Component Dimensions and Weights - Passion-Liebherr.

Technical Description R 974 B
Hydraulic Excavator
Machine for Industrial Applications
Operating Weight 130 t
Engine Output 360 kW (490 HP)
litronic` High Rise

Technical Data
Engine
Rating per ISO 9249 ________ 360 kW (490 HP) at 1800 RPM
Model ____________________________ Liebherr D 9408 TI-E
Type ______________________________ 8 cylinder V-engine
Bore/Stroke ________________ 135/160 mm
Displacement ____________ 17,2 l
Engine operation ______________ 4-stroke diesel
direct injection
turbo-charged
after-cooled
reduced emissions
Cooling __________________________ water-cooled
Air cleaner ______________________ dry-type air cleaner with pre-cleaner,
primary and safety elements, automatic
dust discharge
Fuel tank ________________________ 1280 l
Electrical system
Voltage ______________________ 24 V
Batteries ____________________ 2 x 144 Ah/12 V
Starter ______________________ 24 V/9,0 kW
Alternator __________________ three phase current 28 V/80 A
Hydraulic System
Hydraulic pumps
for attachment and
travel drive ________________ 2 Liebherr variable flow swash plate pumps
Max. flow __________________ 2 x 496 l/min.
Max. hydr. pressure ____ 350 bar with high-lift circuit kit
Pump control __________________ electro-hydraulic with electronic engine
speed sensing regulation over entire RPM
range, pressure compensation, flow compensation
automatic oil flow optimizer, flow
summation
Hydraulic pump
for swing drive ____________ 1 reversible swash plate pump, closed-loop
circuit
Max. flow __________________ 295 l/min.
Max. hydr. pressure ____ 230 bar
Hydraulic tank __________________ 700 l
Hydraulic system ______________ 1200 l
Hydraulic oil filter ______________ 2 full flow filters in return line with integrated
fine filter area (5 µm), 1 high pressure
filter for each main pump
Cooler ____________________________ compact cooler, consisting of a water
cooler, sandwiched with hydraulic oil cooler
and aftercooler cores and hydrostatically
driven fan
MODE selection ______________ adjustment of machine performance and
the hydraulics via a mode selector to
match application
LIFT __________________________ for lifting
FINE ________________________ for precision work and lifting through very
sensitive movements
ECO __________________________ for especially economical and environmentally
friendly operation
POWER ____________________ for maximum digging power and heavy
duty jobs
R.P.M. adjustment ____________ stepless adjustment of engine output via
the r.p.m. at each selected mode
Hydraulic Controls
Power distribution ____________ via control valves in single block with integrated
safety valves
Flow summation ________ to boom and stick cylinders
Closed-loop circuit ____ for uppercarriage swing drive
Servo-control circuit ________ separate, electro-hydraulic proportional
control for individual working movements
Servo circuit
Attachment and
swing ________________________ – proportional via joystick levers
Travel ________________________ – proportional via foot pedals or removable
hand levers
Additional functions __________ proportional via foot pedals
2 TD R 974 B Litronic High Rise Machine for Industrial Applications
Swing Drive
Drive by __________________________ Liebherr swash plate motor with integrated
brake valves
Transmission ____________________ Liebherr compact planetary reduction gear
Swing ring ______________________ Liebherr, sealed single race ball bearing
swing ring, internal teeth
Swing speed ____________________ 0 – 3,6 RPM stepless
Swing torque __________________ 260 kNm
