SL16352 Malco AutoBody Tools Catalog 2015
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
QUARTER PANEL AIR POWERED TURBOXTOOLS<br />
QUARTER PANEL<br />
HEMMING<br />
AIR TOOL<br />
Use air power to bend and<br />
close wheel arc flanges of<br />
replacement quarter panels<br />
with speed, precision and<br />
limited manual tacking.<br />
QHT1A<br />
• One-hand operation.<br />
• Quickly hem quarter panels on late model<br />
cars with a range of wheel arc flange<br />
widths up to 3/4 inch (19.05 mm).<br />
• Anvil and hammer head may be cleaned<br />
of any adhesive residue from hemming<br />
operation using a common solvent.<br />
• Long wearing Anvil and Hammer<br />
are easily replaced on the job.<br />
2600<br />
RPM<br />
2600<br />
TR/Min<br />
4 CFM, 133 L/Min<br />
90 PSI, 6.2 Bar<br />
BEST NEW<br />
COLLISION REPAIR &<br />
REFINISH PRODUCT<br />
2014 AWARD<br />
WINNER<br />
Bull nose face orientation: Tighten lower set<br />
screw to secure head. Use rounded bull nose face<br />
to roll over flange.<br />
Flat face orientation: Tighten striking angle before<br />
tightening head. Use flat face to close and seal<br />
seam.<br />
Hem replacement quarter<br />
panels on late model cars<br />
up to 80% faster!<br />
DOOR SKIN HEMMING AIR TOOL TURBOSHEARS<br />
TOOL CAPACITY WEIGHT REPLACEMENT PARTS<br />
DHT1A Door Skin Hemming 20 gauge (0.91 mm) 4.0 lbs (1.81 kg) DHTRA (Anvil)<br />
Air Tool Turboshear<br />
QHT1A Quarter Panel Hemming 28-22 gauge (0.38-0.76 mm) 3.5 lbs (1.59 kg) QHT1RA (Anvil)<br />
Air Tool Turboshear<br />
QHT1RH (Hammer)<br />
12
Change language