Timken Industrial Seal Catalog

More documents

Recommendations

Info

* Most designs available without spring. * Most designs available in silicone and other materials. 16 • General purpose external seal • Solid design • Reverse bevel lip design prevents lip rollover • Reinforced rubber OD • Heavy-duty metal outer case • Low speed service • Assembled design • Heavy-duty metal outer case • Assembled design • Heavy-duty metal outer case • Assembled design • General purpose assembled seal for high pressure applications • Gylon ® element offers excellent chemical resistance • Dry running up to 700 fpm (3.5 m/s) • General purpose assembled seal for high pressure applications • Gylon ® element offers excellent chemical resistance • Dry running up to 700 fpm (3.5 m/s) • General purpose assembled seal for high pressure applications • Gylon ® element offers excellent chemical resistance • Dry running up to 700 fpm (3.5 m/s) • General purpose assembled seal for high pressure applications • Gylon ® element offers excellent chemical resistance • Dry running up to 700 fpm (3.5 m/s) • Timken N • Timken ES • Timken V • Timken N • Timken ES • Timken V • Timken N • Timken ES • Timken V • Timken N • Timken ES • Timken V • Gylon ® • FDA Gylon ® • Gylon ® • FDA Gylon ® • Gylon ® • FDA Gylon ® • Gylon ® • FDA Gylon ® Product Information Oil Seals Excluder Shaft Surface Spring Misalign. Features Materials Temperature Seals Diameter Speed Type in. @ f/m Pressure in. (mm) (mm@m/s) Model 26E Model 111 Model 113 Model 123 -40°F (-40°C) to 1.000 to 5,000 f/m Stainless 0.015 @ 1,000 To 7 psi 200°F (93°C) 60.000 (25.4 m/s) (0.38 @ 5.10) (0.4 bar) -40°F (-40°C) to (25.4 to 0.010 @ 2,000 300°F (150°C) 1524.0) (0.25 @ 10.20) -22°F (-30°C) to 0.008 @ 5,000 400°F (204°C) (0.20 @ 25.40) -40°F (-40°C) to 3.000 to 1,000 f/m Stainless 0.010 @ 500 To 7 psi 200°F (93°C) 50.000 (5.1 m/s) steel finger (0.25 @ 2.50) (0.4 bar) -40°F (-40°C) to (76.2 to 0.005 @ 1,000 300°F (150°C) 1270) (0.13 @ 5.10) -22°F (-30°C) to 400°F (204°C) -40°F (-40°C) to 3.000 to 3,000 f/m Stainless 0.020 @ 1,000 To 7 psi 200°F (93°C) 50.000 (15.2 m/s) steel finger (0.50 @ 5.10) (0.4 bar) -40°F (-40°C) to (76.2 to 0.010 @ 2,000 300°F (150°C) 1270)* (0.25 @ 10.20) -22°F (-30°C) to 0.005 @ 3,000 400°F (204°C) (0.13 @ 15.20) -40°F (-40°C) to 1.156 to 3,000 f/m Stainless 0.020 @ 1,000 To 7 psi 200°F (93°C) 50.000 (15.2 m/s) steel finger (0.50 @ 5.10) (0.4 bar) -40°F (-40°C) to (29.4 to 0.010 @ 2,000 300°F (150°C) 1270) (0.25 @ 10.20) -22°F (-30°C) to 0.005 @ 3,000 400°F (204°C) (0.13 @ 15.20) Specialty Shaft Surface Spring Misalign. Features Materials Temperature Seals Diameter Speed Type in. @ f/m Pressure in. (mm) (mm@m/s) P/S ® Single Lip P/S ® Single Lip Reverse P/S ® Dual Opposed P/S ® Dual Tandem -40°F (-40°C) to 0.438 to 2,000 f/m N/A 0.005 @ 2,000 150 psi 200°F (93°C) 20.000 (10.2 m/s) (0.13 @ 10.20) (10 bar) -40°F (-40°C) to (11.1 to 300°F (150°C) 508.0) max -22°F (-30°C) to seal O.D. 400°F (204°C) -40°F (-40°C) to 0.438 to 2,000 f/m N/A 0.005 @ 2,000 150 psi 200°F (93°C) 20.000 (10.2 m/s) (0.13 @ 10.20) (10 bar) -40°F (-40°C) to (11.1 to 300°F (150°C) 508.0) max -22°F (-30°C) to seal O.D. 400°F (204°C) -40°F (-40°C) to 0.438 to 2,000 f/m N/A 0.005 @ 2,000 150 psi 200°F (93°C) 20.000 (10.2 m/s) (0.13 @ 10.20) (10 bar) -40°F (-40°C) to (11.1 to 300°F (150°C) 508.0) max -22°F (-30°C) to seal O.D. 400°F (204°C) -40°F (-40°C) to 0.438 to 2,000 f/m N/A 0.005 @ 2,000 150 psi 200°F (93°C) 20.000 (10.2 m/s) (0.13 @ 10.20) (10 bar) -40°F (-40°C) to (11.1 to 300°F (150°C) 508.0) max -22°F (-30°C) to seal O.D. 400°F (204°C)
