05.07.2017 Views

Mercedes-Benz-W212-instrukcja-obslugi

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Anti-theft systems 73<br />

motorcycles and vehicles driving offset from<br />

your vehicle center.<br />

G Warning<br />

Depending on the vehicle speed, PRE-SAFE ®<br />

Brake brakes your vehicle with a maximum of<br />

13 ft/s 2 (4 m/s 2 ) before a possible hard stop.<br />

This corresponds to about 40 % of the<br />

maximum deceleration ability of your vehicle.<br />

The driver must apply the brakes additionally<br />

in order to prevent a collision. The self-acting<br />

hard stop will be initiated when the imminent<br />

danger of a collision exists, e.g. when an<br />

evasive maneuver cannot avoid an accident.<br />

In order to maintain the appropriate distance<br />

to the vehicle in front and thus prevent a<br />

collision, you must apply the brakes yourself.<br />

At speeds up to approximately<br />

40 mph (70 km/h), PRE-SAFE ® Brake can<br />

also detect stationary obstacles, for example<br />

stopped or parked vehicles.<br />

G Warning!<br />

If you do not receive visual or acoustic<br />

warning signals, the PRE-SAFE ® Brake may<br />

Rnot have recognized the collision risk<br />

Rhave been deactivated<br />

Rbe malfunctioning<br />

Apply the brakes yourself to avoid a collision.<br />

X To activate: activate PRE-SAFE ® Brake in<br />

the on-board computer (Y page 228).<br />

The Ä symbol appears in the lower<br />

multifunction display, as long as the HOLD<br />

function is not activated (Y page 188).<br />

On vehicles with parking guidance, the P<br />

gear must be engaged for the icon to be<br />

displayed.<br />

For PRE-SAFE ® Brake to assist you when<br />

driving, the radar sensor system must be<br />

switched on and operational.<br />

PRE-SAFE ® Brake does not always detect<br />

complex traffic situations properly. You can<br />

terminate the braking action of PRE-SAFE ®<br />

Brake in a non-critical driving situation at any<br />

time if:<br />

Ran acoustic and visual warning occurs<br />

Rthe vehicle brakes<br />

To end this, you can either depress the<br />

accelerator pedal further, activate kickdown<br />

or release the brake pedal.<br />

The braking action of PRE-SAFE ® Brake is<br />

ended automatically if:<br />

Ryou maneuver to avoid the obstacle<br />

Ryou drive slower than approximately<br />

9 mph (15 km/h)<br />

Rthere is no longer an obstacle detected in<br />

front of your vehicle<br />

Rthere is no longer any danger of a collision<br />

Following a collision or accident-related<br />

damage to the front end of the vehicle, have<br />

the configuration and operation of the radar<br />

sensors checked. Choose a qualified<br />

specialist workshop for this which has the<br />

necessary specialist knowledge and tools for<br />

the work required. <strong>Mercedes</strong>-<strong>Benz</strong><br />

recommends that you use an authorized<br />

<strong>Mercedes</strong>-<strong>Benz</strong> Center for this purpose.<br />

Anti-theft systems<br />

Immobilizer<br />

The immobilizer prevents your vehicle from<br />

being started without the correct key.<br />

When leaving the vehicle, always take the<br />

SmartKey with you and lock the vehicle. The<br />

engine can be started by anyone with a valid<br />

key that is left inside the vehicle.<br />

X To activate with the SmartKey: remove<br />

the SmartKey from the ignition lock.<br />

X To activate with KEYLESS-GO: switch the<br />

ignition off and open the driver's door.<br />

X To deactivate: switch on the ignition.<br />

Safety<br />

Z

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!