SL16352 Malco AutoBody Tools Catalog 2015
METAL-CUTTING Drill ATTACHMENT TURBOSHEARS OVERVIEW Quickly attaches to a drill or impact driver you already own! TSHD1 18 Gauge Metal-Cutting 360˚ 360º Rotating Head secures in any position for optimum tool clearance and material flow. Malco’s autobody tools are available either as attachments to your own corded or cordless drill, or for use with your air supply. You will be expert an using them within a few minutes. The highly adaptable attachments come with built-in adjustable locking drill clamps. When done, simply un-chuck the attachment and return the drill for other tasks. Easy to Use! Long-life, dual ball bearings Power-groove drive shaft with non-slip flats DRILL / DRIVER REQUIREMENTS: 1/4 inch (6.35 mm) Chuck, Min. 14.4V - DC, Max 7A-AC Replaceable blades 1 METAL CUTTING • QUARTER PANEL HEMMING • DOOR SKIN REMOVAL • DOOR SKIN HEMMING
METAL-CUTTING TURBOSHEARS 20 GAUGE DRILL ATTACHMENT Rugged, inexpensive and a breeze to use, the original TurboShear requires only 1/4 inch (6.35 mm) 1200 rpm drill to operate. • Cuts straight and to the left for tight round and square body patches. • Cuts thick plastic bumpers. • Two-hand operation with hand peg. • Lateral blade adjustment ensures optimum cutting performance for life of blades. Rotating Collar Feature not applicable on TS1C TS1C U.S. Patent No. D488,695 TSDCC OPTIONAL CLAMP FOR ONE HAND OPERATION 18 GAUGE DRILL ATTACHMENT For heavy-duty jobs, wide-opening jaws easily navigate body panels and layered metal. TSHD1 U.S. Patent No. 7,093,365 Drill Not Included. • One-hand operation requires minimal force to cut. • Cuts straight and to the left for tight round and square body patches. • Operates at high or low speeds for maximum control and precision. • Lateral blade adjustment ensures optimum cutting performance for life of blades. 360˚ Cut body panels or remove damaged areas with ease! Make cleaner and more precise cuts than with a corded power shear at a fraction of the cost. Cut easily right down a line, make sharp turns, and even cut circles in steel, aluminum, rubber, or plastic. Cleaner and safer than a grinder and less stressful than using manual shears. There’s no dust, debris, or thin metal strip creation and no heat, no melted coatings. A good choice for shops working on both aluminum and steel vehicles. 2
- Page 1: PROFESSIONAL COLLISION REPAIR & AUT
- Page 5 and 6: METAL-CUTTING TURBOSHEARS 16 GAUGE
- Page 7 and 8: QUARTER PANEL TURBOXTOOLS QUARTER P
- Page 9 and 10: METAL-CUTTING AIR POWERED TURBOSHEA
- Page 11 and 12: DOOR SKIN AIR POWERED TURBOXTOOLS D
- Page 13 and 14: QUARTER PANEL AIR POWERED TURBOXTOO
- Page 15 and 16: METAL WORKING TOOLS SPOT WELD CUTTE
- Page 17 and 18: METAL BENDING TOOLS HAND SEAMERS WI
- Page 19 and 20: TOOLBOX ESSENTIALS ONE-INCH NOTCHER
METAL-CUTTING<br />
Drill<br />
ATTACHMENT<br />
TURBOSHEARS<br />
OVERVIEW<br />
Quickly attaches<br />
to a drill or<br />
impact driver you<br />
already own!<br />
TSHD1<br />
18 Gauge<br />
Metal-Cutting<br />
360˚<br />
360º Rotating Head secures in any position for<br />
optimum tool clearance and material flow.<br />
<strong>Malco</strong>’s autobody tools are available<br />
either as attachments to your own<br />
corded or cordless drill, or for use<br />
with your air supply.<br />
You will be expert an using them within a few minutes. The highly<br />
adaptable attachments come with built-in adjustable locking drill<br />
clamps. When done, simply un-chuck the attachment and return<br />
the drill for other tasks.<br />
Easy to Use!<br />
Long-life, dual<br />
ball bearings<br />
Power-groove drive shaft<br />
with non-slip flats<br />
DRILL / DRIVER REQUIREMENTS:<br />
1/4 inch (6.35 mm) Chuck, Min. 14.4V - DC, Max 7A-AC<br />
Replaceable blades<br />
1<br />
METAL CUTTING • QUARTER PANEL HEMMING • DOOR SKIN REMOVAL • DOOR SKIN HEMMING