room has two basic purposes. The first relates to convenience of ceramic tiles in terms of easy maintenance,
water resistance, etc., and the other to aesthetic features.
Tiles may be laid in two manners. The first method is to set the tile into the adhesive, and the second is to lay tiles onto the
material. As for the quality and durability, both methods are equally good. The main differences are in the method of work,
type of tiles to be installed and preparation of the surface. Laying tiles onto the adhesive has a wider use and therefore is
recently more frequently used compared to laying tiles onto the material.
Parquetry works that need to be performed while placing or reconstructing parquet flooring are, inter alia, the following:
Setting - laying of parquet
Parquet sanding
Parquet polishing
Preparation of bedding
Parquet staining
Parquet varnishing
Removing of old paint finish.
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs
“Green Square”
Belgrade

JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

FACADES RENOVATION AND
REVITALISATION
It need not always be a new building. Often a new building shell is sufficient to adapt a structure to the current demands of air conditioning,
sound insulation, fire protection or appearance. This works even with on-going use - if you ask us.
So that you can depend on the quality of the implementation, we take part in construction meetings and ensure conformance to
standards and regulations in construction, building physics and statics.
On the building site we make sure that any defects are found and properly rectified. We plan and supervise the removal of the old
facade and check the quality of the new one, including the acceptance documentation.
Façade redesign must function to:
• Maintain and restore commercial buildings’ historic elements.
• Gracefully accommodate new uses for older structures.
• Recreate appealing façades for local businesses.
• Initiate construction and renovation projects with attention to a sense of architectural low and visual continuity in the business
district.
• Ensure that choice and design of materials relect these priorities.
Responsible façade renovation must:
• Clean, handle, and replace woodwork, stonework, and masonry in a respectful and restorative manner.
• Make sure all construction processes are safe and sustainable.
• Prioritize maintenance, building function, and code compliance projects before focusing on decorative
renovations; repair, then renovate.
• Preserve original features; renovate without excessively altering or concealing building.
Storefront Renovation Types
Recommended storefront renovation methods vary depending on the age of the building
and the current condition of the storefront. hese four storefront types each
have their own basic guidelines. he categories are:
• Original Historic Storefront (OHS)
• Altered Historic Storefront (AHS)
• Non-Historic Storefront (NHS)
• Building Without a Storefront (BWS)
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

FACADES RENOVATION AND
REVITALISATION
Original Historic Storefront (OHS) Guidelines
An OHS is part of a commercial building built before 1940 with its original storefront and distinctive features still intact or largely
intact. When renovating an OHS:
• Repair structural/functional parts of façade.
• Retain and restore historic details of building.
• Renovate to accommodate new use while maintaining original storefront.
Altered Historic Storefront (AHS) Guidelines
An AHS is part of a commercial building built before 1940 with its distinctive features dramatically altered or completely missing.
When renovating an AHS, three approaches apply:
• Partially or fully reconstruct the original storefront (if the original appearance of the storefront is documented).
• Construct a new storefront that is compatible with the design of the building.
• Retain the current storefront if it is a high-quality alteration of the original that has attained historical signiicance of its own.
Non-Historic Storefront (NHS) Guidelines
An NHS is part of a commercial building built after 1940. When renovating an NHS, two approaches apply:
• Repair the existing storefront to match its present appearance if it is compatible with the commercial district and
is of high-quality design and materials.
• Construct a new storefront according to the storefront design guidelines, remaining attentive to the historic
architectural patterns within the business district and striving to be consistent with neighboring
historic storefronts.
Building Without a Storefront (BWS) Guidelines
A BWS is a building not designed or originally intended for storefront commercial use (such as
a residence, a garage, etc.), it may be treated in either of two ways:
• If the building is historically important, if it has a distinct historical character, or if it is of
a high architectural quality, it should be renovated with as few changes to the exterior
as possible to accommodate the new use; a full storefront should not necessarily
be inserted into the façade.
• If the building does not have a distinct historical character or if it is of low
architectural quality, it may be altered more dramatically. If possible, a full
storefront should be inserted into the façade.
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

