Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
[ 15 ] External printer print test<br />
[Function]<br />
This test will check the print test for the RS232C I/F printer.<br />
Connect the printer to the COM which is to be tested.<br />
[Operation]<br />
Operation : x1 x2 x3 n 0 3 d ST<br />
X1:Print test pattern (0 = A pattern, 1 = B pattern)<br />
X2:Port selection (1 = COM1, 2 = COM2, 3 = COM3, 4 = COM4, 5 = COM5, 6 = COM6)<br />
X3:Baud rate selection (1 = 4800 bps, 2 = 9600 bps, 3 = 19.2 kbps)<br />
n: 0 = One time check (can be omitted)<br />
not 0 = Continuous check (To stop the test, press "ESC" key)<br />
d: Printer type selection (1 = RJ, 2 = SLIP)<br />
Note that some printers cannot use certain baud rates. Refer to the list below.<br />
When changing the baud rate, make sure to change the setting for the printer also.<br />
[LCD]<br />
19.2 Kbps 9600 bps 4800 bps<br />
SLIP PRINTER (SP1300) ✕ Ο Ο<br />
RJ PRINTER (UP250/350/360) Ο Ο Ο<br />
PRT<br />
END<br />
xxxn03d<br />
xxxn03d<br />
Error display<br />
When the printer is not connected<br />
NON PRINTER ERR<br />
[PRINT]<br />
Printing pattern is the following 2 types.<br />
The number of lines : 40 lines for RJ and 35 lines for SLIP.<br />
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB<br />
BBBBBBBBBBBBBBBBBBBBB *8,888,88<br />
A pattern<br />
B pattern<br />
— 40 —