otoplastik - Battery Benelux
otoplastik - Battery Benelux
otoplastik - Battery Benelux
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Negativform-Herstellung Negativform-Herstellung mit mit Gel-Dubliermasse<br />
Gel-Dubliermasse<br />
INFO INFO TELEFON TELEFON 0049(0)831-5811320<br />
0049(0)831-5811320<br />
Dubliermasse, Dubliermasse, 6 kg<br />
Negativform-Material auf Hydrokolloid-Basis. Aufgrund der Transparenz<br />
speziell für die Lichttechnik zur Herstellung der Form-Negative geeignet.<br />
Kann auch für die Verarbeitung von Acryl-Kaltpolymerisaten und Silikonen<br />
im Kaltverfahren eingesetzt werden. Wir empfehlen für die Aufschmelzung<br />
das Dubliergerät EDG 1.<br />
Verarbeitungstemperatur: 45 - 47° C<br />
Schmelztemperatur: 93° C<br />
Bei Einhaltung der Gebrauchsanweisung mehrfache Verwendung möglich.<br />
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○<br />
Dublier Dubliermasse Dublier masse - - Konzentrat<br />
Negativform-Material als Konzentrat auf Hydrokolloid-Basis. Aufgrund der<br />
Transparenz speziell für die Lichttechnik zur Herstellung der Form-Negative<br />
geeignet. Kann auch für die Verarbeitung von Acryl-Kaltpolymerisaten und<br />
Silikonen im Kaltverfahren eingesetzt werden. Hohes Einsparpotential von<br />
Handlingkosten durch geringes Gewicht. Wir empfehlen den Einsatz des<br />
Dubliergerätes EDG 1.<br />
Inhalt: 3 l - Anmischung mit 1,5 l Wasser ergeben ca. 5,3 kg.<br />
Bei Einhaltung der Gebrauchsanweisung mehrfache Verwendung möglich.<br />
Manufacturing Manufacturing of of Negative Negative Negative Molds Molds with with Gel<br />
Gel<br />
INFO INFO PHONE PHONE +49 +49 831-5811360<br />
831-5811360<br />
Duplicating Duplicating Material, Material, 6 kg<br />
Hydrocolloidal based material for negative molds. Due to its transparency,<br />
the material is especially suitable for the UV-curing technique. The material<br />
can also be used for processing acrylic material for cold polymerization<br />
and cold curing silicones. For the fusion we recommend to use the<br />
duplicating unit EDG 1.<br />
Processing temperature: 45 - 47° C (113 - 116.6° F)<br />
Melting temperature: 93° C (199.4° F)<br />
The material can be reused several times on condition that the manual<br />
instructions are kept.<br />
Duplicating Duplicating Material Material - - - concentrate<br />
Hydrocolloidal based material as concentrate for negative molds. Due to<br />
its transparency, the material is especially suitable for the UV technique.<br />
The material can also be used for processing acrylic material for cold<br />
polymerization and cold vulcanizing silicones. Savings in handling costs<br />
are granted due to a lower weight. We recommend to use the duplicating<br />
unit EDG 1.<br />
Contents: 3 l - a mixture with 1,5 l water produces about 5.3 kg.<br />
The material can be reused several times on condition that the manual<br />
instructions are observed.<br />
40900<br />
40900<br />
40909<br />
40909<br />
egger 145