MONEY and GOODS TRANSFER UNITS - sitec

MONEY and GOODS TRANSFER UNITS
SITEC manufactures money and goods transfer units. These are mainly used for money deliveries at national banks, and financial
institutions and concerns. However, goods transfer units are also required in industrial companies, such as e.g. chip card production or in
data processing companies.
In this section you will find units which can be installed in a counter, facade or partition wall.
There are transfer units for a wide variety of applications and structural conditions. We can offer many standard solutions - but we also, of
course, make to customer requirements.
The transfer units can be supplied complete with glazed counters, our DELTA intercom or a suitable cash trolley.
The transfer units are available up to the highest security classifications for bullet, break-in and fire resistance.
Please contact us for further details.
Link:
http://www.sitec.de/en/products/locks-for-material-and-money/
2012-12-12 18:15
Subject to technical changes
P 8041 - Transfer Unit
ready-to-install for indoor use
with bullet-resistant glazing to BR3-S in a surrounding steel frame with a textured, lacquered
finsih, counter surface in linen-faced stainless steel with integrated
FB4, Intercom System DELTA ready-to-plug-in and Container Lock P 9045 with doors in
FB4
Suitable for: Security areas of financial institutes, central banks, security
companies, goods issue, data processing centres
Installation: in completely plastered brick wall or partition wall
Wall opening: W x H x D = 1.000 x 2.000 x strength of wall ..... mm
Pass-through size: W x H x D = 660 x 900 x 900 mm
Execution: Textured, lacquered finish in light-grey RAL 7035, special
colours on request
Bullet-resistance class: German standard BVG C 9 (UVV-Kassen), glass in BR 3 - S,
Transfer Tray and Doors of Container Lock in FB4 (DIN EN
1522)
P 8140 - Transfer Unit
As a flush-mounted counter, completely ready-to install. With bullet-resistant glazing to
BR3-S in a surrounding steel frame with a textured, lacquered finish, counter surface in
linen-faced stainless steel with integrated, flush-mounted front-opening tray P 7097 in FB 4,
Intercom System DELTA ready- to-plug-in and Container Lock P 9045 with doors in FB 4
Suitable for: Security areas of financial institutions, central banks, security
companies, goods issue, data processing companies
Installation: in completely plastered brick wall or partition wall
Wall opening: W x H x D = 1000 x 2000 x strength of wall ... mm
Drive-through size: W x H x D = 660 x 815 x 900 mm
© SITEC GmbH 2000 — 2012
Johann-Georg-Herzog-Str. 19
D-96369 Weissenbrunn • Germany
Tel. +49 (0) 9261 - 60 75 0 • Fax +49 (0) 9261 - 60 75 10
eMail: info@sitec.de • http://www.sitec.de
Page 1 of 4

MONEY and GOODS TRANSFER UNITS
Execution: Textured, lacquered finish in light-grey RAL 7035, special
colours on request
Bullet-resistance class: German standard BVG C9 (UVV-Kassen), glass in BR 3-S,
front-opening tray and doors of container lock in FB 4 (DIN EN
1522)
P 9020 - Container Lock
Material lock with two sliding doors that open in turns, with electronic drive for
driving-through transport trays. For installation into table desk or wall.
Suitable for: banks, financial institutions, security companies, data processing
companies
Installation: Inside table desk or completely plastered wall
Outer size: W x H x D = 1750 x 995 x 1000 mm
Pass-through size: W X H x D = 680 x 915 x 900 mm
Execution: Textured, lacquered finish in deep black, RAL 9005
Bullet-resistance class: Doors in FB 4 - NS and FB 6 - NS
P 9045 - Container Lock
Material Lock with two revolving doors that open in turns, with electronic door control to drive through trolleys for money and
material. Protection strips at the doors and inner sides prevent from damaging the lock by trolleys. For installation into table desk or wall.
Suitable for: Banks, Financial Institutes, Security Companies, Data Processing Centres
Installation: Inside into table desk or completely plastered wall
Wall opening: W x H x D = 840 x 978 x 992 mm
Pass-through size: W x H x T = 680 x 928 x 900 mm
Execution: Frame and doors textured, lacquered finish in RAL 9005, jet black; casing and buffer strips in
V2a stainless steel
Bullet-resistance class: Doors in FB 4 - NS and FB 6 - NS
P 9050 - Container Lock
Material lock with two double wing doors that open in turns, with electronic door control.
Suitable for: banks, financial institutions, security companies, data processing companies
Installation: Indoors table desk or completely plastered wall
Outer size: W x H x D = 644 x 644 x 600 mm
Pass-through size: W x H x D = 454 x 504 x 500 mm
Execution: textured, lacquered finish in deep black, RAL 9005
Bullet-resistance class: Doors in FB 4 - NS and FB 6 - NS
Link:
http://www.sitec.de/en/products/locks-for-material-and-money/
2012-12-12 18:15
Subject to technical changes
P 9060 - Container Lock
Material lock with two double wing doors that open in turns, with electronic door control
© SITEC GmbH 2000 — 2012
Johann-Georg-Herzog-Str. 19
D-96369 Weissenbrunn • Germany
Tel. +49 (0) 9261 - 60 75 0 • Fax +49 (0) 9261 - 60 75 10
eMail: info@sitec.de • http://www.sitec.de
Page 2 of 4

