fastening & assembly solutions and technology - Approved Business
fastening & assembly solutions and technology - Approved Business fastening & assembly solutions and technology - Approved Business
FAST OCTOBER 2011 HOW TO: SPECIFY SPECIAL FASTENERS Giving performance cars an aerodynamic edge Traditionally the high performance sector of the motor industry used a simple system of a sliding linch pin, mounted on the panel surface, to fasten removable body parts on competition cars. A perfectly acceptable solution which performed satisfactorily but looks a little dated on modern high performance race and rally cars The AeroCatch shear pin latch was conceived, designed and manufactured by Specialty Fasteners & Components in Totnes, South Devon and was released to the market in January 2005 as a modern aerodynamic design for fastening bonnet, boot and tailgate panels specifically for the motorsport industry. AeroCatch was designed to achieve the same effect but with all the locking mechanism below the surface of the panel. A secondary lock design feature ensures a positive closure and from a safety aspect the AeroCatch handle is highly visible when in the open position thereby reducing the risk of the bonnet not being securely fastened, an experience many had previously experienced with the traditional arrangement. 30 During the course of launch year 2005 AeroCatch was quickly adopted by leading race and rally teams in the UK, and come the end of the year was fitted to many championship winners the most notable of which being the Dunlop MSA BTCC champions Team Halfords Honda Integra-R. As the 2006 motorsport season fast approached dealers were appointed in countries with active motorsport participation and work started on building on the success of 2005. Racing car designers were taking note of the new product and requests for 3D computer aided design files increased. With dealers now appointed in the USA, Germany, Brazil and Australia, countries all with a solid motorsport history, sales began to increase steadily as new car design and builds were undertaken. Built in Cheshire, the BAC MONO was designed to bring formula race car levels of handling, performance and thrill to the public road. At 520 bhp/ton, its power to weight ratio surpasses that of the Bugatti Veyron and it can accelerate to 60 mph in just 2.8 seconds and has a top speed of 170 mph. The car’s aerodynamics were optimised in partnership with Stuttgart University and it is constructed in carbon fibre with a tubular steel driver safety cell. The bonnet panel is fitted with an Aerocatch fastener. Now into its 7th year of production the original AeroCatch has been joined by AeroCatch2 and from January 2011 AeroCatch3 a shear and tension latch designed to meet the demands of the sports prototype style of race car. AeroCatch is fast becoming the panel fastener choice for leading motor industry manufacturers motorsport programmes around the world. The list is still growing but now includes Aston Martin, BMW, Chevrolet, Ginetta and Lamborghini, to name but a few. The pedestrian friendly nature of the AeroCatch design, no parts protruding through the panels, has been an important feature for the road tuning market and, as with the race and rally markets, the road tuning sector has taken to the AeroCatch range. Widely used in the tuning industry in the UK, Japan and USA, AeroCatch is now available in a choice of finish, traditional black, carbon look and white with the key locking style proving highly popular in this market sector. AeroCatch is a success story for a new product designed, developed and manufactured in the South West of England. All tooling and component suppliers are local for the complete AeroCatch range ensuring production and ongoing developments meet the highest quality requirements for the demanding industry in which AeroCatch is used. Now available from officially appointed dealers in over 30 countries, including Denmark, Germany, Italy, Spain, South Africa, USA and more AeroCatch is fast becoming a recognised Global brand and has earned a reputation as being the panel fastener of choice; it can be seen in action most weekends at motorsport events around the world. SPECIALTY FASTENERS & COMPONENTS 01803 868677
FAST OCTOBER 2011 Ingenious solutions optimise stowage space Stowage space is always at a premium whatever the application and a typical problem area is accessing drawers installed at above waist height. Accuride has come up with an ingenious solution to this with their tilt and slide system. When the drawer is opened the drawer slide system Accuride’s double handle drawer mechanism is activated by a centrally located push button on this fire appliance tilts the drawer forward giving easy access to its contents. The system is easy to fit and fully adjustable, even with the drawer in place. The tilt can also be varied by the installer depending on the height of the drawer. Side rollers, which act as buffers for the drawer, can be adjusted via cams at the front even with the drawer in place. This is a much