FAIRMONT HOTELS & RESORTS -DESIGN STANDARDS

FAIRMONT HOTELS & RESORTS · DESIGN STANDARDS
CONSTRUCTION REQUIREMENTS
3.3. Procedures
The Hotel’s Director of Engineering, the Fairmont Design and Construction Manager,
and the FF&E Coordinator will all participate in the initial snagging of a representative
sample of guestrooms along with the owner’s representatives, the architect, consultants
and the general contractor. The purpose of this joint effort is to establish a standard for
both the contractor and the owner’s representatives who will perform the majority of
the snagging.
It is the intention of this program that Fairmont Hotels & Resorts participate in the
initial snagging of about 5% of the guestrooms.
The tools required for snagging are:
• Small torpedo level
• Electric socket tester
• Tape measure
• Snag checklist
• Model room manual
The room will be reviewed from two perspectives.
1. Architecturally
Doors and Hardware
Window millwork
Finishes, fixtures and accessories
2. Mechanical, Electric and Plumbing
HVAC
Plumbing fittings and fixtures
Lighting and power
All punch list items are to be detailed in written format according to the above
categories. Each item is to be numbered and the deficiency clearly identified using
reference to the model room manual as necessary.
Attached is a sample punch list, which can serve as a model.
REV. MARCH 2006 - 8 -
© 2002, Fairmont Hotels and Resorts. All Rights Reserved.