FAIRMONT HOTELS & RESORTS -DESIGN STANDARDS

More documents

Recommendations

Info

Fairmont Hotels & Resorts · Design Standards SERVICES AND SYSTEMS 6.12. Testing Requirements UTP System Testing a) There are two primary field test parameters for an UTP-based end-to-end cabling system. These are continuity/wire mapping and a visual inspection, both to be performed by the vendor. b) Continuity/wire mapping is used to verify consistency pair-to-pin terminations at each end of a given cable. It also checks for faulty connections in the run. For each of the eight conductors in the cable, continuity/wire mapping indicates: Continuity of the channel to the remote end. Shorts between any two or more conductors. Crossed pairs. Reversed pairs. Split pairs. Any other mis-wiring. Optical Fiber System Testing a) There is one primary field test parameter for an optical fiber-based end-to-end system. This is attenuation testing, to be performed by the Vendor. b) Since optical signal attenuation at one wavelength is independent of the attenuation at a second wavelength, the attenuation of the channel should be measured at both standard wavelengths (850 nm and 1300 nm) for backbone links. Either wavelength can be used for the testing of horizontal links. c) Optical fiber field-test light sources must operate within 820-880 nm and/or 1280- 1320 nm wavelength range(s) for multimode system testing. Additional UTP System Testing All the parameters per TIA/EIA TSB67 must be verified using a Level II accuracy field tester. TIA/EIA TSB67 defines two post-installation test configurations for UTP telecommunications cabling systems designed in accordance with ANSI/TIA/EIA-568 requirements—a channel test configuration and a basic link test configuration. The required test configuration for this end-toend structured cabling system is the channel configuration as all the components and all possible sources of installation error are included in the testing. REV. MARCH 2006 232 © 2002, Fairmont Hotels and Resorts. All Rights Reserved.
Fairmont Hotels & Resorts · Design Standards SERVICES AND SYSTEMS 7. TECHNOLOGY SERVICES – PRODUCT SPECIFICATIONS 7.1. Cabling Overview Enhanced Category 5 UTP specifications a) The UTP-based cabling system shall have a 160 MHz channel bandwidth over a maximum distance of 100m (328 ft) and a channel power sum attenuation-tocrosstalk ratio (PSACR) of 9.6 dB @ 100 MHz using an interconnect or BIX cross connect configuration. b) The UTP-based cabling system shall use matched components from a single manufacturer, certified to deliver system performance over the lifetime of the applications that the cabling system was originally designed to support. c) All components used in the UTP-based cabling system shall be warranted for a period of 25 years from date of installation against defects in materials and workmanship. d) The UTP-based cabling system shall comply with the following standards: Enhanced Category 5 - TIA/EIA Addendum Category 5 - ANSI/TIA/EIA-568, TIA/EIA TSB67 Class D - CENELEC EN50173 Class D - ISO/IEC 11801 Optical Fiber Cabling System a) The optical fiber-based cabling system shall provide a 160 MHz-km bandwidth @ 850 nm and 500 MHz-km bandwidth @ 1300 nm using 50/125 micron 6 strand multimode optical fiber. b) The optical fiber-based cabling system shall use matched components from a single manufacturer, certified to deliver system performance over the lifetime of the applications that the cabling system was originally designed to support. c) All components used in the optical fiber-based cabling system shall be warranted for a period of 25 years from date of installation against defects in materials and workmanship. d) The optical fiber-based cabling system shall comply with the following standards: ANSI/TIA/EIA-568 CENELEC EN50173 ISO/IEC 11801 e) The optical fiber-based cabling system shall be capable of supporting the following native fiber-based applications as well as environments where native copper-based electrical signals are converted to an optical stream: Gigabit Ethernet (1000BASE-SX and LX) Fast Ethernet (100BASE-FX) REV. MARCH 2006 233 © 2002, Fairmont Hotels and Resorts. All Rights Reserved.
Page 1 and 2:
FAIRMONT HOTELS & RESORTS · DESIGN
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188: FAIRMONT HOTELS & RESORTS · DESIGN
Page 197 and 198: Fairmont Hotels & Resorts · Design
Page 237: Fairmont Hotels & Resorts · Design
Page 289 and 290:
Fairmont Hotels & Resorts · Design
Page 291 and 292:
Page 293 and 294:
Page 295:
show all

FAIRMONT HOTELS &amp; RESORTS -DESIGN STANDARDS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

FAIRMONT HOTELS & RESORTS -DESIGN STANDARDS