Holding brake __________________ wet multi-disc (spring applied, pressure
released)
Option ____________________________ pedal controlled positioning brake
Uppercarriage
Design ____________________________ torque resistant modular design upper
frame
Attachment mounting ______ parallel length girders
Catwalks ________________________ wide lateral catwalks at the rear of the
uppercarriage
Operator’s Cab
Cab ________________________________ built from deep drawn components, resiliently
mounted, sound insulated, tinted
windows, front window stores overhead,
door with sliding window
Operator’s seat ________________ shock absorbing suspension, adjustable to
operator’s weight, 6-way adjustable seat
with mountable head rest
Joysticks ________________________ integrated into adjustable seat consoles
Monitoring ______________________ menu driven query of current operating
conditions via the LCD display. Automatic
monitoring, display, warning (acoustical
and optical signal) and saving machine
malfunction data, for example, engine overheating,
low engine oil pressure or low
hydraulic oil level
Heating system ________________ standard air conditioning, combined
cooler/heater, additional dust filter in fresh
air/recirculated
Noise emission
ISO 6396 ________________________ L pA (inside cab) = 78 dB(A)
2000/14/EC ____________________ L wA (surround noise) = 110 dB(A)
Undercarriage
Version High Rise
HR ____________________________ heavy duty, large and long base
Drive ______________________________ Liebherr swash plate motors
Transmission ____________________ Liebherr planetary reduction gears
Travel speed ____________________ 0 – 2,8 km/h
Drawbar pull max. ____________ 715 kN
Track components ____________ B 9 S, maintenance-free
Track rollers/
Carrier rollers __________________ 9/2
Track pads ______________________ flat pads
Digging locks __________________ wet multi-discs (spring applied, pressure
released)
Brake valves ____________________ integrated in main valve block
Attachment
Type ________________________________ box-type, combination of resistant steel
plates and cast steel components
Hydraulic cylinders __________ Liebherr cylinders with special seal-system,
shock absorbed
Pivots ____________________________ sealed,low maintenance
Pivots bucket-to-stick,
bucket-to-link __________________ O-ring sealed and completely enclosed
Lubrication ______________________ easily accessible centralized lubrication
Hydraulic connections ______ pipes and hoses equipped with SAE splitflange
connections

Dimensions
W
mm
A 3630
A1 5810
D 5080
E 5200
H 6140
K 4130
L 7200
P 1518
Q 650
L
U
Z
E
D
X G
K
H
N
mm
R1 2510
S 5500
U 8410
N 750
B 6250
G 6670
Z 9300
W 6400
X 19000
R1
TD R 974 B Litronic High Rise Machine for Industrial Applications 3
Q
A
S
B
A1
P

Industrial Attachment
with Industrial-Type Gooseneck Boom 14,00 m
ft m
26
80
24
70
22
20
60 18
-30
40
30
20
10
0
-10
16
14
12
10
8
6
4
2
0
-2
-4
-20 -6
-30
-8
-10
1
2
3
-40 -12
4
-14
26 24 22 20 18 16 14 12 10 8 6 4 2 0 m
80
70
60
4 TD R 974 B Litronic High Rise Machine for Industrial Applications
50
40
30
20
10
0 ft
Attachment Envelope
Industrial-type gooseneck boom pinned in upper hole of boom foot
bearing
1 with industrial stick 9,00 m (grapple suspension pivot)
2 with industrial stick 10,50 m
3 with grapple model 25 on industrial stick 9,00 m
for HR-undercarriage
4 with grapple model 25 on industrial stick 10,50 m
for HR-undercarriage
Operating Weight
and Ground Pressure
Operating weight includes basic machine with industrial gooseneck
boom 14,00 m, industrial stick 10,50 m and grapple model 25.
