D - Timken
D - Timken D - Timken
D A • Ball BeaRIngs TIMKEN SURvIvOR PT SERIES Timken’s SURVIVOR Series housed units have been created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with federal food processing requirements without compromising bearing performance needs. The patented SURVIVOR PT polymer housed units have been tested to withstand a wide range of highly corrosive chemicals commonly found in food and beverage processing industries. These units are dimensionally stable under load and can operate in continuous temperatures up to 250° F (brief exposure up to 350° F) and the finish will not scrape or flake off during use. The bearing inserts, given the proprietary Timken thin dense chrome coating, are combined with stainless steel locking collars to provide superior corrosion protection. This coating is a thin, dense chrome coating that will not crack or peel under known application conditions. The bearing housings are available as high-base and low-base pillow blocks, and 2-bolt and 4-bolt flanged cartridges for popular shaft sizes of 3 /4 in. through 1 1 /2 in. and 20 mm through 40 mm diameters. Bearing inserts are available with the self-locking collar or the setscrew locking device. The SURVIVOR PT assemblies are dimensionally interchangeable with the current line of Timken cast iron housed units. The SURVIVOR Series provides extraordinary corrosion resistance for food and beverage industries, materials handling operations, dairy and refrigeration applications, as well as HVAC, chemical, maritime and other highly corrosive environments. All materials used in the SURVIVOR assemblies, including the grease, are approved for USDA and FDA compliant industries. ORDERING INFORMATION To order complete SURVIVOR polymer assemblies, simply add the “PT” suffix to the current cast iron housed unit designations. Example: YCJT 1 PT or RAK 3 /4 PT Refer to the corresponding cast iron housing design for dimensional data. Consult your Timken sales representative or an authorized distributor for shaft size availability. SURVIVOR inserts can be ordered using Timken’s standard part number for wide inner ring bearings with a “TDCF” suffix. Example: D80 TIMKEN PRODUCTS CATALOG GY1100KRRB TDCF or G1100KRRB + COL TDCF PT SERIES COMPONENT MATERIAL BaIls Stainless Steel Ball Retainer Nylon Collar Stainless Steel Crush Bushing Stainless Steel Grease FDA Approved Housing Polymer Grease Fitting Stainless Steel Grease Fitting Cover Nylon Rings TDC plated Seals Synthetic Rubber Seal Caps Stainless Steel Setscrew Stainless Steel
TIMKEN SURvIvOR NT SERIES Timken SURVIVOR NT Series is designed to stand up to the demands of the food handling industries and for use in highly corrosive applications. The NT Series provides outstanding protection in combination with thin dense chrome coating ball bearing inserts, collar and the electroless nickel-plated housing. The SURVIVOR NT Series units are available as high-base and low-base pillow blocks, and 2-bolt and 4-bolt flanged cartridges for popular shaft sizes of 1 /2 in. through 2 15 /16 in. (and selected metric diameters). Timken also produces a take-up unit in the SURVIVOR NT Series in limited shaft sizes (RTU-NT). The bearing inserts are available with self-locking collars. The SURVIVOR NT Series is dimensionally interchangeable with the current line of Timken cast iron housed units. The SURVIVOR NT Series provides extraordinary corrosion resistance in a durable package suitable for food and beverage industries, materials handling operations, dairy and refrigeration applications, as well as HVAC, chemical, maritime and other highly corrosive environments. All materials used in the SURVIVOR assemblies, including the grease, are approved for USDA and FDA compliant industries. ORDERING INFORMATION To order complete SURVIVOR nickel-plated assemblies, simply add the “NT” suffix to the cast iron housed unit designations. Example: RCJT 1 NT or RAK 3/4 NT Refer to the corresponding cast iron housing design for dimensional data. Consult your Timken sales representative or an authorized distributor for shaft size availability. SURVIVOR inserts can be ordered using Timken’s standard part number for wide inner ring bearings with a “TDCF” suffix. Example: NT SERIES G1100KRRB + COL TDCF COMPONENT MATERIAL BaIls Stainless Steel Ball Retainer Nylon Collar Stainless Steel Rings TDC plated Grease FDA Approved Housing Finish Nickel Plating Grease Fitting Stainless Steel Grease Fitting Cover Nylon Seals Synthetic Rubber Seal Caps Stainless Steel Setscrew (1) Stainless Steel (1) Standard Survivor NT units are only available in the “r” series, self- locking collar types. Setscrew lock series (“Y”) units are available for minimum quantity orders. Housed Units TIMKEN PRODUCTS CATALOG D81 • AD A
- Page 31 and 32: TRI-PLY SEAL SERIES RELUBRICATABLE
- Page 33 and 34: hEX BORE BEARINGS • Designed to b
- Page 35 and 36: FARM RADIAL SPECIALS (continued) BE
- Page 37 and 38: SPECIAL BEARINGS 200KRR3 J202KRR8 2
