LA 180 L - Stabila

Very flexible in use – Part 1.
Switch on – ready to use.
The STABILA LAX 50 projects
crossed horizontal and vertical
lines in a matter of seconds –
both perfectly levelled. Ready
for all internal work. The result –
long, easily visible horizontal
and vertical laser lines at right
angles to each other which
make setting-out easy.
Laser functions
Laser
class
Output Laser
wavelength
Levelling
accuracy
For the installation of
built-in furniture, laying
tiles, wall-papering and all
installation work. Setting
out without a single pencil
mark. That’s clean working
Self-levelling crossed line laser
Type LAX 50 including combined
tripod/telescopic leg kit
Comprising: Type LAX 50 crossed line laser with combined tripod /
telescopic leg kit.
Range of
visible line
Battery
life
Art. No.
2 ‹ 1 mW 635 nm ± 0.5 mm/m 10 m 30 hours 16789/9
LAX 50
max.
2.75 m
Very flexible in use – Part 2.
The main attraction – the
combined tripod / telescopic
leg kit. Unscrew the tripod
legs and screw together to
form the telescopic leg –
fix the LAX 50 to the leg –
and measure! The tripod
covers a working height
of 0.6–1 m. The telescopic
leg can be jammed inbetween
floor and ceiling of heights up
to 2.75 m. If the LAX 50 is
placed on the ground, its
working height is 7 cm. Its
versatility makes the STABILA
LAX 50 a regular partner for
all occasions.
Accurate even when used by just one person – change location quickly. The clever tripod-telescopic leg
combination makes the LAX 50 a superb all-round laser.
STABILA laser measuring instruments 14–15