Undercarriage HR
Pad width mm 750
Weight kg 130000
Ground pressure kg/cm 2 1,14

Lift Capacities
at End of Stick
Industrial Stick 9,00 m
Height Under- Radius of load from centerline of machine (m)
(m) carriage 6,0 7,5 9,0 10,5 12,0 13,5 15,0 16,5 18,0 19,5 21,0 22,5 24,0
24,0 HR
22,5 HR
21,0 HR
19,5 HR
18,0 HR
16,5 HR
15,0 HR
13,5 HR
12,0 HR
10,5 HR
9,0 HR
7,5 HR
6,0 HR
4,5 HR
3,0 HR
1,5 HR
0 HR
– 1,5 HR
– 3,0 HR
– 4,5 HR
– 6,0 HR
– 7,5 HR
– 9,0 HR
10,4# (10,4#)
10,3# (10,3#) 10,0# (10,0#)
10,1# (10,1#) 9,8# ( 9,8#)
10,1# (10,1#) 9,7# ( 9,7#) 9,4# ( 9,4#)
10,2# (10,2#) 9,7# ( 9,7#) 9,4# ( 9,4#) 9,1# ( 9,1#)
10,4# (10,4#) 9,9# ( 9,9#) 9,4# ( 9,4#) 9,1# ( 9,1#)
11,4# (11,4#) 10,7# (10,7#) 10,1# (10,1#) 9,5# ( 9,5#) 9,1# ( 9,1#) 8,9# (8,9#)
13,0# (13,0#) 11,9# (11,9#) 11,0# (11,0#) 10,3# (10,3#) 9,7# ( 9,7#) 9,3# ( 9,3#) 8,9# (8,9#)
17,8# (17,8#) 15,4# (15,4#) 13,7# (13,7#) 12,4# (12,4#) 11,4# (11,4#) 10,6# (10,6#) 10,0# (10,0#) 9,4# ( 9,4#) 9,0# (9,0#)
21,3# (21,3#) 23,7# (23,7#) 19,4# (19,4#) 16,6# (16,6#) 14,6# (14,6#) 13,1# (13,1#) 11,9# (11,9#) 11,0# (11,0#) 10,2# (10,2#) 9,6# ( 9,6#) 9,1# (9,1#)
20,7# (20,7#) 21,1# (21,1#) 17,7# (17,7#) 15,4# (15,4#) 13,7# (13,7#) 12,3# (12,3#) 11,3# (11,3#) 10,5# (10,5#) 9,8# ( 9,8#) 9,2# (9,2#) 8,7# (8,7#)
10,1# (10,1#) 22,6# (22,6#) 18,8# (18,8#) 16,2# (16,2#) 14,3# (14,3#) 12,8# (12,8#) 11,7# (11,7#) 10,7# (10,7#) 10,0# (10,0#) 9,3# (9,3#) 8,8# (8,8#)
7,8# ( 7,8#) 18,5# (18,5#) 19,7# (19,7#) 16,9# (16,9#) 14,8# (14,8#) 13,2# (13,2#) 12,0# (12,0#) 11,0# (11,0#) 10,1# (10,1#) 9,4# (9,4#) 8,8# (8,8#)
2,9# ( 2,9#) 7,8# ( 7,8#) 15,4# (15,4#) 20,4# (20,4#) 17,5# (17,5#) 15,3# (15,3#) 13,6# (13,6#) 12,2# (12,2#) 11,2# (11,2#) 10,3# (10,3#) 9,5# (9,5#)
4,8# ( 4,8#) 8,6# ( 8,6#) 14,8# (14,8#) 20,8# (20,8#) 17,8# (17,8#) 15,6# (15,6#) 13,8# (13,8#) 12,4# (12,4#) 11,3# (11,3#) 10,4# (10,4#) 9,5# (9,5#)
6,6# ( 6,6#) 9,9# ( 9,9#) 15,2# (15,2#) 21,0# (21,0#) 18,0# (18,0#) 15,8# (15,8#) 14,0# (14,0#) 12,6# (12,6#) 11,4# (11,4#) 10,4# (10,4#) 9,4# (9,4#)
8,5# ( 8,5#) 11,4# (11,4#) 16,1# (16,1#) 20,8# (20,8#) 18,0# (18,0#) 15,8# (15,8#) 14,0# (14,0#) 12,5# (12,5#) 11,3# (11,3#) 10,2# (10,2#) 9,2# (9,2#)
10,2# (10,2#) 13,0# (13,0#) 17,4# (17,4#) 20,4# (20,4#) 17,7# (17,7#) 15,6# (15,6#) 13,8# (13,8#) 12,4# (12,4#) 11,1# (11,1#) 9,9# ( 9,9#)
14,6# (14,6#) 18,9# (18,9#) 19,7# (19,7#) 17,2# (17,2#) 15,1# (15,1#) 13,4# (13,4#) 12,0# (12,0#) 10,7# (10,7#) 9,4# ( 9,4#)
20,7# (20,7#) 18,6# (18,6#) 16,3# (16,3#) 14,4# (14,4#) 12,8# (12,8#) 11,3# (11,3#) 9,9# ( 9,9#)
15,1# (15,1#) 13,3# (13,3#) 11,8# (11,8#)
Industrial Stick 10,50 m
Height Under- Radius of load from centerline of machine (m)
(m) carriage 6,0 7,5 9,0 10,5 12,0 13,5 15,0 16,5 18,0 19,5 21,0 22,5 24,0
24,0 HR
9,7# ( 9,7#)
22,5 HR
9,2# ( 9,2#)
21,0 HR
8,9# ( 8,9#) 8,7# ( 8,7#)
19,5 HR
8,8# ( 8,8#) 8,5# ( 8,5#) 8,0# (8,0#)
