Timken Industrial Seal Catalog

More documents

Recommendations

Info

20 • Meets NEMA MG 1-2003 • Bronze or 316 • Meets IEEE 841-2001 test standards stainless steel • Conforms to API 610 construction • No arbor press required for • Filled PTFE installation unitizing ring • No internal metal-to-metal contact • Fluoroelastomer • Small O.D. of flange does not interfere with equipment • Meets NEMA MG 1-2003 • Bronze or 316 • Meets IEEE 841-2001 test standards stainless steel • Conforms to API 610 construction • No arbor press required for • Filled PTFE installation unitizing ring • No internal metal-to-metal contact • Fluoroelastomer • Fits in c/s as small as 0.188" O-rings standard (4.76mm) • Short flange width does not interfere with equipment • Meets NEMA MG 1-2003 • Bronze or 316 • Meets IEEE 841-2001 test standards stainless steel • No arbor press required for construction installation • Filled PTFE • No internal metal-to-metal contact unitizing ring • Flangeless design fits in spaces • Fluoroelastomer as narrow as 0.375" (9.53mm) O-rings standard • Meets NEMA MG 1-2003 • Bronze or 316 • Meets IEEE 841-2001 test standards stainless steel con- • Conforms to API 610 struction • No arbor press required for • Filled PTFE unitiz- installation ing ring • No internal metal-to-metal contact • Fluoroelastomer • Does not extend past face of O-rings standard housing • Meets NEMA MG 1-2003 • Bronze or 316 • Meets IEEE 841-2001 test standards stainless steel • Conforms to API 610 construction • No arbor press required for • Filled PTFE installation unitizing ring • No internal metal-to-metal contact • Fluoroelastomer • Standard and custom design for O-rings standard split pillow blocks • Meets NEMA MG 1-2003 • Bronze or 316 • Surpasses IEEE 841-2001 test stainless steel standards construction • Conforms to API 610 • Filled PTFE • No arbor press required for unitizing ring installation • Fluoroelastomer • No internal metal-to-metal contact O-rings standard • Custom designed for individual step shaft applications • Meets NEMA MG 1-2003 • Bronze or 316 • Surpasses IEEE 841-2001 test stainless steel standards construction • Conforms to API 610 • Filled PTFE • No arbor press required for unitizing ring installation • Fluoroelastomer • No internal metal-to-metal contact O-rings standard • Fits in c/s as small as 0.188 in. (4.76mm) • Vertical design for top applications only Product Information Bearing Isolators Metallic Shaft Surface Axial Misalign. Isolator Features Materials Temperature Diameter Speed Motion & Runout Pressure Model Number in. (mm) in. (mm) in. @ f/m (mm@m/s) Standard, Small Flanged Small Cross Section, Short Flange Flangeless Narrow Width Flangeless Split Pillow Block Step Shaft Vertical, Small Cross Section -30°F (-34°C) to 0.875 to 12,000 f/m ±0.025 ±0.020 Ambient 400°F (204°C) 10.500 (60.9 m/s) (0.64) (0.51) (22.2 to 266.7) -30°F (-34°C) to 0.875 to 12,000 f/m ±0.015 ±0.010 Ambient 400°F (204°C) 5.500 (60.9 m/s) (0.38) (0.25) (22.2 to 139.7) -30°F (-34°C) to 0.875 to 12,000 f/m ±0.015 ±0.010 Ambient 400°F (204°C) 5.500 (60.9 m/s) (0.38) (0.25) (22.2 to 139.7) -30°F (-34°C) to 0.875 to 12,000 f/m ±0.025 ±0.020 Ambient 400°F (204°C) 10.500 (60.9 m/s) (0.64) (0.51) (22.2 to 266.7) -30°F (-34°C) to 0.875 to 12,000 f/m ±0.025 ±0.020 Ambient 400°F (204°C) 10.500 (60.9 m/s) (0.64) (0.51) (22.2 to 266.7) -30°F (-34°C) to 0.875 to 12,000 f/m ±0.025 ±0.020 Ambient 400°F (204°C) 10.500 (60.9 m/s) (0.64) (0.51) (22.2 to 266.7) -30°F (-34°C) to 0.875 to 12,000 f/m ±0.025 ±0.020 Ambient 400°F (204°C) 10.500 (60.9 m/s) (0.64) (0.51) (22.2 to 266.7)
Bearing Isolators Product Information Metallic Shaft Surface Axial Misalign. Isolator Features Materials Temperature Diameter Speed Motion & Runout Pressure (Microcellular Filter) in. (mm) in. (mm) in. @ f/m (mm@m/s) Standard Flangeless Flangeless Split Pillow Block • Unique microcellular technology • Bronze or 316 • Protects against severely dusty stainless steel environments construction • Meets NEMA MG 1-2003 • Silcone foam • Surpasses IEEE 841-2001 test • Filled PTFE standards unitizing ring • Conforms to API 610 • Fluoroelastomer • No arbor press required for O-ring standard installation • No internal metal-to-metal contact • Unique microcellular technology • Bronze • Protects against severely dusty construction