Teximp Product guide English

CNC Lathes
Lathes
The New Generation Haas turning centres were
designed from the ground up to be extremely rigid,
highly accurate, and very thermally stable. All castings
were optimized using finite element analysis (FEA) to
produce the most rigid designs, while improving chip
and coolant flow, and simplifying maintenance
and service. The
spindle heads feature a
compact, symmetrical
design for thermal stability
and rigidity, and the
45-degree wedge design
greatly increases the
tool-mounting envelope
and improves chip flow.
lathes
ST-10 ST-10Y ST-15 ST-15Y ST-20 ST-20SS ST-20Y ST-20SSY ST-25 ST-25Y ST-30
max. cutting length (mm) 356 356 356 356 521 521 521 521 533 533 660
max. cutting diameter (mm) 286 229 356 229 381 254 305 254 381 381 533
chuck size (mm) 165 165 210 210 210 210 210 210 254 254 254
bar capacity (mm) 44 44 63,5 63,5 51 51 51 51 76 76 76
swing diameter over front apron (mm) 413 413 641 641 806 806 806 806 806 806 806
swing diameter over cross slide (mm) 413 413 413 413 527 527 527 527 527 527 527
x axis travel (mm) 165 165 200 200 236 236 236 236 236 236 324
z axis travel (mm) 356 356 356 356 533 533 533 533 533 533 660
y axis travel (mm) ± 51 ± 51 ± 51 ± 51 ± 51
rapids x 30.4 m/min 30.4 m/min 30.4 m/min 12 m/min 24 m/min 24 m/min 24 m/min 24 m/min 24 m/min 12 m/min 24 m/min
rapids z 30.4 m/min 30.4 m/min 30.4 m/min 30.4 m/min 24 m/min 30.4 m/min 30.4 m/min 30.4 m/min 24 m/min 24 m/min 24 m/min
rapids y 18 m/min 12 m/min 18 m/min 18 m/min 12 m/min
spindle rpm 6000 6000 4000 4000 4000 5000 4000 5000 3400 3400 3400
spindle bore (mm) ø 58 ø 58 ø 88.9 ø 88.9 ø 88.9 ø 88.9 ø 88.9 ø 88.9 ø 88.9 ø 88.9 ø 88.9
spindle nose A2-5 A2-5 A2-6 A2-6 A2-6 A2-6 A2-6 A2-6 A2-6 A2-6 A2-6
turret / no. of tools 12 stations 12 stations 12 stations 12 stations 12 stations 24 stations 24 stations 24 stations 12 stations 12 stations 12 stations
- 14 -