09.06.2017 Views

FAIRMONT HOTELS & RESORTS -DESIGN STANDARDS

Hotel Design

Hotel Design

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Fairmont Hotels & Resorts · Design Standards<br />

SERVICES AND SYSTEMS<br />

Manufacturer (continued)<br />

The manufacturer, in conjunction with the vendor, is to be responsible for providing<br />

the product warranty and the lifetime application performance assurance for the<br />

cabling system.<br />

All cabling, termination hardware, and cordage shall be sourced from a single manufacturer to<br />

ensure the product quality necessary for end-to-end system performance and to obtain the<br />

product warranty and lifetime application performance assurance for the manufacturers cabling<br />

system.<br />

Vendor<br />

The bidder, including any subcontractor, shall show proven expertise in the implementation of<br />

cabling projects. This expertise can be illustrated through the inclusion of details of at least<br />

three projects involving the design and installation of enhanced Category 5 unshielded twistedpair<br />

(hereafter referred to as UTP) and optical fiber cabling systems within the past two year<br />

period. Names, addresses and telephone numbers of references for the three projects shall be<br />

included.<br />

The successful bidder shall hereafter be referred to as the Vendor.<br />

The Vendor shall accept complete responsibility for the design, installation, acceptance testing<br />

and certification of the manufactures copper optical fiber cabling system.<br />

The Vendor shall provide proof of current manufacturer certification status, and shall deliver<br />

certification of the installed manufactures cabling system to the Purchaser.<br />

Installer<br />

Either employees of the Vendor or subcontractors shall perform the installation of the<br />

manufactures copper and optical fiber cabling system. Organizations assigned as subcontractors<br />

shall be required to provide proof of manufactures authorization to install copper and optical<br />

fiber cabling.<br />

All work shall be performed and supervised by technicians and managers qualified to install<br />

and test the manufactures optical fiber cabling system in accordance with the manufacturers<br />

requirements.<br />

In the event that subcontractors are used for any portion of the installation or acceptance<br />

testing, the Vendor shall be responsible for any subsequent corrective action required on that<br />

portion.<br />

REV. MARCH 2006 229<br />

© 2002, Fairmont Hotels and Resorts. All Rights Reserved.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!