FAIRMONT HOTELS & RESORTS -DESIGN STANDARDS

Fairmont Hotels & Resorts · Design Standards
SERVICES AND SYSTEMS
Electrical/General Requirements (continued)
a) Public restrooms
b) Each ballroom and pre-function section
c) Meeting rooms
d) Spa/Fitness Center
f) Flood, sump and sewage pumps
g) Automatic transfer equipment to bring all elevators to main lobby level,
each one at a time, while at the same time keeping the fireman’s elevator
continually operational
h) Telephone systems
i) Freezers, refrigerators and circulation pumps for refrigeration cooling
j) All computer equipment and computer room HVAC equipment
k) Fire protection and life safety
l) HVAC equipment used for smoke control, stairwell and elevator shaft
pressurization
m) Uninterrupted power supply
n) Oil heaters for chillers
o) All paging systems
p) Security systems including CCTV
q) Automatic door.
The main distribution system using at least two transformers, secondary and/or primary
tie or transfer switches, standby cable or equivalent, is to be designed and specified to
prevent total loss of power in the event of maintenance or a failure of any single piece
of equipment, bus or cable in the primary and main secondary distribution.
An automatic load limiting system is to be designed and specified to shut down the
following loads when the loads exceeds the predetermined limit:
a) Toilet exhaust fans
b) Miscellaneous general ventilation systems
c) Public space air-conditioning systems (provide over-ride)
d) Chillers (only as a last resort)
e) Electric water heating.
Panel boards are to be designed and specified to meet the following general criteria:
REV. MARCH 2006 202
© 2002, Fairmont Hotels and Resorts. All Rights Reserved.