FAIRMONT HOTELS & RESORTS -DESIGN STANDARDS

Fairmont Hotels & Resorts · Design Standards
APPENDICES
Public Washroom Stall Door (continued)
e) Wall bumper (RO) 409 US10B
f) Coat hook (VA) Interior Designer to select US10B
g) Door silencer (RO) 608
2.18 Ballroom and Meeting Room Entry Doors – (Pair with standard exiting devices):
a) Floor closers (DM) BTS 80 EMB/F 613E
b) Pivots (DM) 75233 613
c) Power transfer (VO) EPT2 SP313
d) Exit devices (SA) 12 56 WD 8610 F113 less pull US10B
e) Mortise cylinder as required
f) Decorative pulls Interior designer to select
g) Sound seal (DH) Cush n’ seal White
h) Power supply (SA) 3530
i) Key switch (SA) 4374
* Doors normally closed and secured. Access by key at all times. Egress free at
all times. When power is turned on by key switch, doors may be held in open
position by floor closer. Power on by second key switch holds exit device
latches retracted, allowing doors to be “push/pull”. Fire alarm condition cuts
power allowing doors to close and latch.
2.20 Ballroom and Meeting Room Service Doors (Pair):
a) Floor closer (DM) BTS 80 EMB/F 613E
b) Pivot (DM) 75233 613E
c) Power transfer (VO) EPT 2 SP313
d) Exit device (SA) 12 56 8810 G US10B
e) Wall bumper (RO) 409 US10B
f) Sound seal (DH) Cush n’ Seal White
g) Power supply (SA) 3530
h) Key switch (SA) 4370
REV. MARCH 2006 262
© 2002, Fairmont Hotels and Resorts. All Rights Reserved.