D - Timken

LIGhT, WIDE TYPE W 00PP SERIES W 00KLL SERIES
• Rubber seal (W200PP) and Mechani-Seal (W200KLL) types.
• Made with standard bores, standard outside diameters and
a single row of balls.
• Same widths as double-row bearings of corresponding size.
• Extra width offers a larger support area for shaft and housing
contact and added space for prepacked lubricant.
• Wide-type rubber seal bearings are particularly suited for use d
in electric motors, where they simplify housing design by
eliminating auxiliary seals.
• Wide-type Mechani-Seal ball bearings are designed for
applications where frictionless sealing and large grease
capacity are required.
• Extremely effective grease retention and exclusion of foreign
matter are assured by close running clearance between the
seal members and slinger action of the outer member.
DIMENSIONS – TOLERANCES
Radial and Angular Contact Ball Bearings
Bearing Bore Outside Width Fillet Wt. Static Extended Snap Ring PPG ( )
Number d Diameter C Radius (1) Load Dynamic
D Rating Load
Contact Mechanitolerance
+0.000 mm
tolerance
+0.000 mm
+0.00 mm
-0.1 mm
Co CE
( )
Seal seal +0.0000" +0.0000" +0.000"
PP LL to minus to minus -.005" O.D. thickness offset
mm in. mm in. mm in. mm in. mm in. mm in. kg lbs. N lbs. N lbs. mm in. mm in. mm in.
W200PP — 10 0.3937 0.008 0.0003 30 1.1811 0.009 0.00035 14.27 0.562 0.6 0.024 0.045 0.10 2650 600 6550 1500 — — — — — —
W201PP — 12 0.4724 0.008 0.0003 32 1.2598 0.011 0.00045 15.88 0.625 0.6 0.024 0.054 0.12 3000 695 7500 1700 — — — — — —
W202PP — 15 0.5906 0.008 0.0003 35 1.3780 0.011 0.00045 15.88 0.625 0.6 0.024 0.064 0.14 3450 780 8650 1930 — — — — — —
W203PP (2) — 17 0.6693 0.008 0.0003 40 1.5748 0.011 0.00045 17.48 0.688 0.6 0.024 0.091 0.20 4400 1000 10600 2360 44.4 1 3/4 1.07 0.042 4.7 0.185
W204PP W204KLL 20 0.7874 0.010 0.0004 47 1.8504 0.011 0.00045 20.62 0.812 1.0 0.039 0.150 0.33 6200 1400 14300 3200 — — — — — —
W205PP (2) W205KLL 25 0.9843 0.010 0.0004 52 2.0472 0.013 0.0005 20.62 0.812 1.0 0.039 0.177 0.39 6950 1560 15600 3450 57.5 2 17/64 1.07 0.042 5.72 0.225
W206PP (2) W206KLL 30 1.1811 0.010 0.0004 62 2.4409 0.013 0.0005 23.83 0.938 1.0 0.039 0.295 0.65 10000 2280 21600 4800 67.5 2 21/32 1.65 0.065 6.15 0.242
W207PP W207KLL 35 1.3780 0.012 0.00045 72 2.8346 0.013 0.0005 26.97 1.062 1.0 0.039 0.458 1.01 13700 3050 28500 6400 — — — — — —
W208PP W208KLL 40 1.5748 0.012 0.00045 80 3.1496 0.013 0.0005 30.18 1.188 1.0 0.039 0.630 1.39 17600 4000 36000 8150 — — — — — —
W209PP W209KLL 45 1.7717 0.012 0.00045 85 3.3465 0.015 0.0006 30.18 1.188 1.0 0.039 0.668 1.47 17600 4000 36000 8150 — — — — — —
W210PP — 50 1.9685 0.012 0.00045 90 3.5433 0.015 0.0006 30.18 1.188 1.0 0.039 0.767 1.69 19600 4500 39000 8800 — — — — — —
W214PP — 70 2.7559 0.015 0.0006 125 4.9213 0.018 0.0007 39.67 1.562 1.5 0.059 1.810 3.99 37500 8500 69500 15600 — — — — — —
(1) Maximum shaft or housing fillet radius that bearing corners will clear.
(2) Also available with snap ring. To order, add suffix “G” to bearing number. Example: W205PPG.
(3) The snap ring is normally packaged separately in the box with the bearing.
(4) Based on 10 6 revolutions of calculated fatigue life.
C
D
Rubber Seals Mechani-Seals
PP LL
d
OFFSET
O.D.
C
TIMKEN PRODUCTS CATALOG D 1
D
THICKNESS
•
AD
A
A
A
A
A