Smorgasboarder_11_May-2012
V-FLEX BAMBI HO CLASSIC STANDARD MAL OLD FAITHFUL Shaper: Peter White Length: 9’3” + Thickness: 3" Width: 22 ¾ Ideal: Ideally point breaks but guaranteed to put a cheesy grin on your face on mellow beachies. Suits: Hipsters and Soul- Kats, Freaks and Fiends. Ability: Int - Adv. Description: Features mid-60s elements, a softer pinched rail, single fin (box or glassed) rolled bottom gentle vee through the tail. The vee-designed stringer that runs ¾ of the way up produces added stiffness in the tail to allow a solid pivot and lift in the tip. Applying weight forward allows the nose to “V-Flex” creating a flatter nose rocker and a greater trim. Construction: PU foam, 3mm vee stringer, 7.5oz and a 7.5oz on deck with a 7.5oz deck patch + 7.5oz bottom. Fins: Fixed/box 10” hatchet Comment: V-Flex is the Sex Shaper: Terry “Snake” Bishop Dimensions: 9’6 x 22 ½" x 3 1 / 8" Ideal conditions: Bellambi Pools (I think that says it all) Suits: 1-2 foot fat righthanders Ability Level: Any Description: This is a conventional longboard, nice and wide in the nose, flattened rocker and double concave vee bottom in the tail. Easy to ride, with good flow. Construction: PU foam, 6 + 4oz deck and 4 + 4 oz on the bottom. Fins: 8’-10’ fin, with a set of GL’s in the sides Shaper: Terry “Snake” Bishop Dimensions: 9’0" x 22 ½" x 3" Ideal conditions: Up to shoulder high point break Suits: Everyone Description: This is a traditional mal, based on the boards coming out of California in the 60s. Pointed nose flat rocker 50/50 rail with a roller bottom and heavy. Just really good for cruising Construction: PU foam, Volan top and bottom. Glassed in fin. 2" Balsa with ¼" Ceder Stringer Fins: Glassed in dolphin fin Shaper: Bronte Bampton Specs: 9’1” x 22 ½” x 2 3 /8”- 3” Suits: 1-6 ft average to quality surf Description: Standard mal for all level surfers. Single concave with slight doubles through fins. Medium entry with average tail lift med/low rails. Construction: PU blank, FGI resins, Aerolite cloth. Stock: 6 x 6 x 6 Fins: Fin box plus stabilisers – can be ordered in quad. Shaper comment: This is our most popular mal which suits absolutely everyone whether you are a beginner or experienced. Shaper: Thomas Bexon Specs: 9’6” x 23” x 3” Ideal conditions: Knee to head-high, any type of wave where you’d want to ride a log. Suits: Someone after an all round traditional log, glide, trim, nose ride, pivot turn. Ability Level: Intermediate to advanced Description: Tried and tested many times over, this one is my personal favourites for a go-to log if I could only ever have one. Construction: ¼” cedar stringer, double 8oz deck, 8oz, abstract resin tint work as neat as it gets. Fins: Glassed on fin Shaper comment: call me CLASSIC MALIBU Cnr Gibson & Eumundi Rd Noosaville, QLD 4566 Ph: 07 5474 3122 info@classicmalibu.com www.classicmalibu.com CARABINE SURFBOARDS 36 Finders Street Wollongong, NSW Ph/Fax: 02 4229 9462 carabinesurfboards.com.au CARABINE SURFBOARDS 36 Finders Street Wollongong, NSW Ph/Fax: 02 4229 9462 carabinesurfboards.com.au LIQUID STIX SURFBOARDS Moana, South Australia Ph: 0407 606 685 E: liquidstix@bigpond.com www.liquidstix.com.au Available @ MCS & Preece’s THOMAS SURFBOARDS Shop 175 Noosa Eumundi Road, Noosaville PO Box 239 Noosa Heads Qld 4567 Ph: 0412 131 491 thomas_bexon@hotmail.com thomassurfboards.com 128 may/jun 2012
