FAIRMONT HOTELS & RESORTS -DESIGN STANDARDS

FAIRMONT HOTELS & RESORTS · DESIGN STANDARDS
BACK-OF-HOUSE
1.4. Outline of Finishes and Materials
The following schedule of finishes has been prepared to establish a standard of finish
for the major types of hotel areas. Its purpose is to direct the Consultants in their design
and in the preparation of their own detailed room finish schedule
Legend
AT-CG
AT-EG
AT-M
CP
CT
G
ES
LH
M
MONO
QT
RB
RCB
SGP
SP
VT
VWC
WD
CPT
12” x 12" (30 x 30 cm) textured ceiling tiles with concealed grid
4' 0" x 2' 0" (1.2 x 0.6 m) lay in textured ceiling tiles with exposed grid.
Tiles and grid finished white
An acoustic tile ceiling that will resist heat, steam, water etc. and is
easily cleaned e.g. metal tile with acoustic pad
Carpet
Ceramic tile, thin set. Joint between CT and bathtubs and WC’s shall be
caulked with white, silicone caulking specially designed for this purpose
Granite laid to special pattern
Exposed structure including all exposed services
Smooth trowelled concrete with liquid hardener and dustproofer
Marble laid to special pattern
Monolithic floor finish e.g. Duron Resolast
Slip resistant quarry tile
2 ½" (6.4 cm) flat rubber or vinyl covered (use cheaper)
2 ½" (6.4 cm) rubber or vinyl-coved base (use cheaper)
Three coats semi-gloss enamel paint
Smooth plaster with two coats flat latex paint
12" x 12" (30 x 30 cm) vinyl tile
Vinyl wall covering
Stained or painted hardwood
Carpet tiles
REV. MARCH 2006 141
© 2002, Fairmont Hotels and Resorts. All Rights Reserved.