18,0 HR
8,8# ( 8,8#) 8,5# ( 8,5#) 8,2# (8,2#)
16,5 HR
8,8# ( 8,8#) 8,5# ( 8,5#) 8,2# (8,2#) 8,0# (8,0#)
15,0 HR
9,0# ( 9,0#) 8,6# ( 8,6#) 8,2# (8,2#) 8,0# (8,0#)
13,5 HR
9,7# ( 9,7#) 9,2# ( 9,2#) 8,7# ( 8,7#) 8,3# (8,3#) 8,0# (8,0#) 7,8# (7,8#)
12,0 HR
10,8# (10,8#) 10,1# (10,1#) 9,4# ( 9,4#) 8,9# ( 8,9#) 8,5# (8,5#) 8,1# (8,1#) 7,8# (7,8#)
10,5 HR
12,4# (12,4#) 11,3# (11,3#) 10,5# (10,5#) 9,7# ( 9,7#) 9,2# ( 9,2#) 8,7# (8,7#) 8,3# (8,3#) 7,9# (7,9#)
9,0 HR
17,3# (17,3#) 14,9# (14,9#) 13,2# (13,2#) 11,9# (11,9#) 10,9# (10,9#) 10,1# (10,1#) 9,4# ( 9,4#) 8,9# (8,9#) 8,4# (8,4#) 8,0# (8,0#)
7,5 HR 24,4# (24,4#) 23,2# (23,2#) 18,9# (18,9#) 16,1# (16,1#) 14,1# (14,1#) 12,6# (12,6#) 11,4# (11,4#) 10,5# (10,5#) 9,7# ( 9,7#) 9,1# (9,1#) 8,6# (8,6#) 8,1# (8,1#) 7,2# (7,2#)
6,0 HR
7,0# ( 7,0#) 23,4# (23,4#) 20,5# (20,5#) 17,2# (17,2#) 14,9# (14,9#) 13,2# (13,2#) 11,9# (11,9#) 10,8# (10,8#) 10,0# (10,0#) 9,3# (9,3#) 8,7# (8,7#) 8,2# (8,2#) 7,6# (7,6#)
4,5 HR
4,8# ( 4,8#) 12,7# (12,7#) 21,9# (21,9#) 18,3# (18,3#) 15,7# (15,7#) 13,8# (13,8#) 12,3# (12,3#) 11,2# (11,2#) 10,3# (10,3#) 9,5# (9,5#) 8,9# (8,9#) 8,3# (8,3#) 7,7# (7,7#)
3,0 HR
4,9# ( 4,9#) 10,2# (10,2#) 20,5# (20,5#) 19,1# (19,1#) 16,4# (16,4#) 14,3# (14,3#) 12,7# (12,7#) 11,5# (11,5#) 10,5# (10,5#) 9,7# (9,7#) 9,0# (9,0#) 8,4# (8,4#)
1,5 HR
5,7# ( 5,7#) 9,9# ( 9,9#) 17,1# (17,1#) 19,8# (19,8#) 16,9# (16,9#) 14,7# (14,7#) 13,1# (13,1#) 11,8# (11,8#) 10,7# (10,7#) 9,8# (9,8#) 9,1# (9,1#) 8,4# (8,4#)
0 HR
6,8# ( 6,8#) 10,3# (10,3#) 16,1# (16,1#) 20,2# (20,2#) 17,2# (17,2#) 15,0# (15,0#) 13,3# (13,3#) 12,0# (12,0#) 10,9# (10,9#) 9,9# (9,9#) 9,1# (9,1#) 8,4# (8,4#)
– 1,5 HR
8,1# ( 8,1#) 11,2# (11,2#) 16,2# (16,2#) 20,3# (20,3#) 17,4# (17,4#) 15,2# (15,2#) 13,5# (13,5#) 12,1# (12,1#) 10,9# (10,9#) 9,9# (9,9#) 9,1# (9,1#) 8,2# (8,2#)
– 3,0 HR
9,4# ( 9,4#) 12,2# (12,2#) 16,7# (16,7#) 20,2# (20,2#) 17,4# (17,4#) 15,2# (15,2#) 13,5# (13,5#) 12,1# (12,1#) 10,9# (10,9#) 9,8# (9,8#) 8,9# (8,9#)
– 4,5 HR 10,6# (10,6#) 13,4# (13,4#) 17,7# (17,7#) 19,8# (19,8#) 17,1# (17,1#) 15,0# (15,0#) 13,3# (13,3#) 11,9# (11,9#) 10,7# (10,7#) 9,6# (9,6#) 8,5# (8,5#)
– 6,0 HR
14,6# (14,6#) 18,9# (18,9#) 19,1# (19,1#) 16,6# (16,6#) 14,6# (14,6#) 12,9# (12,9#) 11,5# (11,5#) 10,3# (10,3#) 9,1# (9,1#)
– 7,5 HR
20,4# (20,4#) 15,8# (15,8#) 13,9# (13,9#) 12,3# (12,3#) 10,9# (10,9#) 9,6# ( 9,6#) 8,2# (8,2#)
– 9,0 HR
14,5# (14,5#) 12,8# (12,8#) 11,3# (11,3#)
The lift capacities are stated in metric tonnes (t) on the lifting gear’s stick tip, and can be lifted 360° on firm, level supporting surface. Values quoted
in brackets are valid for the undercarriage when in longitudinal position. Capacities are valid for 750 mm wide triple grouser pads. Indicated loads
are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hydraulic capacity (indicated via #). Lifting capacity of the excavator
