FAIRMONT HOTELS & RESORTS -DESIGN STANDARDS

FAIRMONT HOTELS & RESORTS · DESIGN STANDARDS
BACK-OF-HOUSE
Maintenance Area (continued)
a) In addition to what is indicated below, the following number of
single phase electrical outlets, each mounted at 4’0” (1.2 m) on
centre line AFFL and on a separate circuit will be provided
throughout the maintenance areas:
i) Five 110V x 15amp duplex
ii) Two 110V x 30amp
iii) Three 220V x 15amp
iv) One 220V x 50amp
v) One TV antenna outlet and two 110V x 15amp duplex outlet
mounted at 4’0” (1.2 m) on centre line AFFL (TV repair
desk)
vi) Wall mounted telephones
vii) TV antenna outlet and duplex electrical outlet, both
mounted at 4’6” (1.4 m) on centre line AFFL (secured
storage room).
b) Work bench system along full length of two walls, consisting of
the following:
i) Hardwood work top 2’6” (0.8 m) wide, at a height of 3’0”
(0.9 m) AFFL with lockable drawers under (see Fairmont
Hotels & Resorts Standard Details)
ii) Hardwood and metal work top 2’6” (0.8 m) wide, at a height
of 3’0” (0.9 m) AFFL with lockable drawers and doors
under (see Fairmont Hotels & Resorts Standard Details)
iii) TV work bench with mirror above (see Fairmont Hotels &
Resorts Standard Details).
c) Shift engineer requires the following features:
i) Electrical outlets
ii) Computer systems outlets
iii) Remote terminal for BMS (Building Management System)
iv) Plan table and plan hanging rack.
REV. MARCH 2006 153
© 2002, Fairmont Hotels and Resorts. All Rights Reserved.