- Page 39 and 40: BIh SERIES - MAXIMUM CAPACITY TYPE
- Page 41 and 42: 7000WN PRODUCT FAMILY INTRODUCTION
- Page 43 and 44: MEDIUM 7 00WN SERIES • Dimensiona
- Page 45 and 46: LIGhT 00 SERIES • Features the sa
- Page 47 and 48: ShIELD AND SNAP RING COMBINATIONS 0
- Page 49 and 50: WIDE INNER RING Wide Inner Ring Ove
- Page 51 and 52: Wide Inner Ring Ball Bearings Page
- Page 53 and 54: RA-DD SERIES BEARINGS The RA-DD Ser
- Page 55 and 56: KR, KRR, KRRB INDUSTRIAL SERIES NON
- Page 57 and 58: GN-KRRB HEAVy SERIES RELUBRICATABLE
- Page 59 and 60: GRA-RR, GRA-RRB STANDARD SERIES REL
- Page 61 and 62: GyA-RR, GyA-RRB STANDARD SERIES REL
- Page 63 and 64: KL, KLB, KLL, KLLB SPECIAL SERIES N
- Page 65 and 66: KLLG SPECIAL SERIES WITH WIRELOC
- Page 67 and 68: Tri-Ply Seal Industrial Series B 1
- Page 69 and 70: Gy-KRRB SETSCREW INDUSTRIAL SERIES
- Page 71 and 72: ER INDUSTRIAL SERIES RELUBRICATABLE
- Page 73 and 74: SMN HEAVy SERIES A AND B TyPES/MUOA
- Page 75 and 76: SMN-S HEAVy SERIES • Construction
- Page 77 and 78: HOUSED UNITS Housed Units Overview:
- Page 79 and 80: Wide Inner Ring Ball Bearings House
- Page 81: TIMKEN SELF-LOCKING COLLAR INSTALLA
- Page 85 and 86: YAK INDUSTRIAL SERIES SETSCREW UNIT
- Page 87 and 88: RAS, TAS, LAS INDUSTRIAL SERIES •
- Page 89 and 90: YAS INDUSTRIAL SERIES SETSCREW UNIT
- Page 91 and 92: SAS STANDARD SERIES • The SAS is
- Page 93 and 94: RAKHL EXPANSION SERIES • Designed
- Page 95 and 96: STB SERIES • STB two-bolt housed
- Page 97 and 98: RAO, LAO HEAvY SERIES • Compact,
- Page 99 and 100: RSAO, LSAO HEAvY SERIES • RSAO pi
- Page 101 and 102: SAOL HEAvY SERIES FIXED & FLOATING
- Page 103 and 104: RCJ, TCJ, LCJ INDUSTRIAL SERIES •
- Page 105 and 106: YCJ INDUSTRIAL SETSCREW SERIES •
- Page 107 and 108: SCJ STANDARD SERIES • Flange cart
- Page 109 and 110: YCJM MEDIUM DUTY SERIES SETSCREW LO
- Page 111 and 112: RCJT, TCJT, LCJT INDUSTRIAL SERIES
- Page 113 and 114: vCJT STANDARD SERIES • Same desig
- Page 115 and 116: SCJT STANDARD SERIES • Same const
- Page 117 and 118: RFC INDUSTRIAL PILOTED SERIES CONCE
- Page 119 and 120: 30° 30° H1 GRFD, GRFDR RELUBRICAT
- Page 121 and 122: GRFTD, GRFTDR Relubricatable Series
- Page 123 and 124: PBS SERIES • Economical transmiss
- Page 125 and 126: vFMST SERIES • Zinc-plated, press
- Page 127 and 128: RA FLANGETTE UNIT • Similar to Ti
- Page 129 and 130: RATR, RRTR TRIANGLE FLANGETTE UNITS
- Page 131 and 132: RCSM, RCR, CR SERIES • RCSM and R
TIMKEN SURvIvOR NT SERIES<br />
<strong>Timken</strong> SURVIVOR NT Series is designed to stand up to the demands of the food handling<br />
industries and for use in highly corrosive applications. The NT Series provides outstanding<br />
protection in combination with thin dense chrome coating ball bearing inserts, collar and the<br />
electroless nickel-plated housing.<br />
The SURVIVOR NT Series units are available as high-base and low-base pillow blocks,<br />
and 2-bolt and 4-bolt flanged cartridges for popular shaft sizes of 1 /2 in. through 2 15 /16 in. (and<br />
selected metric diameters). <strong>Timken</strong> also produces a take-up unit in the SURVIVOR NT Series<br />
in limited shaft sizes (RTU-NT). The bearing inserts are available with self-locking collars.<br />
The SURVIVOR NT Series is dimensionally interchangeable with the current line of <strong>Timken</strong><br />
cast iron housed units.<br />
The SURVIVOR NT Series provides extraordinary corrosion resistance in a durable<br />
package suitable for food and beverage industries, materials handling operations, dairy and<br />
refrigeration applications, as well as HVAC, chemical, maritime and other highly corrosive<br />
environments.<br />
All materials used in the SURVIVOR assemblies, including the grease, are approved for<br />
USDA and FDA compliant industries.<br />
ORDERING INFORMATION<br />
To order complete SURVIVOR nickel-plated assemblies, simply add the<br />
“NT” suffix to the cast iron housed unit designations. Example:<br />
RCJT 1 NT or RAK 3/4 NT<br />
Refer to the corresponding cast iron housing design for dimensional data. Consult your<br />
<strong>Timken</strong> sales representative or an authorized distributor for shaft size availability.<br />
SURVIVOR inserts can be ordered using <strong>Timken</strong>’s standard part number for wide inner ring<br />
bearings with a “TDCF” suffix. Example:<br />
NT SERIES<br />
G1100KRRB + COL TDCF<br />
COMPONENT MATERIAL<br />
BaIls Stainless Steel<br />
Ball Retainer Nylon<br />
Collar Stainless Steel<br />
Rings TDC plated<br />
Grease FDA Approved<br />
Housing Finish Nickel Plating<br />
Grease Fitting Stainless Steel<br />
Grease Fitting Cover Nylon<br />
Seals Synthetic Rubber<br />
Seal Caps Stainless Steel<br />
Setscrew (1) Stainless Steel<br />
(1) Standard Survivor NT units are only available in the “r” series, self-<br />
locking collar types. Setscrew lock series (“Y”) units are available for<br />
minimum quantity orders.<br />
Housed Units<br />
TIMKEN PRODUCTS CATALOG D81<br />
•<br />
AD<br />
A