FAIRMONT HOTELS & RESORTS -DESIGN STANDARDS

FAIRMONT HOTELS & RESORTS · DESIGN STANDARDS
BACK-OF-HOUSE
1.11. Paint Shop
Each maintenance area shall include a separate paint shop with separate exhaust system.
In addition, the shop will have a 10’0” (3 m) long hardwood work bench (see Fairmont
Hotels and Resorts Standard Details) and deep stainless steel double bowled sink on
floor mounted frame with wall mounted tap set with swivel spout.
1.12. Carpentry Shop
Each maintenance area shall include a carpentry shop with special, local filters on the
return air system. In addition, the shop will have a hardwood work bench (see Fairmont
Hotels & Resorts Standard Details) and include the following features:
a) One 208V x 30amp single phase outlet at 7’6” (2.3 m) on centre
line AFFL
b) Three 110V x 15amp outlets at 4’0” (1.2 m) on centre line AFFL
c) Three 110V x 15amp outlets at 1’0” (0.3 m) on centre line AFFL
d) One 110V x 15amp-outlet flush mounted in floor in centre of
room (circular saw outlet).
REV. MARCH 2006 154
© 2002, Fairmont Hotels and Resorts. All Rights Reserved.