LA 180 L - Stabila

With this digital receiver you
can read off the millimetre
reference deviation directly in
figures from the display. Long
range: 8 cm high receiving
area. Probably the fastest and
most precise correction of
heights provided by digital
measuring techniques designed
for the construction site.
The REC 300 Digital
Receiver can be used with
most commercially available
rotation lasers. Ordering
information on page 38.
The advantages of the new REC 300 Digital Receiver
Vial
Acoustic signal
exit point
Easily readable
digital display
Graduated distance
symbols
Operating temperature
–20°C – +60°C
On/off
Accuracy level
selection
Digital display (in mm)
of the divergence from
the reference point
Accuracy level
display
Marking line
100 mm high laser
reception window
Volume selection
Measuring unit
selection
Impact protection
with non-slip ribbing
REC 300 Digital Receiver: measure more
intelligently – work more efficiently.
Digital display of the reference deviation in mm.
Read the deviation from the reference height directly
in figures: exact mm readings. E.g. faster and more
precise correction of strut positions and concrete
levels. No troublesome moving the receiver on
the levelling rod.
+ 34 mm
– 12 mm
+ 5 mm
Measuring made simple.
A series of symbols indicate your distance from the
reference height and whether you are too high or low.
Two sensitivity levels simplify setting-up over longer
or shorter distances. If you also switch on the acoustic
signals, you can select two volume levels.
Extremely practical: the double display.
LAR 200/LAR 250 LAR 250
Water and dust-proof to IP 67.
Horizontal levelling Vertical levelling
STABILA laser measuring instruments 26–27