How to Fix Canon Printer Error Code B200 Call 1-800-213-8289

How to Fix Canon Printer Error 

Code B200 

Toll-Free1-800-213-8289

Canon is the leading and famous manufacturing company, which 

delivered a wide range of printers, to home and business users. 

However, Canon Printers are known worldwide for their easy 

troubleshooting. But, according to the recent research conduct by 

our Canon technical support professionals, numerous of users are 

encountered the error while working. The Error Code B200 is one 

of the most common errors, which encountered by users in the 

Canon Printers. Well, this kind of error code could happen due to 

various reasons, includes Print head issue or when not normal the 

print head voltage or temperature or Print head could be 

defective, Cartridges issue, Power connection issue, logic board, 

and so on. So, if you are getting exactly the same Canon Printer 

Error Code B200, while you are working. Then you don’t need to 

worry about it. Therefore, here the blog will guide you some easy 

methods on Fix Canon Printer Error Code B200. Then you 

require following the below steps to solve the problem quickly. 


Method 1:- Turn OFF the Printer Power For Some Time 

• First, you should try to check to turn off or disconnect the 

power cable of the printer to the back from your 

Computer to automatically remove the error code B200. 

• Follow these steps to do this task:- 

• Turn the printer off. 

• Unplug the power from the printer for at least 8-10 

minutes. 

• While unplugged, remove any paper from the unit. 

• Then double check for any obstructions found in the unit 

or paper paths. 

• If no obstructions are found, plug the power back in and 

turn the unit on. 

Call 1-800-213-8289

Method 2:- Verify Internet Connection and Administrator 

Access on A Computer 

• You will need to verify that you have an internet 

connection and administrator access on a computer. 

• Update the printer drivers as well as the Canon IJ Printer 

Utility software. 

• Click on the “Start” from your Windows desktop and click 

“Devices and Printers.” 

• Right-click the Canon and click “Properties.” 

• Select the “Maintenance” tab and click “Deep Cleaning.” 

• Run a Nozzle Check from the “Maintenance” tab when 

the deep cleaning is done. 

• If everything is ok, but still this error persists, then you 

should proceed to the next step. 


Method 3:- Check Your Canon Cartridges 

• You should try to check your cartridges connectors and functioning because 

an empty cartridge can lead to Canon Printer Error Code B200. 

• Step 1:- Check Cartridges Connectors 

• Verify all the cartridge connectors (copper contacts on the front of the 

cartridge) and printer connectors, which located also in the front of the 

head. They must be clean in its entirety parts, means may be they not have 

stains of ink or down that can prevent the proper operation. 

• Step 2:- Check your Cartridges Slot 

• You need to ensure that all the cartridges are in the correct slot. Follow the 

colored indication to insert the cartridges in the appropriate way. 

• Step 3:- Check your Cartridges Compatibility 

• Now you have confirmed that your cartridges are compatible with your 

Canon printer. Verify check your cartridges compatibility. 

• Go through with the user manual or confirm from the dealer about the same. 

• Also, you must don’t leave the printer without the ink cartridges for too much 

time as ink may dry on the print head causing printing issues. 


Step 4-Replace the Cartridge 

• Step 4-Replace the Cartridge 

• After performing the entire above step, if you find the cartridge has a fault. 

Then you need to do to replace the cartridge. 

• Method 4:- Clean the Print Head 

• You should need to clean the Print Head Deeply, as cleaning the print head 

deeply consumes more ink than the standard cleaning of the print head, so 

clean the print head deeply only when necessary. 

• Step 1:- Turn On the Printer Power 

• Make sure that the power is turned on 

• Step 2:- Cleaning the Print Head 

• Hold down the “Stop” button until the “Alarm” lamp flashes orange three 

times, then release it immediately. Then the printer starts cleaning the print 

head deeply. 

• The cleaning will be complete when the ON lamp lights green after flashing. 


Step 4-Replace the Cartridge 

• Make sure that you don’t need to perform any other operations until the 

printer completes the deep cleaning of the print head. 

• The process will take not much time, as it takes about 1 to 2 minutes.. 

• tep 3:- Check the Print Head Condition 

• Then you will need to check the print head condition. Then print the nozzle 

check pattern. 

• Then reinstall the parts you removed and close the compartment door. 

• Next, reconnect the power cord and other cables and restart the printer. 

• Then print a test page to verify that the printer is working properly 

• If the problem is not resolved, then you should try to turn off the power and 

clean the print head deeply again after 24 hours. 


• Call us anytime at Canon Customer Support Phone 

Number, which is a toll-free and available 24×7 days to 

fix your problems by our technicians immediately. We 

are renowned and versatile Canon customer support 

service providers, available here to your help and deliver 

you the comprehensive guide to fix the Canon printer 

issues rapidly. It assures you will grab the swift, calm 

and hasty solutions to fix the Canon Printer technical 

issues of or errors. Hence, call on this toll-free number to 

get further help for Canon Printer queries. 


Canon Printer Customer Support Phone 

Number Is Available 24×7 To Your Help

GET IN TOUCH WITH US 

Canon Printer Support Number 

https://www.facebook.com/canonprintertechnicalsupportphonenumbe 

r/ 

https://plus.google.com/u/0/b/116030026982756504246/116 

030026982756504246/posts 

https://twitter.com/ForCanonprinter

How to Fix Canon Printer Error Code B200 Call 1-800-213-8289

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?