is limited by machine stability and hydraulic capacity.
When lifting loads, the hydraulic excavator must be equipped with automatic check valve on its hoist cylinders and overload warning device
according to European Standard, EN 474-5.
TD R 974 B Litronic High Rise Machine for Industrial Applications 5

Component Dimensions and Weights
6 TD R 974 B Litronic High Rise Machine for Industrial Applications
L
L
L
L
L
L
L
L
H
H
H H1
H
H
H
H
H
Cab
L Length mm 1750
H Height mm 1900
Width mm 1000
Weight kg 420
Counterweight
L Length mm 970
H Height mm 1550
Width mm 3800
Weight kg 18000
Undercarriage Central Girder
L Length mm 4200
H Height mm 3655
H1 Height mm 4070
Width mm 4800
Weight kg 19000
Side Frame
L Length mm 8410
H Height mm 1520
Width mm 1100
Weight kg 2 x 18000
Catwalk and Railing Front Right
L Length mm 2620
H Height mm 1160
Width mm 800
Weight kg 320
Catwalk and Railing Front Left
L Length mm 3270
H Height mm 1660
Width mm 1100
Weight kg 440
Catwalk and Railing Rear Right
L Length mm 2100
H Height mm 1580
Width mm 800
Weight kg 245
Catwalk and Railing Rear Left
L Length mm 2420
H Height mm 1580
Width mm 800
Weight kg 295

Component Dimensions and Weights
H
L
L
L
L
L
L
L
L
H
H
H
H
H
H
Catwalk and Railing Front
L Length mm 1540
H Height mm 1300
Width mm 1500
Weight kg 2 x 240
Catwalk and Railing Rear
L Length mm 2580
H Height mm 1310
Width mm 1250
Weight kg 380
Ladder
L Length mm 1570
H Height mm 3600
Width mm 710
Weight kg 102
Uppercarriage
L Length mm 5600
H Height mm 2050
Width mm 400
Weight kg 21550
Cab Elevation
L Length mm 9450
H Height mm 2750
Width mm 1000
Weight kg 7650
Hoist Cylinders (two)
L Length mm 2915
Ø Diameter mm 350
Weight kg 2 x 950
Industrial Gooseneck Boom
Length m 14,00
L Length mm 14350
H Height mm 1850
Width mm 1500
Weight kg 13670
Industrial Gooseneck Stick
Length m 9,00 10,50
L Length mm 9350 10850
H Height mm 1450 1450
Width mm 1420 1420
Weight kg 4620 5200
TD R 974 B Litronic High Rise Machine for Industrial Applications 7

Variety of Tools
8 TD R 974 B Litronic High Rise Machine for Industrial Applications
Shells for Loose Material Clamshell Model 25
Shells for loose material with
cutting edge (without teeth)
Cutting width mm 1700 1700
Capacity m3 2,30 2,80
For loose material, specific weight up to t/m3 1,5 1,2
Weight kg 3200 3250
Multiple Tine Grapples open tines semi-closed tines closed tines
Grapple model 75 Capacity m3 2,00 2,50 2,00 2,50 2,00 2,50
(5 tines) Weight kg 2800 2900 3380 3500 3500 3650
Crane Hook with Suspension
Max. load t 12,5
Height with suspension mm 1250
Weight kg 265
Electro-Magnets with Suspension
Generator up to 33 kW
For further information see “Attachment-Information – Liebherr Hydraulic Clamshells and Grapples”. To operate a magnet, the installation of a
generator is required; please contact your dealer or the factory for further information.

