SL16352 Malco AutoBody Tools Catalog 2015
DOOR SKIN AIR POWERED TURBOXTOOLS DHT1A DOOR SKIN HEMMING AIR TOOL Hem edges of replacement door skins with speed, precision and limited manual tacking. • Easily operated with one hand. • High impact ABS polymer anvil guides head, while pressed against outer edge and finished side of door, skin without marring or scratching. • Hemming tool head is resistant to solvents and easily cleaned of any panel adhesive. Hems door skins with speed and precision! 2600 RPM 2600 TR/Min 4 CFM, 133 L/Min 90 PSI, 6.2 Bar Slightly angling lip of replacement door skin with a hammer and dolly and flattening point of entry ensures a smooth operation. Anvil guides head without marring or scratching finished side of door. FOR FACTORY-LIKE FINISH! 11
QUARTER PANEL AIR POWERED TURBOXTOOLS QUARTER PANEL HEMMING AIR TOOL Use air power to bend and close wheel arc flanges of replacement quarter panels with speed, precision and limited manual tacking. QHT1A • One-hand operation. • Quickly hem quarter panels on late model cars with a range of wheel arc flange widths up to 3/4 inch (19.05 mm). • Anvil and hammer head may be cleaned of any adhesive residue from hemming operation using a common solvent. • Long wearing Anvil and Hammer are easily replaced on the job. 2600 RPM 2600 TR/Min 4 CFM, 133 L/Min 90 PSI, 6.2 Bar BEST NEW COLLISION REPAIR & REFINISH PRODUCT 2014 AWARD WINNER Bull nose face orientation: Tighten lower set screw to secure head. Use rounded bull nose face to roll over flange. Flat face orientation: Tighten striking angle before tightening head. Use flat face to close and seal seam. Hem replacement quarter panels on late model cars up to 80% faster! DOOR SKIN HEMMING AIR TOOL TURBOSHEARS TOOL CAPACITY WEIGHT REPLACEMENT PARTS DHT1A Door Skin Hemming 20 gauge (0.91 mm) 4.0 lbs (1.81 kg) DHTRA (Anvil) Air Tool Turboshear QHT1A Quarter Panel Hemming 28-22 gauge (0.38-0.76 mm) 3.5 lbs (1.59 kg) QHT1RA (Anvil) Air Tool Turboshear QHT1RH (Hammer) 12
- Page 1 and 2: PROFESSIONAL COLLISION REPAIR & AUT
- Page 3 and 4: METAL-CUTTING TURBOSHEARS 20 GAUGE
- Page 5 and 6: METAL-CUTTING TURBOSHEARS 16 GAUGE
- Page 7 and 8: QUARTER PANEL TURBOXTOOLS QUARTER P
- Page 9 and 10: METAL-CUTTING AIR POWERED TURBOSHEA
- Page 11: DOOR SKIN AIR POWERED TURBOXTOOLS D
- Page 15 and 16: METAL WORKING TOOLS SPOT WELD CUTTE
- Page 17 and 18: METAL BENDING TOOLS HAND SEAMERS WI
- Page 19 and 20: TOOLBOX ESSENTIALS ONE-INCH NOTCHER
QUARTER PANEL AIR POWERED TURBOXTOOLS<br />
QUARTER PANEL<br />
HEMMING<br />
AIR TOOL<br />
Use air power to bend and<br />
close wheel arc flanges of<br />
replacement quarter panels<br />
with speed, precision and<br />
limited manual tacking.<br />
QHT1A<br />
• One-hand operation.<br />
• Quickly hem quarter panels on late model<br />
cars with a range of wheel arc flange<br />
widths up to 3/4 inch (19.05 mm).<br />
• Anvil and hammer head may be cleaned<br />
of any adhesive residue from hemming<br />
operation using a common solvent.<br />
• Long wearing Anvil and Hammer<br />
are easily replaced on the job.<br />
2600<br />
RPM<br />
2600<br />
TR/Min<br />
4 CFM, 133 L/Min<br />
90 PSI, 6.2 Bar<br />
BEST NEW<br />
COLLISION REPAIR &<br />
REFINISH PRODUCT<br />
2014 AWARD<br />
WINNER<br />
Bull nose face orientation: Tighten lower set<br />
screw to secure head. Use rounded bull nose face<br />
to roll over flange.<br />
Flat face orientation: Tighten striking angle before<br />
tightening head. Use flat face to close and seal<br />
seam.<br />
Hem replacement quarter<br />
panels on late model cars<br />
up to 80% faster!<br />
DOOR SKIN HEMMING AIR TOOL TURBOSHEARS<br />
TOOL CAPACITY WEIGHT REPLACEMENT PARTS<br />
DHT1A Door Skin Hemming 20 gauge (0.91 mm) 4.0 lbs (1.81 kg) DHTRA (Anvil)<br />
Air Tool Turboshear<br />
QHT1A Quarter Panel Hemming 28-22 gauge (0.38-0.76 mm) 3.5 lbs (1.59 kg) QHT1RA (Anvil)<br />
Air Tool Turboshear<br />
QHT1RH (Hammer)<br />
12