Oil Seals Product Information Specialty Shaft Surface Spring Misalign. Features Materials Temperature Seals Diameter Speed Type in. @ f/m Pressure in. (mm) (mm@m/s) Model 26HR Model 50 Model 54 Model 57 Model 58 Model 62 • General purpose seal for high misalignment applications • Low-speed service • Increased misalignment capability over standard 26 • General purpose seal • Low-speed service • Moderate pressure • High-temp, general purpose assembled seal • Stainless steel outer case • THERMO-CERAM sealing element • Ideal for abrasive environments • Grease lubricated apps only • Assembled seal • Solid design • Low-speed service • Excellent chemical resistance • Timken N • Timken ES • Timken V • Timken N • Special purpose assembled seal • Timken N • Excluder seal • Designed for spherical bearing applications • General purpose seal • Timken N • Metal reinforced rubber O.D. • Reverse bevel lip design • Timken ES prevents lip rollover • Available in single & dual lip • Timken V • Ideal for slow-speed service applications (continuous casters) * Most designs available without spring. * Most designs available in silicone and other materials. • THERMO-CERAM • PTFE -40°F (-40°C) to 1.000 to 1,000 f/m Molded-in Applicatioon To 7 psi 200°F (93°C) 5.000 (5.1 m/s) carbon dependent (0.4 bar) -40°F (-40°C) to (25.4 to steel garter 300°F (150°C) 1270.0) -22°F (-30°C) to 400°F (204°C) -40°F (-40°C) to 5.000 to 1,000 f/m Molded-in 0.010 To 35 psi 200°F (93°C) 12.000 (5.1 m/s) carbon (0.25) (2.4 bar) (127.0 to steel garter 304.8) -40°F (-40°C) to For 1,000 f/m Stainless N/A To 50 psi 200°F (93°C) spherical (5.1 m/s) steel finger (3.4 bar) radii from 2.375 to 8.000 (60.33 to 203.2) -40°F (-40°C) to 2.000 to 500 f/m Molded-in 0.015 @ 500 To 7 psi 200°F (93°C) 12.000 (2.5 m/s) carbon (0.38 @ 2.50) (0.4 bar) -40°F (-40°C) to (50.8 to steel garter 300°F (150°C) 304.8) -22°F (-30°C) to 400°F (204°C) To 1600°F 2.000 to 500 f/m N/A 0.015 @ 500 Ambient (871°C) 12.000 (2.5 m/s) (0.38 @ 2.50) (50.8 to 304.8) -120°F (-85°C) to 0.437 to 2,000 f/m Carbon 0.005 @ 2,000 To 7 psi 400°F (205°C) 20.000 (10.2 m/s) steel garter (0.13 @ 10.20) (0.4 bar) (11.1 to 508.0) in max O.D. seal 17
Page 1: Timken Industrial Seal Catalog High
Page 4 and 5: Introduction At Timken, customers t
Page 7 and 8: Technology Overview Turn to Timken
Page 9 and 10: Engineering Data Comparing Shaft Le
Page 11 and 12: Engineering Data Table 7: Shaft and
Page 13 and 14: Seals Installation Instructions Ins
Page 15 and 16: Seal & Material Selection Seal Sele
Page 17 and 18: Oil Seals Product Information Large
Page 19 and 20: Oil Seals Product Information Large
Page 21: Oil Seals Product Information Shaft
Page 25 and 26: Bearing Isolators Configurations Bo
Page 27 and 28: Bearing Isolators Product Informati
Page 29 and 30: Glossary Width Assembled Seal made
Page 31 and 32: Oil Seals Appendix A - Product Iden
Page 37 and 38: Oil Seals Appendix B - Obsolete App
Page 39 and 40: Oil Seals Appendix C - Compound Com
Page 45 and 46: Oil Seals Appendix D - Failure Anal
Page 47 and 48: Oil Seals Appendix D - Failure Anal
Page 49: Relationship Between RPM, FPM and S
Page 52 and 53: M-2
Page 54 and 55: Oil Seals by Model Number Model Num
Page 56 and 57: Product Inches MM Model Code ID OD
Page 72 and 73:
Product Inches MM Model Code ID OD
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Product Inches MM Model Code From I
Page 219 and 220:
Seals by Shaft size
Page 221 and 222:
Using This Catalog The following pa
Page 223 and 224:
Oil Seals by Model Number Product I
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Face Seals by Model Number Product
Page 387 and 388:
Oil Seals by Model Number
show all

Timken Industrial Seal Catalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?