Leave the rest in your wake... GEAR: BOARDS SHAPER’S PROMOTION PERFORMER ALL-ROUNDER THE LIMB THE MACKEREL THE SURFSKATE The best of both worlds - a recycled EPS foam core and 2-3mm balsawood skin. With a weight of only 7-8 kg and an emphasis on manoeuvrability and maximum speed, the Performer is designed and shaped for today’s high performance longboarding. The Performer comes with a single box fin and two smaller stabiliser fins. Custom orders are welcome. SPECIFICATIONS Length: 9’0’’ - 9’4’’ Width: 22 ¼’’ - 23’ Thickness: 2 ½’’ - 3’’’ Weight: 7 - 8kg Suits: intermediate Ideal waves: 1-8ft Construction: foam core modern longboard Stringer: Triple, 30mm apart Bottom: Vee Tail: Rounded square Rails: nose - 70/30 centre - 80/20 tail - 90/10 The Allrounder is an EPS foam-core performance Mini-Mal. It is the only board that features our newly designed 1 / 8’’ cedar rail stringers for added stiffness on smaller waves. This type of board is suited to most riders – perfect for small to medium sized conditions and great for all ages. SPECIFICATIONS Length: 7’0’’ - 8’6’’ Width: 20 ½’’ - 23’’ Thickness: 2 ½’’ - 3’’ Suits: Beginner to experienced Ideal waves: 1 ft to 6 ft Weight: 3.5 kg Construction: EPS foam core Stringer: Riley cedar rail stringers and centre stringer Bottom: Vee Tail: Square Rails: Hard 80/20 A balsa skinned EPS foam core shortboard, the recycled EPS foam and the absence of a stringer create a significant reduction in weight, with great memory and flex. A great board for beach breaks from 2 - 8ft waves, the Riley Limb has a set thrusters fins, but boxes are optional at no extra cost. The Riley balsa coloured fin system allows for changing fin setups and lets you choose between fin size, rake, angles, material, and more. SPECIFICATIONS Length: 5’10’’ - 6’8’’ Width: 18 1/2’’- 20’’ Thickness: 2 1/2’’ - 3’’ Weight: 3 kg Suits: Advanced to experienced Ideal waves: 2 ft to 8 ft Construction: Recycled EPS foam core Stringer: none Bottom shape: Vee scoop in the tail to concave centre and concave nose Tail: Rounded square Rails: 80/20 Logo: Computer cut cedar balsa giving it the natural look and feel. Fins: Stick on 4 ½” wood combo thruster This is the modern version of the retro fish. It has a little less volume with a rolled deck giving it better and tighter turns. This has a quad fin box set up that can be used as a twin also. The cedar stringers separate the stained balsa strips to represent the Striped Mackerel. SPECIFICATIONS Length: 5’10’’ - 6’4’’ Width: 20’’ - 22’’ Thickness: 2 ½” - 3’’ Weight: 4.6 kg Suits: Advanced to experienced Ideal waves: ½ - 5ft Construction: EPS foam core Stringer: Cedar parallel stringers Bottom shape: Vee from nose to centre and flat at the tail Tail shape: swallow Rails: Vee at front and centre, flat at tail The surfskate translates to new style wake surfing by using a thinner, smaller board for more tricks, flips, pops and airs. This board can be used in small hollow waves or behind a large wake boat. SPECIFICATIONS Length: 4’10” Width: 20” Thickness: ¾” centre and 7 / 8” nose and tail Nose and tail shape: Pin Fin: Single wood – reverse fish dorsal in box Construction: The solid balsa construction gives it good strength, flex and buoyancy. Suited to the experienced and agile waker or surfer. RILEY BALSAWOOD SURFBOARDS Ph: 0412 376 464 E: mark@riley.com.au www.balsasurfboardsriley.com.au may/jun 2012 129
- Page 78 and 79: TRAVEL SURF TRIP “I could’ve go
- Page 80 and 81: 80 may/jun 2012
- Page 82 and 83: X GENUINELY NOT FROM CHINA GASfins
- Page 84 and 85: As we made our way to the Founders
- Page 86 and 87: TRAVEL SURF TRIP HEADING SOUTH: KAI
- Page 88 and 89: TRAVEL SURF TRIP We started making
- Page 90 and 91: 90 may/jun 2012
- Page 92 and 93: PHOTOS: BEN VOS 92 may/jun 2012
- Page 94 and 95: 94 may/jun 2012 facebook.com/buellw
- Page 96 and 97: TOP: Sadhana Surfboards are perfect
- Page 98 and 99: Stay, surf, shop and dine at the Bi
- Page 100 and 101: Late in the afternoon after our sur
- Page 102 and 103: 102 may/jun 2012
- Page 104 and 105: PHOTO: BEN VOS Did you know? Dunedi
- Page 106 and 107: RIGHT: Walk to the front please sir
- Page 108 and 109: PHOTO: BEN VOS DUNEDIN LOCALS: GRAH
- Page 110 and 111: TRAVEL SURF TRIP We have to come ba
- Page 112 and 113: THERE’S SO MUCH MORE SKATE, SUP,
- Page 114 and 115: THERE’S SO MUCH MORE Kaiteriteri
- Page 116 and 117: Paddleboarding around Christchurch
- Page 118 and 119: So much yet to do and experience...
