09.06.2017 Views

FAIRMONT HOTELS & RESORTS -DESIGN STANDARDS

Hotel Design

Hotel Design

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Fairmont Hotels & Resorts · Design Standards<br />

APPENDICES<br />

1.16 Installation<br />

A. Hardware shall be units mounted at heights directed by the Architect.<br />

Each hardware item shall be installed in strict compliance with the<br />

manufacturer’s instructions and recommendations level, plumb, and true to line<br />

and location.<br />

1.17 Adjusting, Cleaning, and Demonstrating<br />

A. The Contractor shall adjust and check each operating item of hardware and each<br />

door to ensure proper operation or function of every unit and replace units that<br />

cannot be adjusted to operate freely and smoothly or as intended for the<br />

application made.<br />

1. Where door hardware is installed more than one month prior to<br />

acceptance or occupancy of a space or area, return to the installation<br />

during the week prior to acceptance or occupancy and make final check<br />

and adjustment of all hardware items in such space or area. Clean<br />

operating items as necessary to restore proper function and finish of<br />

hardware and doors. Adjust door control devices to compensate for final<br />

operation of heating and ventilating equipment.<br />

B. Clean and repair adjacent surfaces soiled by hardware installation.<br />

C. Instruct FHR’s personnel in the proper adjustment and maintenance of door<br />

hardware and hardware finishes.<br />

D. Approximately six months after the date of Substantial Completion, the<br />

Contractor, accompanied by representatives of the manufacturers of latchsets<br />

and locksets and of door control devices, and of other major hardware suppliers,<br />

shall return to the Project to perform the following work:<br />

1. Examine and re-adjust each item of door hardware as necessary to<br />

restore function of doors hardware to comply with specified<br />

requirements.<br />

2. Consult with and instruct FHR’s personnel in recommended additions to<br />

the maintenance procedures.<br />

3. Replace hardware items that have deteriorated or failed due to faulty<br />

design, materials, or installation of hardware units.<br />

4. Prepare a written report of current and predictable problems (of<br />

substantial nature) in the performance of the hardware.<br />

REV. MARCH 2006 252<br />

© 2002, Fairmont Hotels and Resorts. All Rights Reserved.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!