Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>How</strong> <strong>to</strong> <strong>Fix</strong> <strong>Epson</strong> <strong>Printer</strong><br />
<strong>Error</strong> <strong>0001001d</strong> ?<br />
Call 1-800-213-8289
<strong>Fix</strong> <strong>Epson</strong> <strong>Printer</strong> <strong>Error</strong> <strong>0001001d</strong><br />
<strong>Error</strong> <strong>0001001d</strong> on <strong>Epson</strong> <strong>Printer</strong> indicates that Scale CR servo<br />
parameter error. There may be a case somewhere a voltage<br />
exceeding the particular value is regarding <strong>to</strong> be applied <strong>to</strong> the<br />
CR Mo<strong>to</strong>r. In such a situation, this error message is shown and<br />
the <strong>Epson</strong> printer s<strong>to</strong>ps operating and doing other tasks. This is<br />
a common problem, which faced the many numbers of <strong>Epson</strong><br />
<strong>Printer</strong> users.
eps <strong>to</strong> <strong>Fix</strong> <strong>Epson</strong> <strong>Printer</strong> <strong>Error</strong> 0001001<br />
• Step 1: Clean CR Scale<br />
First, you should verify for dirt, paper dust, or damage <strong>to</strong><br />
the CR Scale. Make sure that you are CR Encoder<br />
Sensor and the CR Scale must be free from dust and dirt<br />
or any other foreign matters.<br />
• Step 2:- Execute Encoder:-<br />
Then you should try <strong>to</strong> execute encoder by just checking<br />
the “Maintenance Mode 2″. May be your <strong>Error</strong> <strong>0001001d</strong>,<br />
will resolve. If it is not fixed, then go <strong>to</strong> next step<br />
• Step 3:- Perform the CR Timing:-<br />
You will now require performing the CR Timing Belt<br />
Tension Adjustment. Make sure that the CR Timing Belt<br />
must be free from any defects and the belt is required <strong>to</strong><br />
be in proper tension.
• Step 4:- Check Carriage Unit:-<br />
• Make sure that you <strong>Epson</strong> <strong>Printer</strong> Carriage Unit must<br />
slide smoothly, free from undue load.<br />
• Step 5:- Determine the Resistance:-<br />
• You should measure the resistance value of the CR<br />
Mo<strong>to</strong>r that is (19.3 ± 10% [Ω]). In case, you did not find<br />
the CR Mo<strong>to</strong>r in short, modes, then you have needed <strong>to</strong><br />
replace the CR Mo<strong>to</strong>r Assy, also at the same time, you<br />
need <strong>to</strong> replace the CR Encoder Sensor and Replace<br />
the MAIN Board.<br />
• Step 6:- Check Connection:-<br />
• Ensure that all the harness is connected properly, and<br />
they free from short circuit or broken wire.<br />
• In this way, you can troubleshoot <strong>Epson</strong> <strong>Printer</strong> <strong>Error</strong><br />
<strong>0001001d</strong>.
Call <strong>Epson</strong> <strong>Printer</strong> Support Phone<br />
Number for Urgent Support
Get In Touch With US<br />
http://www.epsonprintersupportnumbers.com/<br />
https://plus.google.com/101938860674288193774<br />
https://twitter.com/<strong>Epson</strong>printerhel<br />
https://www.linkedin.com/in/epson-printer-support-number