- Page 120 and 121: 120 may/jun 2012
- Page 122 and 123: 122 may/jun 2012
- Page 124 and 125: THE SHAPER’S APPRENTICE THE WINNE
- Page 126 and 127: The high five Check out the choices
- Page 130 and 131: JUNIOR SERIES FIRE-FLY TWINZER MINI
- Page 132 and 133: UNIQUE BOARDS BY THE CLASSIC WATERM
- Page 134 and 135: Working flexitime NOT A FISH PERFOR
- Page 136 and 137: TEST WETSUITS “LET’S SEE WHAT T
- Page 138 and 139: TEST WETSUITS “LET’S SEE WHAT T
- Page 140 and 141: TEST WETSUITS “LET’S SEE WHAT T
- Page 142 and 143: Seventhwave I must admit I have fal
- Page 144 and 145: For those on a tight budget, H2Odys
- Page 146 and 147: may/jun 2012 TEST WETSUITS “LET
- Page 148 and 149: TEST EVERYTHING “DON’T KNOCK IT
- Page 150 and 151: SHAPING MICHAEL PETERSON R.I.P. 195
- Page 152 and 153: Nose & Paddle Guards, Rail Tape & L
- Page 154 and 155: SURF DIRECTORY Pick up the next edi
- Page 156 and 157: SURF TRIP ACCOMMODATION Planning QU
- Page 158 and 159: Brought to you by SURF TRIP ACCOMMO
- Page 160 and 161: TOP PARTING SHOTS A different kind
- Page 162 and 163: 162 may/jun 2012 GET READY FOR MORE
- Page 164: It’s what we can’t tell you tha
Leave the<br />
rest in your<br />
wake...<br />
GEAR: BOARDS<br />
SHAPER’S PROMOTION<br />
PERFORMER<br />
ALL-ROUNDER<br />
THE LIMB<br />
THE MACKEREL<br />
THE SURFSKATE<br />
The best of both<br />
worlds - a recycled EPS<br />
foam core and 2-3mm<br />
balsawood skin. With<br />
a weight of only 7-8<br />
kg and an emphasis on<br />
manoeuvrability and<br />
maximum speed, the<br />
Performer is designed<br />
and shaped for today’s<br />
high performance<br />
longboarding. The<br />
Performer comes with<br />
a single box fin and<br />
two smaller stabiliser<br />
fins. Custom orders are<br />
welcome.<br />
SPECIFICATIONS<br />
Length: 9’0’’ - 9’4’’<br />
Width: 22 ¼’’ - 23’<br />
Thickness: 2 ½’’ - 3’’’<br />
Weight: 7 - 8kg<br />
Suits: intermediate<br />
Ideal waves: 1-8ft<br />
Construction: foam core<br />
modern longboard<br />
Stringer:<br />
Triple, 30mm apart<br />
Bottom: Vee<br />
Tail: Rounded square<br />
Rails:<br />
nose - 70/30<br />
centre - 80/20<br />
tail - 90/10<br />
The Allrounder is an EPS<br />
foam-core performance<br />
Mini-Mal. It is the only<br />
board that features our<br />
newly designed 1 / 8’’ cedar<br />
rail stringers for added<br />
stiffness on smaller<br />
waves. This type of board<br />
is suited to most riders<br />
– perfect for small to<br />
medium sized conditions<br />
and great for all ages.<br />
SPECIFICATIONS<br />
Length: 7’0’’ - 8’6’’<br />
Width: 20 ½’’ - 23’’<br />
Thickness: 2 ½’’ - 3’’<br />
Suits: Beginner to<br />
experienced<br />
Ideal waves: 1 ft to 6 ft<br />
Weight: 3.5 kg<br />
Construction: EPS foam<br />
core<br />
Stringer: Riley cedar<br />