improved feature that will help installers fit the drawer neatly. Side dampers soften the drop and the distinctive red rollers smoothly guide the drawer open and close. Another new product that compliments this system is a rugged double handle drawer lock in / lock out mechanism activated by a centrally located push button. The yellow push button is easily seen under sodium lamps, but is also available in red if required. The locking handle can also be used in tandem with Accuride’s heavy duty, extension slides. A lock-out conversion kit is a simple and cost-effective add-on to give total stability to the drawer when fully opened. Accuride products are available in the UK from SPECIALTY FASTENERS & COMPONENTS 01803 868677 HIGH PERFORMANCE ADHESIVE TECHNOLOGY � 1 & 2 Part Structural Adhesives � UV Curing Adhesives � Conductive Adhesives � Instant Adhesives � Ultra High Temperature Adhesives � High Performance Adhesive Tapes Bonham Drive, Eurolink Industrial Estate, Sittingbourne, Kent ME10 3RY www.eurobond-adhesives.co.uk sales@ eurobond-adhesives.co.uk T 01795 427888 31
- Page 1: FASTENING & ASSEMBLY SOLUTIONS AND
- Page 4 and 5: FAST OCTOBER 2011 FASTCONTENTS REGU
- Page 6: FAST OCTOBER 2011 FASTUPDATES Pay s
- Page 10: FAST OCTOBER 2011 FASTUPDATES Hose
- Page 14 and 15: FAST OCTOBER 2011 FASTUPDATES Movin
- Page 16 and 17: �����������
- Page 18 and 19: FAST OCTOBER 2011 FASTQ & A Innovat
- Page 20 and 21: FAST OCTOBER 2011 PRODUCT REVIEW: Q
- Page 22 and 23: FAST OCTOBER 2011 FASTPROFILE Custo
- Page 24: FAST OCTOBER 2011 SPECIAL FASTENERS
- Page 29: cost effective production method wa
- Page 34 and 35: FAST OCTOBER 2011 ENCAPSULANTS The
- Page 37 and 38: Bespoke hinge becomes the standard
- Page 39 and 40: Advanced fastener design for plasti
- Page 41 and 42: In mobile phones OCAs ensure invisi
- Page 43 and 44: Technical advice Overnight shipping
- Page 45 and 46: The firewall for the Volvo cab to h
- Page 47 and 48: It’s encouraging to hear a suppli
- Page 49 and 50: The Machinery Directive anticipates
- Page 51 and 52: Fasteners deployed in key military
- Page 53 and 54: Meeting the aesthetic demands of th
- Page 55: eductions; add to that subsequent o
- Page 58 and 59: FAST OCTOBER 2011 FASTPRODUCTS Wet
- Page 60 and 61: FAST OCTOBER 2011 FASTPRODUCTS Inst
- Page 62 and 63: FAST OCTOBER 2011 FASTPRODUCTS: Sec
- Page 65 and 66: Product developments serve broader
- Page 67 and 68: Improved accuracy for servo press r
- Page 69 and 70: Lubricant-free linear drive system
- Page 72 and 73: FAST OCTOBER 2011 72 Collect your f
- Page 74 and 75: FAST OCTOBER 2011 74 AXSON UK LTD A
- Page 76 and 77: FAST OCTOBER 2011 76 ELESA (UK) LTD
- Page 78 and 79: FAST OCTOBER 2011 78 LEE SPRING LTD
FAST OCTOBER 2011<br />
Ingenious <strong>solutions</strong> optimise stowage space<br />
Stowage space is always at a premium whatever the application<br />
<strong>and</strong> a typical problem area is accessing drawers<br />
installed at above waist height. Accuride has come up with<br />
an ingenious solution to this with their tilt <strong>and</strong> slide system.<br />
When the drawer is opened the drawer slide system<br />
Accuride’s double h<strong>and</strong>le drawer mechanism is activated by a centrally<br />
located push button on this fire appliance<br />
tilts the drawer forward giving easy access to its contents.<br />
The system is easy to fit <strong>and</strong> fully adjustable, even with the<br />
drawer in place. The tilt can also be varied by the installer<br />
depending on the height of the drawer. Side rollers, which<br />
act as buffers for the drawer, can be adjusted via cams at<br />
the front even with the drawer in place. This is a much<br />
improved feature that will help installers fit the drawer<br />
neatly. Side dampers soften the drop <strong>and</strong> the<br />
distinctive red rollers smoothly guide the drawer open<br />
<strong>and</strong> close.<br />
Another new product that compliments this system<br />
is a rugged double h<strong>and</strong>le drawer lock in / lock out<br />
mechanism activated by a centrally located push button.<br />
The yellow push button is easily seen under sodium<br />
lamps, but is also available in red if required. The locking<br />
h<strong>and</strong>le can also be used in t<strong>and</strong>em with Accuride’s<br />
heavy duty, extension slides. A lock-out conversion kit is<br />
a simple <strong>and</strong> cost-effective add-on to give total stability<br />
to the drawer when fully opened.<br />
Accuride products are available in<br />
the UK from<br />
SPECIALTY FASTENERS & COMPONENTS 01803 868677<br />
HIGH PERFORMANCE<br />
ADHESIVE TECHNOLOGY<br />
� 1 & 2 Part Structural Adhesives<br />
� UV Curing Adhesives<br />
� Conductive Adhesives<br />
� Instant Adhesives<br />
� Ultra High Temperature Adhesives<br />
� High Performance Adhesive Tapes<br />
Bonham Drive, Eurolink Industrial Estate,<br />
Sittingbourne, Kent ME10 3RY<br />
www.eurobond-adhesives.co.uk<br />
sales@ eurobond-adhesives.co.uk<br />
T 01795 427888<br />
31