TEC Ma-1535 owners manual - 4S Business Systems Inc.

More documents

Recommendations

Info

Safety Summary EO1-11149 �� &$87,21 If foreign objects (metal fragments, water, liquids) enter the machines, first turn off the power switches and disconnect the power cord plugs from the outlet, and then contact your authorized TOSHIBA TEC representative for assistance. Continued use of the machine in that condition may cause fire or electric shock. Ensure that the equipment is properly grounded. Extension cables should also be grounded. Fire or electric shock could occur on improperly grounded equipment. (ii) When unplugging the power cords, be sure to hold and pull on the plug portion. Pulling on the cord portion may cut or expose the internal wires and cause fire or electric shock. Do not remove covers, repair or modify the machine by yourself. You may be injured by high voltage, very hot parts or sharp edges inside the machine. Unauthorized modification is prohibited. This indicates that there is the risk of personal Injury or damage to objects if the machines are improperly handled contrary to this indication. �� The following precautions will help to ensure that this machine will continue to function correctly. ● Try to avoid locations that have the following adverse conditions: * Temperatures out of the specification * Direct sunlight * High humidity * Shared power source * Excessive vibration * Dust/Gas ● Do not subject the machine to sudden shocks. ● Do not press the keys too hard. Keys will operate correctly if they are touched lightly. ● Clean the cover and keyboard, etc. by wiping with a dry cloth or a cloth soaked with detergent and wrung out thoroughly. Never use thinner or other volatile solvent for cleaning. ● At the end of the day, turn the power OFF, then clean and inspect the exterior of the machine. ● Try to avoid using this equipment on the same power supply as high voltage equipment or equipment likely to cause mains interference. ● USE ONLY TOSHIBA TEC SPECIFIED consumables. ● DO NOT STORE the consumables where they might be exposed to direct sunlight, high temperatures, high humidity, dust, or gas. ● When moving the machine, take hold of the drawer and lift the machine. ● Do not place heavy objects on top of the machines, as these items may become unbalanced and fall causing injury. ● Do not block the ventilation slits of the machines, as this will cause heat to build up inside the machines and may cause fire. ● Do not lean against the machine. It may fall on you and could cause injury. ● Place the machine on a stable and level surface. �� ● Utilize our maintenance services. After purchasing the machine, contact your authorized TOSHIBA TEC representative for assistance once a year to have the inside of the machine cleaned. Otherwise, dust will build up inside the machines and may cause a fire or a malfunction. Cleaning is particularly effective before humid rainy seasons. ● Our preventive maintenance service performs the periodic checks and other work required to maintain the quality and performance of the machines, preventing accidents beforehand. For details, please consult your authorized TOSHIBA TEC representative for assistance. ● Using insecticides and other chemicals Do not expose the machines to insecticides or other volatile solvents. This will cause the cabinet or other parts to deteriorate or cause the paint to peel.
1. OPERATOR’S GUIDE
Page 1 and 2: TEC Electronic Cash Register MA-153
Page 3: Safety Summary EO1-11149 6DIHW\ 6XP
Page 7 and 8: EO1-11149 MA-1535-2 SERIES Page 9.1
Page 9 and 10: 3. APPEARANCE AND NOMENCLATURE EO1-
Page 11 and 12: 5. DISPLAY EO1-11149 5. DISPLAY 5-
Page 13 and 14: 5. DISPLAY EO1-11149 5.2 Lower Row
Page 15 and 16: 6. KEYBOARD EO1-11149 R/A Key Funct
Page 17 and 18: 6. KEYBOARD EO1-11149 Key Functions
Page 19 and 20: 7. CASHIER SIGNING OPERATIONS EO1-1
Page 25 and 26: 8. INSTALLING AND REPLACING THE REC
Page 27 and 28: 9. REGISTERING PROCEDURE AND PRINT
Page 55 and 56:
9. REGISTERING PROCEDURE AND PRINT
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
10. ECR PRINTER MOTOR LOCK DETECTOR
Page 71 and 72:
12. GENERAL MAINTENANCE EO1-11149 1
Page 73 and 74:
13. SPECIFICATIONS EO1-11149 13. SP
Page 75 and 76:
TABLE OF CONTENTS EO1-11149 MA-1535
Page 77 and 78:
1. DAILLY OPERATION FLOW EO1-11149
Page 79 and 80:
2. OPERATIONS IN [−] MODE EO1-111
Page 81 and 82:
2. OPERATIONS IN [−] MODE EO1-111
Page 83 and 84:
3. READ (X) AND RESET (Z) REPORTS E
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
4. PROGRAMMING OPERATIONS EO1-11149
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
5. PROGRAMMED DATA VERIFICATION EO1
Page 147 and 148:
5. PROGRAMMED DATA VERIFICATION EO1
Page 149:
E PRINTED IN MALAYSIA EO1-11149C
show all

TEC Ma-1535 owners manual - 4S Business Systems Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?