environments • Silcone foam • Meets NEMA MG 1-2003 • Filled PTFE • Meets IEEE 841-2001 test standards unitizing ring • Conforms to API 610 • Fluoroelastomer • No arbor press required for O-rings standard installation • No internal metal-to-metal contact • Does not extend past face housing • Filled PTFE construction • FDA compliant • Excellent chemical resistance blue glass filled • Meets NEMA MG 1-2003 PTFE • Meets IEEE 841-2001 test standards • Fluoroelastomer • No arbor press required for O-rings standard installation • Filled PTFE construction • FDA compliant • Excellent chemical resistance blue glass filled • Meets NEMA MG 1-2003 PTFE • Meets IEEE 841-2001 test standards • Fluoroelastomer • No arbor press required for O-rings standard installation • Fits in c/s as small as 0.188" (4.76mm) • Filled PTFE construction • FDA compliant • Excellent chemical resistance blue glass filled • Meets NEMA MG 1-2003 PTFE • Meets IEEE 841-2001 test standards • Fluoroelastomer • No arbor press required for O-rings standard installation • Does not extend past face of housing • Filled PTFE construction • FDA compliant • Excellent chemical resistance blue glass filled • Meets NEMA MG 1-2003 PTFE • Meets IEEE 841-2001 test standards • Fluoroelastomer • No arbor press required for O-rings standard installation • Relief in seal allows regreasing with no disassembly of equipment • Filled PTFE construction • FDA compliant • Excellent chemical resistance blue glass filled • Meets NEMA MG 1-2003 PTFE • Meets IEEE 841-2001 test standards • Fluoroelastomer • No arbor press required for O-rings standard installation • Standard and custom design for split pillow blocks -30°F (-34°C) to 0.875 to 4,500 f/m ±0.025 ±0.020 Ambient 400°F (204°C) 10.500 (22.9 m/s) (0.64) (0.51) (22.2 to 266.7) -30°F (-34°C) to 0.875 to 4,500 f/m ±0.025 ±0.020 Ambient 400°F (204°C) 10.500 (22.9 m/s) (0.38) (0.51) (22.2 to 266.7) Non-Metallic Shaft Surface Axial Misalign. Isolator Features Materials Temperature Diameter Speed Motion & Runout Pressure (Glass-Filled PTFE) in. (mm) in. (mm) in. @ f/m (mm@m/s) Standard Small C/S Grease Purgeable -40°F (-40°C) to 0.875 to 4,500 f/m ±0.015 ±0.020 Ambient 400°F (204°C) 11.000 (22.9 m/s) (0.38) (0.51) (22.2 to 279.4) -40°F (-40°C) to 0.875 to 4,500 f/m ±0.015 ±0.020 Ambient 400°F (204°C) 11.000 (22.9 m/s) (0.38) (0.51) (22.2 to 279.4) -40°F (-40°C) to 0.875 to 4,500 f/m ±0.015 ±0.020 Ambient 400°F (204°C) 11.000 (22.9 m/s) (0.38) (0.51) (22.2 to 279.4) -40°F (-40°C) to 0.875 to 4,500 f/m ±0.015 ±0.020 5 psi 400°F (204°C) 10.875 (22.9 m/s) (0.38) (0.51) (22.2 to 276.2) -40°F (-34°C) to 0.875 to 4,500 f/m ±0.015 ±0.020 Ambient 400°F (204°C) 11.000 (22.9 m/s) (0.38) (0.51) (22.2 to 279.4) 21
Page 1: Timken Industrial Seal Catalog High
Page 4 and 5: Introduction At Timken, customers t
Page 7 and 8: Technology Overview Turn to Timken
Page 9 and 10: Engineering Data Comparing Shaft Le
Page 11 and 12: Engineering Data Table 7: Shaft and
Page 13 and 14: Seals Installation Instructions Ins
Page 15 and 16: Seal & Material Selection Seal Sele
Page 17 and 18: Oil Seals Product Information Large
Page 19 and 20: Oil Seals Product Information Large
Page 21 and 22: Oil Seals Product Information Shaft
Page 23 and 24: Oil Seals Product Information Speci
Page 25: Bearing Isolators Configurations Bo
Page 29 and 30: Glossary Width Assembled Seal made
Page 31 and 32: Oil Seals Appendix A - Product Iden
Page 37 and 38: Oil Seals Appendix B - Obsolete App
Page 39 and 40: Oil Seals Appendix C - Compound Com
Page 45 and 46: Oil Seals Appendix D - Failure Anal
Page 47 and 48: Oil Seals Appendix D - Failure Anal
Page 49: Relationship Between RPM, FPM and S
Page 52 and 53: M-2
Page 54 and 55: Oil Seals by Model Number Model Num
Page 56 and 57: Product Inches MM Model Code ID OD
Page 76 and 77:
Product Inches MM Model Code ID OD
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Product Inches MM Model Code From I
Page 219 and 220:
Seals by Shaft size
Page 221 and 222:
Using This Catalog The following pa
Page 223 and 224:
Oil Seals by Model Number Product I
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Face Seals by Model Number Product
Page 387 and 388:
Oil Seals by Model Number
show all

Timken Industrial Seal Catalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?