Our sculpture workshop
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

MAINTENANCE IN THE AREA OF
INFRASTRUCTURAL OBJECTS
We have an experienced, professional team of highly trained and fully certified operators who are familiar with the rules and regulations
for working in various commercial environments.
We are proud to work with local authorities on roadside vegetation clearance and maintenance projects, construction and facilities
management companies as well as public service and property management companies.
Our goal is to provide our clients with a cost effective, safety conscious and environmentally responsible service to meet their
vegetation management challenges.
MAINTENANCE OF INFRASTRUCTURE
Combining comprehensive vegetation services with highly trained staff and latest technology means that Salcey can also
provide solutions for a variety of infrastructure issues including vegetation removal from ditches and ditch re-profiling.
JADRAN can maintain and care for all highway verges for safety or aesthetic purposes whilst being sympathetic to
environmental factors. We work closely with our commercial partners and will agree a timed schedule with you that
will be reliable, non-disruptive and within your budget.
Our Highways team is highly trained and only uses the best and latest equipment so the desired outcome
is achieved in an efficient, timely and safe manner.
JADRAN offers comprehensive vegetation management solutions for rail corridors. Maintaining and
clearing vegetation on rail embankments in tight timescales, confined spaces and complex surroundings
demands high productivity and safety.
JADRAN have dedicated rail staff, who are certified PTS holders and undergo random drugs
and alcohol testing, to ensure vegetation solutions are delivered effectively, safely and
to exceptionally high safety standards. We also operate the latest equipment and
have our own ecology experts to ensure that work is carried out with minimum disruption
to the rail service and in harmony with the environment.
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

MAINTENANCE IN THE AREA OF
INFRASTRUCTURAL OBJECTS
SITE CLEARANCE
Prior to the main contractor starting work, JADRAN will deliver the land to you in pristine and build-ready condition within your
budget and timescales. We will liaise with you at every step and ensure that you receive site-specific method statements and
risk assessments plus highlight any ecological and environmental issues, such as the protection of endangered species, control
of wildlife and preservation of rare plants.
With so much experience in this area, JADRAN operates a vast range of plant and equipment that will cope effectively with
almost any clearance task. Therefore, work can be carried out efficiently and effectively. From experienced Chainsaw
Operators and Arborists through to innovative mulching units and stump grinding machines, our teams can comprehensively
clear your site no matter what the requirements.
Our wealth of experience, combined with skilled operatives and latest equipment, ensures that
all operations are conducted professionally and safely in the interest of your staff and the
public.
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

REFERENCES
FINISHING
WORKS IN
CONSTRUCTION
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

“Green Square”
Belgrade
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

REFERENCES
FINISHING
WORKS IN
CONSTRUCTION
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

“Sirius Offices”
Belgrade
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

REFERENCES
FINISHING
WORKS IN
CONSTRUCTION
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

Interior in
building of
public
information
service
RTS
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

REFERENCES
FINISHING
WORKS IN
CONSTRUCTION
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

Interior in
former
headquarter
building of
Serbian
Army
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

FACADES
RENOVATION AND
REVITALISATION
before
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

Admirala
Geprata 15
Belgrade
after
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

FACADES
RENOVATION AND
REVITALISATION
before
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

Prote
Mateje 25
Belgrade
after
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

SANDBLASTING AND
ANTI-CORROSIVE
PROTECTION
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

Thermal
Power Plant
Nikola Tesla
Obrenovac
JADRAN d.o.o. // A: Kornatska 2, Belgrade / P: +381 11 2781 333 / www.jadran-bg.rs

Jadran d.o.o.
Address:
Kornatska 2
11000 Belgrade
Phone:
+381 11 2781 333
Email:
office@jadran-bg.rs