SL16352 Malco AutoBody Tools Catalog 2015

METAL WORKING TOOLS
SPOT WELD
CUTTER KIT
• Includes: 3/8-inch double ended cutter,
five replacement cutter bits, center drill and
5/16-inch cobalt drill bit.
Remove spot welds
in one step and save
valuable time.
A non-walking self-centering bit lets you drill the
center pilot hole and then continue with the
weld cutting process immediately with the
attached cutter bit. Finish removing the
weld without needing to change bits.
The depth adjustment ensures drilling
only through the top panel without
damaging the second panel below.
Individual replacement parts sold separately:
SW2: 3/8 inch Spot Weld Cutter Assembly
SW3: 5/16 inch Cobalt Spot Weld Drill Bit
SW4: Spot Weld Replacement Kit: (3) 3/8 ich Cutter Bits and (1) Center Drill Bit
COMPLETE TORX
SOCKET KIT
• 12 socket drive torx bits.
• 3 hex drive adapters for 1/4, 3/8 and
1/2-inch square socket drives.
• CONNEXT3 ratcheting handle
with 1/4-inch hex holder.
• Durable polymer storage case.
T15
1/4 x 1/4 inch
1/4 x 3/8 inch
1/4 x 1/2 inch
SW1
TXSA1
(3 Adapters)
SCREW
EXTRACTOR KIT
• Kit contains 10 pieces total, including: 5 straight-fluted,
extra-bite, hardened alloy steel extractors (Sizes #1-5)
and 5 matched left-handed cobalt drill bits: 5/64, 7/64,
5/32, 1/4 and 19/64 inch.
• Use for screw and bolt
diameters of 1/4 inch (M3)
to 5/8 inch (M15).
Individual replacement parts sold separately:
SE1: #1 Extr. & 5/64-inch Cobalt Drill Bit
SE2: #2 Extr. & 7/64-inch Cobalt Drill Bit
SE3: #3 Extr. & 5/32-inch Cobalt Drill Bit
SE4: #4 Extr. & 1/4-inch Cobalt Drill Bit
SE5: #5 Extr. & 19/64-inch Cobalt Drill Bit
CONNEXT3
Ratcheting Handle
TXSK1 Kit
SEK1
Forward
Reverse
Locked
You’ll have the right
sized star socket bits
on hand for removing and replacing fenders, door handles,
headlamps, pickup tailgates, and other parts. The kit comes with
every size of star socket drive bits from T15 to T70, equipping
you for almost all star socket situations. A great buy compared
to typical competing kits which provide only the smaller sizes or
the higher end bits. The Malco CONNECT3 reversing ratcheting
handle is included. Not for use with impact drivers.
T20 T25 T27 T30 T40 T45 T47 T50 T55 T60 T70
1-1/2 inch 1-7/8 inch 2-1/4 inch
Warning: Not for use
with impact drivers.
Sockets also sold individually.
14