Ball Bearings Catalog - Timken

TIMKEN ® SAFETY END CAPS MAKE WORKPLACE PROTECTION A SNAP
Easy-to-install Timken Safety End Caps protect exposed rotating shafts, reducing hazards
around many types of equipment. The patent-pending design meets all applicable OSHA
requirements.
The Timken safety product line consists of a mounting ring and snap-on cover, both molded
in durable, bright yellow polymer. The end cap snaps into the adhesive-backed ring that adheres
to the outboard face of most flanged bearing housings. The secure 360 degree fit makes for
a rugged unit that also provides basic protection and washdown.
Factory retrofits are a snap with everything provided in a handy kit. The cost-effective end
covers are simple to install on Timken and most other flanged units. Current sizes range from
3 ⁄4 in. to 1 15 /16 in. (20 mm to 50 mm) shaft sizes for two or four-bolt flanged cast iron, malleable
iron, and other selected housing styles and sizes.
KIT CONTENTS
Timken safety end caps come in a convenient kit that
contains everything required for a safe and durable mounting:
• Polymer end cap
• Adhesive-backed polymer mounting ring
• Scuffing pad
• Cleaning cloth
INSTALLATION
Steps in the simple mounting procedure include:
1. Use the scuffing pad on housing’s mating surface
where the mounting ring will be placed.
2. Clean off mounting area.
3. Attach adhesive-backed mounting ring.
4. Hold mounting ring in place with pressure for
60 seconds.
5. Allow adhesive to set for minimum of one hour.
6. Snap end cap into place.
TIMKEN BALL BEARING PILLOW BLOCK GREASE
Timken Ball Bearing Pillow Block grease is a NLGI No. 2 polyureathickened
grease. It provides outstanding long-life, moderately
high-temperature lubrication to ball bearings. This grease maintains
its mechanical shear stability and provides corrosion resistance,
even in the presence of salt water. Timken Ball Bearing Pillow Grease
features low-noise characteristics and excellent pumpability. This
grease does not contain extreme-pressure additives but is inhibited
against rust and oxidation. Operating temperatures range from
-40° F to 400° F (-40° C to 163° C). This grease is typically used in
lightly loaded ball bearings in pillow blocks and conveyors that
operate in high-temperature environments, including kiln and
glasswork applications, electric motors, chemical manufacturing
and noise-sensitive environments.
ORDERING INFORMATION
Kit * Shaft Sizes
204 ECY Kit
3 /4, 20 mm
205 ECY KIT 7 /8, 15 /16, 1, 25 mm
206 ECY KIT 1 1 /16, 1 1 /8,1 3 /16, 1 1 /4 S, 30 mm
207 ECY KIT 1 1 /4, 1 5 /16, 1 3 /8, 1 7 /16, 35 mm
208 ECY KIT 1 1 /2, 40 mm
Safety end caps protect against
rotating stub shafts.
209 ECY KIT 1 5 /8, 1 11 /16, 1 3 /4, 45 mm
210 ECY KIT 1 15 /16, 2 S, 50 mm
* Kits are designed to fit the following housed units -
4-Bolt: YCJ, RCJ, RCJC, TCJ, LCJ, SCJ, VCJ
2-Bolt: YCJT, RCJT, RCJTC, TCJT, LCJT, SCJT, VCJT
Housed Units
SINGLE-POINT AND CENTRALIZED
MULTI-POINT LUBRICATORS
Proper lubrication is critical to bearing and machine
performance. To help prevent damage, Timken G-Power
and M-Power single-point lubricators deliver periodic
grease to bearings, chains, guideways and other
industrial equipment components. You can choose
from gas-powered or electromechanical varieties to
meet your operating specifications. C-Power multipoint
lubricators are a centralized lubrication system
capable of delivering grease to up to six lubrication
points. Oil is not an option for this unit.
G-Power and M-Power and
C-Power canisters can be filled
with Timken-formulated lubricants
or many other types of commercial
lubricants. A full line of accessories –
including brackets, clamps, brushes,
fittings and hose extensions – ease
installation and offer a host of
mounting options for hard-to-reach
locations.
TIMKEN PRODUCTS CATALOG D141
•
AD
A