PTA00375EN
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
inserting the system separation<br />
sleeve<br />
System separation silicone<br />
Novindustra AG 4450 Sissach +41 (0)61 976 70 70<br />
Gewerbestrasse 1 Schweiz info@novindustra.com www.novindustra.com
1 Inserting the system separation sleeve<br />
Inserting the system separation sleeve<br />
1. Forming the cuff and laying it out on a flat<br />
surface<br />
2. Slide Clamp-nozzle or flange over system<br />
separation<br />
3. Place the Clamp nozzle or flange against<br />
the silicone collar from below, so that the<br />
collar rests on the Ring groove.<br />
PTA00372EN 2 / 3 Version 01 / November 2017
Inserting the system separation sleeve<br />
Einpressen des Silikonkragens in die Nut<br />
1. Slightly turn off the collar (1)<br />
2. Press collar into the groove (2)<br />
3. Simultaneously press with thumb<br />
against working direction (4) while<br />
pressing in with thumbs.<br />
MOV_1356.mp4<br />
PTA00372EN 3 / 3 Version 01 / November 2017