SL16352 Malco AutoBody Tools Catalog 2015
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
QUARTER PANEL TURBOXTOOLS<br />
QUARTER PANEL HEMMING<br />
DRILL ATTACHMENT<br />
Bend and close wheel arc flanges of replacement<br />
quarter panels with powered precision.<br />
Replicates a hammer and dolly motion<br />
at high speed, with precision, less<br />
fatigue and faster results.<br />
• Quickly hem quarter panels on late model<br />
cars with a range of wheel arc flange widths<br />
up to 3/4 inch (19.05 mm).<br />
• Anvil and hammer head may be cleaned<br />
of any adhesive residue from hemming<br />
operation using a common solvent.<br />
• Long wearing anvil and hammer<br />
are easily replaced on the job.<br />
QHT1<br />
U.S. Patent No. 7,093,365<br />
Drill Not Included.<br />
360˚<br />
Bull nose face orientation: Tighten lower set screw<br />
to secure head. Use rounded bull nose face to roll<br />
over flange.<br />
Flat face orientation: Tighten striking angle<br />
before tightening head. Use flat face to close<br />
and seal seam.<br />
Hem replacement quarter panels on<br />
late model cars up to 80% faster!<br />
Save time and get better looking results when replacing rear quarter panels on late<br />
model vehicles. Expect to finish in five to eight minutes, up to 80% faster than using<br />
a hammer and dolly. While you work, you stand outside the vehicle with a clear view<br />
of what you are doing. Risks of scratching, denting,<br />
or marring the car during hemming are eliminated.<br />
This means no need for rework, another time saver.<br />
Any adhesive residue is easily removed from the tool.<br />
DOOR SKIN REMOVAL & HEMMING DRILL ATTACHMENT TURBOSHEARS<br />
TOOL CAPACITY WEIGHT REPLACEMENT PARTS<br />
DSR1 Door Skin Removal 20 gauge (0.91 mm) 2.2 lbs (1.00 kg) DSR1RB (Blades)<br />
Drill Attachment Turboshear<br />
DHT1 Door Skin Hemming 20 gauge (0.91 mm) 2.8 lbs (1.27 kg) DHTRA (Anvil)<br />
Drill Attachment Turboshear<br />
QHT1 Quarter Panel Hemming 28-22 gauge (0.38-0.76 mm) 2.3 lbs (1.04 kg) QHT1RA (Anvil)<br />
Drill Attachment Turboshear<br />
QHT1RH (Hammer)<br />
TSCGC TurboShear Chuck Guard .06 lbs (0.03 kg)<br />
TSDCC TurboShear Drill Clamp .73 lbs (0.33 kg)<br />
6
Change language