12.12.2012 Views

otoplastik - Battery Benelux

otoplastik - Battery Benelux

otoplastik - Battery Benelux

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Die Die vielseitige vielseitige T TTechnik<br />

T echnik mit mit mit Silikon- Silikon- Silikon-<br />

Heißvulkanisat Heißvulkanisat egger egger flex<br />

flex<br />

Vor or orteile: orteile:<br />

teile:<br />

- sehr reißfestes, flexibles Silikonmaterial<br />

- verfügbar in 30, 50 und 70 shore (je niedriger der Wert,<br />

desto weicher das Material)<br />

- große Auswahl an Farben<br />

- Catamaran für schwimmfähige Spritzwasser-<br />

Schutzplastiken<br />

- für Otoplastiken und Gehörschutz<br />

- sehr wirtschaftlich bei großen Stückzahlen<br />

The The versatile versatile method method with with silicone silicone hot<br />

hot<br />

curing curing material material egger egger flex<br />

flex<br />

Advantages:<br />

Advantages:<br />

- very tearproof, flexible silicone material<br />

- available in 30, 50 and 70 shore (the lower the number,<br />

the softer the material)<br />

- large variety of colors<br />

- Catamaran for buoyant splash protection earmolds<br />

- suitable for earmolds and noise protection earmolds<br />

very economical in large numbers<br />

204 egger<br />

11 min.<br />

8 h<br />

170° C<br />

338° F<br />

Produktionsprozess<br />

Produktionsprozess<br />

INFO INFO TELEFON TELEFON 0049(0)831-5811320<br />

0049(0)831-5811320<br />

0049(0)831-5811320<br />

1. egger flex Einkomponentenmaterial in die Gipsform<br />

bringen<br />

2. Micropol-Küvette schließen und mit Druckluft füllen<br />

3. Micropol-Küvette zum Ausvulkanisieren in die<br />

Mikrowelle geben<br />

4. Rohling aus der Küvette nehmen<br />

5. Rohling ca. 8 Stunden im Wärmeofen tempern<br />

6. Rohling mit speziellen EF-Fräsern ausarbeiten (siehe<br />

Seiten 227 und 228)<br />

7. Mit heißvulkanisierendem Silikon-Lack H/II lackieren<br />

Manufacturing Manufacturing Process Process<br />

Process<br />

INFO INFO PHONE PHONE +49 +49 831-5811360<br />

831-5811360<br />

831-5811360<br />

1. Fill the egger flex one component material into the<br />

plaster mold<br />

2. Close the Micropol-flask and fill with compressed air<br />

3. Put the Micropol-flask into the microwave oven for<br />

curing<br />

4. Take the blank out of the flask<br />

5. Temper the blank appr. 8 hours in the thermal oven<br />

6. Work out the blank with special EF-cutters (see pages<br />

227 and 228)<br />

7. Varnish with hot curing lacquer H/II

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!