MONEY and GOODS TRANSFER UNITS
Link:
http://www.sitec.de/en/products/locks-for-material-and-money/
2012-12-12 18:15
Subject to technical changes
Suitable for: banks, financial insitutions, security companies, data processing
companies
Installation: Inside table desk or completely plasterd wall
Outer size: W x H x D = 844 x 844 x 800 mm
Pass-through size: W x H x D = 654 x 704 x 700 mm
Execution: textured, lacquered finish in deep black, RAL 9005
Bullet-resistance class: Doors in FB 4 - NS and FB 6 - NS
P 9400 - Combination Lock
for transport trays, money and parcels. Consisting of container lock P 9040 and on-desk lock
P 9000. On-desk lock with double wing doors which are bolt against each other; P 9000 with
two electronic driven bullet-proof glazing, lifting windows that open upwards in turns.
Suitable for: National and major banks, cash transport companies, financial
institutions
Installation: indoors into brickwork or partition walls onto finished floor
Outer size: W 1460 mm, D 954 mm, H 3000 mm
Pass-through
W 900 mm, D 1 160 mm, H 945 mm
size: Container lock P
9040:
Pass-through
W 1190 mm, D 640 mm, H 840 mm
size: On-desk lock P 9000:
Bullet-resistance class: up to FB 6
P 9000 - Material- and Money Lock
Lock with 2 counter-moving lifting windows with electronic drive for installation onto a table
desk.
Suitable for: National- and major banks, cash transport companies, financial
institutions, data processing companies
Installation: Inside, on top of a counter
Wall opening: W 1460 mm, D 954 mm, H 1950 mm
Pass-through size: W 1200 mm, D 640 mm, H 840 mm
Execution: according to customer's request
Bullet-resistance class: up to FB 7
P 9500 - Material and Money Lock
Combination lock with two double wing swing doors with electronic drive for the installation
on the floor. Moveable counter desk inside. Suitable for passing-through luggage, transport
trays and partly also for passengers.
Suitable for: National and major banks, financial institutions, cash transport
companies, data processing companies
Installation: indoors in walls on finished floor
Outer size: W 1490 mm, D 1700 mm, H 2200 mm
© SITEC GmbH 2000 — 2012
Johann-Georg-Herzog-Str. 19
D-96369 Weissenbrunn • Germany
Tel. +49 (0) 9261 - 60 75 0 • Fax +49 (0) 9261 - 60 75 10
eMail: info@sitec.de • http://www.sitec.de
Page 3 of 4

MONEY and GOODS TRANSFER UNITS
Link:
http://www.sitec.de/en/products/locks-for-material-and-money/
2012-12-12 18:15
Subject to technical changes
Pass-through size: W 1180, D 1480 mm, H 2000 mm
Execution: depends on customer's wish
Bullet-resistance class: up to FB 6/ BR6 - NS (DIN EN 1522/ 1063)
P 9600 - Material and Money Lock
Combination lock with a rotation cylinder inside with electronic drive for installation on the
floor. Moveable counter desk inside. Suitable for passing-through luggage, transport trays
and partly also for passengers.
Suitable for: National and major banks, financial institutions, cash transport
companies, data processing companies
Installation: Indoors in walls on finished floor
Outer size: W 1760 mm, D 1760 mm, H 2600 mm
Pass-through size: W 790 mm, D 1000 mm, H 2000 mm
Execution: depends on customer's wish
Bullet-proof resistance: up to FB 6
P 9600 - Material and Money Lock
Combination lock with a rotation cylinder inside with electronic drive. As Y-lock for 3 ways.
Moveable counter desk inside. Suitable for passing-through luggage, transport trays and
partly for passengers.
Suitable for: National and major banks, financial institutions, cash transport
companies, data processing companies
Insallation: Indoors in walls on finished floor
Outer size: W 1760 mm, D 1760 mm, H 2600 mm
Pass-through size: W 790 mm, D 1000 mm, H 2000 mm
Execution: depends on customer's wish
Bullet-resistance class: up to FB 6
P 9240 - Container and Rotation Lock
Material lock with vertical rotation cylinder with electronic drive for driving-through materials,
for installation into table-desk or wall. Mechanical drive.
Suitable for: banks, financial institutions, cash transport companies, data
processing companies
Installation: indoors in table desks or walls
Outer size: W 1120 mm, D 1000 mm, H 840 mm
Pass-through size: W 670 mm, D 900 mm, H 650 mm
Execution: stainless steel, or textured, lacquered finish
© SITEC GmbH 2000 — 2012
Johann-Georg-Herzog-Str. 19
D-96369 Weissenbrunn • Germany
Tel. +49 (0) 9261 - 60 75 0 • Fax +49 (0) 9261 - 60 75 10
eMail: info@sitec.de • http://www.sitec.de
Page 4 of 4