rail stringers and centre<br />
stringer<br />
Bottom: Vee<br />
Tail: Square<br />
Rails: Hard 80/20<br />
A balsa skinned EPS<br />
foam core shortboard, the<br />
recycled EPS foam and<br />
the absence of a stringer<br />
create a significant<br />
reduction in weight,<br />
with great memory and<br />
flex. A great board for<br />
beach breaks from 2 - 8ft<br />
waves, the Riley Limb<br />
has a set thrusters fins,<br />
but boxes are optional at<br />
no extra cost. The Riley<br />
balsa coloured fin system<br />
allows for changing<br />
fin setups and lets you<br />
choose between fin size,<br />
rake, angles, material,<br />
and more.<br />
SPECIFICATIONS<br />
Length: 5’10’’ - 6’8’’<br />
Width: 18 1/2’’- 20’’<br />
Thickness: 2 1/2’’ - 3’’<br />
Weight: 3 kg<br />
Suits: Advanced to<br />
experienced<br />
Ideal waves: 2 ft to 8 ft<br />
Construction: Recycled<br />
EPS foam core<br />
Stringer: none<br />
Bottom shape: Vee<br />
scoop in the tail to<br />
concave centre and<br />
concave nose<br />
Tail: Rounded square<br />
Rails: 80/20<br />
Logo: Computer cut<br />
cedar balsa giving it the<br />
natural look and feel.<br />
Fins: Stick on 4 ½” wood<br />
combo thruster<br />
This is the modern<br />
version of the retro fish.<br />
It has a little less volume<br />
with a rolled deck giving<br />
it better and tighter turns.<br />
This has a quad fin box<br />
set up that can be used<br />
as a twin also. The cedar<br />
stringers separate the<br />
stained balsa strips to<br />
represent the Striped<br />
Mackerel.<br />
SPECIFICATIONS<br />
Length: 5’10’’ - 6’4’’<br />
Width: 20’’ - 22’’<br />
Thickness: 2 ½” - 3’’<br />
Weight: 4.6 kg<br />
Suits: Advanced to<br />
experienced<br />
Ideal waves: ½ - 5ft<br />
Construction: EPS foam<br />
core<br />
Stringer: Cedar parallel<br />
stringers<br />
Bottom shape: Vee from<br />
nose to centre and flat<br />
at the tail<br />
Tail shape: swallow<br />
Rails: Vee at front and<br />
centre, flat at tail<br />
The surfskate translates<br />
to new style wake surfing<br />
by using a thinner, smaller<br />
board for more tricks, flips,<br />
pops and airs.<br />
This board can be used<br />
in small hollow waves or<br />
behind a large wake boat.<br />
SPECIFICATIONS<br />
Length: 4’10”<br />
Width: 20”<br />
Thickness: ¾” centre<br />
and 7 / 8” nose and tail<br />
Nose and tail shape: Pin<br />
Fin: Single wood –<br />
reverse fish dorsal in box<br />
Construction:<br />
The solid balsa<br />
construction gives it<br />
good strength, flex and<br />
buoyancy.<br />
Suited to the experienced<br />
and agile waker or surfer.<br />
RILEY BALSAWOOD SURFBOARDS<br />
Ph: 0412 376 464 E: mark@riley.com.au www.balsasurfboardsriley.com.au<br />
may/jun <strong>2012</strong><br />
129