Mapping 250K/500K SNP assay

174 GeneChip ® Mapping 500K Assay Manual
MEANING OF ERROR MESSAGES
The following lists some of the common error messages and what they
mean (Table 6.4).
Table 6.4
Common Error Messages
Error Message Meaning
“Invalid Command” The script contains a command that can
not be executed because its command
code is either undefined or has a format
error.
“Improper Script” The first command of the script is not the
required FS450 command.
“Temperature Timeout” The Re-attempt command timed out
before the set point temperature was
reached.
“Sensor Timeout” The Await Sensors command timed out
before the anticipated sensor pattern
was seen.
“Valve not Homed” The Home command did not result in the
valve reaching its HOME position.
“Valve Motion Error” The Valve command did not result in the
valve reaching its target valve position.
“Valve out of Position” According to the outer valve encoder,
the valve did not reach a valid position
when it was last rotated.
“Error while Filling” While filling the cartridge, the
AwaitMotor command terminated
because of the step count not the
expected sensor pattern, and that the
same error had occurred several times
consecutively.
“Error while Draining” While draining the cartridge, the
AwaitMotor command terminated
because the step count was not the
expected sensor pattern, and the same
error had occurred several times
consecutively.