Equipment
Undercarriage S O
Three track guide per track •
Integrated travel drive •
Digging locks •
Different undercarriage versions •
Different track pad width •
Uppercarriage S O
Engine hood with lift help •
Lockable tool box •
Handrails, non slip surfaces •
Tool kit •
Maintenance-free swing brake lock •
Maintenance-free HD-batteries •
Sound insulation •
Mechanical swing lock upper/lower •
Electric fuel tank filler pump •
Pedal controlled positioning swing brake •
Customized paint – compl. machine •
Protection for front working light •
Heavy counterweight •
Hydraulics S O
Electronic pump regulation •
Stepless work mode selector
Pressure storage for controlled lowering of attachments with
•
engine turned off •
Hydraulic tank shut-off valve •
Pressure compensation •
Flow compensation •
Filter with integrated fine filter area (5 µm) •
Pressure test ports •
Additional hydraulic circuits •
Bio degradable hydraulic oils •
High lift circuit •
Filter for secondary circuit •
Main switch for electric circuit •
Engine S O
Direct injection •
Turbo charger •
Air filter with pre-cleaner, main and safety element •
Air filter with automatic dust ejector •
Automatic idling •
Cold start aid •
Fuel pre-heater •
S = Standard, O = Option
Operator’s Cab S O
Deep drawn cab shell components •
All tinted windows •
Door with sliding window •
All-round adjustable roof flap •
Rain protective shade for front window •
Washer and wiper •
6-way adjustable cloth suspension seat •
Seat and consoles independently adjustable •
Coat hook •
Dome light •
Sun visor •
Inside rear mirrors •
Radio installation prep-kit •
Removable handle for travel pedals •
Cigar lighter and ashtray •
Removable custom floor mat •
Storage and literature tray •
Digital instrumentation •
Digital instruments for oil temp.engine RPM and oil pressure •
Digital hour meter visible from outside •
Heating-air conditioning system •
Removable lower section of front window with support •
AM/FM stereo radio w/cassette •
Air power seat adjustment with heating •
Warning beacon •
Additional flood lights •
Fan •
Armored glass •
Attachment S O
Cylinders with shock absorbers •
Sealed pivots •
Centralized lube points •
SAE split flanges on all high pressure lines •
Work light on boom •
Liebherr line of clams and grapples •
Safety check valves for hoist cylinder •
Overload warning device •
Quick disconnect hose couplers •
Customized colors •
Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the
knowledge and approval of Liebherr to retain warranty.
TD R 974 B Litronic High Rise Machine for Industrial Applications 9

Liebherr-France SAS
2, Avenue Joseph Rey, B.P. 287, F-68005 Colmar Cedex
� +33 (0)389 21 35 10, Fax +33 (0)389 21 37 93
www.liebherr.com, E-Mail: info@lfr.liebherr.com
Printed in Germany by Typodruck Gagstatter RG-BK-RP LFR/SP 10026652-2-05.03 Illustrations and data may differ from standard equipment. Subject to change without notice. All indicated loads are based in accordance with ISO 9248.