Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• Case 2: Terminal ID = “2” ~ “32”<br />
IP ADDRESS<br />
OK?<br />
AUTO<br />
Yes<br />
——— Select “MAUAL”, if you want to enter IP address manually.<br />
(IP address setting line will appear on the screen.)<br />
——— Press to continue.<br />
* The IP address of each terminal should be the unique number from 192.168. 0. 1 to 192.168.255.255.<br />
Declare terminal configuration<br />
Date 01-10-10<br />
Time 12:34 00<br />
ID Character MC #01<br />
Check System Master<br />
Check Cluster ID 0<br />
R/J/Order Printer1 No<br />
R/J/Order Printer2 No<br />
R/J/Order Printer3 No<br />
Slip Printer No<br />
——— Enter date if it is wrong.<br />
——— Enter time if it is wrong.<br />
——— Within 12 characters<br />
——— Master / Backup master / Satellite / Self master<br />
——— Enter cluster No. “1” ~ “9”, if using check cluster system.<br />
——— No printer / UP-350 / UP-360 / SA-3015 / UP-250 for<br />
R/J or Order printer.<br />
——— No printer / SA-3015 / SP-1300<br />
OK?<br />
YES<br />
Program restoration<br />
——— Press to continue.<br />
INIT 10-10-01 12:34 000001<br />
AUTO PGM<br />
1.No Restore / Receive<br />
2.PGM Restore (CF Card)<br />
3.PGM Receive (Inline)<br />
——— Select, if no need to download any data.<br />
——— Select to download a program data from CF card.<br />
——— Select to download a program data from other terminal.<br />
• Restore from CF card.<br />
Insert the CF card into the slot and select the appropriate file and press the key.<br />
• Program receive from other terminal.<br />
INIT 10-10-01 12:34 000001<br />
Receive Data<br />
All PGM<br />
——— All Data (including totalizer) / All PGM (program only)<br />
PGM Receive from MC #05<br />
——— Select the machine to send the data.<br />
OK?<br />
YES<br />
Note:<br />
In case of using wireless inline, we recommend that you should change the ESS ID / WEP KEY<br />
character for your security.<br />
2-1-2. How to initialize the terminal (add / replace one terminal)<br />
Preparation:<br />
1. All peripheral devices and terminals of this cluster should be turned off.<br />
2. Connect all of the peripheral devices (such as printer, display etc.) to this terminal.<br />
3. Connect the added / replaced terminal to inline.<br />
Operation:<br />
Follow the steps shown on the page 5 to 6.<br />
— 6 —