CUTTING TOOLS
archivo2-catalogos-27 archivo2-catalogos-27
CARBIDE HSS THREAD MILLS L41A1 SERIES L42A1 SERIES UNCOATED TiAlN THREAD MILLS CARBIDE TAPS PRIME TAPS COMBO TAPS M Solid Carbide Drill and Thread Mill with Chamfer for ISO Metric Internal Thread - DIN 13 VOLLHARTMETALL Bohrgewindefräser mit Senkfase für ISO metrische Innengewinde - DIN 13 FRAISES À FILETER ET À PERCER CARBURE MONOBLOC AVEC CHANFREIN POUR FILETAGE INTER - DIN13 Fresa fora, filetta e smussa , filettature interne, ISO metriche passo grosso - DIN 13 D2 Detail "A" DS 45。 D1 L1 LS 45。 LS L3 140。 D3 SPIRAL FLUTE TAPS D4 L2 A DS L1 D1 SPIRAL POINT TAPS STRAIGHT FLUTE TAPS COLD FORMING TAPS NUT TAPS STI TAPS HAND TAPS ▶ Material : Solid Carbide ▶ Shank : DIN6535 HA ▶ Thread Length : 2×D ▶ No. of Flute : 2 ▶ 140。 Drill Point, 90。 Countersink ▶ Drilling, Chamfering and Thread milling EDP No. UNCOATED TiAlN L41A1310 L41A1360 L41A1420 L41A1500 L41A1540 L42A1310 L42A1360 L42A1420 L42A1500 L42A1540 Nominal Diameter [ D ] M6 M8 M10 M12 M14 Pitch 1.0 1.25 1.5 1.75 2.0 4.75 6.35 7.95 9.95 11.20 *Other coatings are available on your request P Cutter Diameter D1 ▶ Material : Vollhartmetall ▶ Schaft : DIN 6535 HA ▶ Gewindeläge : 2×D ▶ Anz. der Nuten : 2 ▶ 140° Spitzenwinkel, 90° Senkwinkel ▶ Bohren, Senken und Gewindefräsen Shank Diameter D2 8 10 12 14 16 Effect. Diameter Ds 6.3 8.3 10.3 12.3 14.3 Drill Diameter D3 5.00 6.75 8.50 10.25 12.00 Max. C'sink D4 6.6 9.0 11.0 13.5 15.5 Thread Length L1 13.00 16.27 21.05 24.21 29.58 Effect. Length Ls 14.68 18.48 23.77 27.25 33.32 Drill Length L3 1.00 1.25 1.50 1.50 1.50 Unit : mm Over All Length L2 62 74 79 89 102 PIPE TAPS TECHNICAL DATA ◎ : Excellent ◯ : Good P H M K N S Carbon Steels Alloy Steels Heat Treated Steels High Hardened Steels Stainless Steels Cast Iron Non Ferrous Materials Titanium Alloys Chrome-Nickel Alloys ◎ ◎ • 436 phone:+82-32-526-0909, www.yg1.kr, E-mail:yg1@yg1.kr
THREAD MILLS SUPER CUTTING TAPS HOCHLEISTUNGS GEWINDEBOHRER CARBIDE HSS PROGRAMMING OF THREAD MILLING PROGRAMMIERUNG BEIM GEWINDEFRÄSEN THREAD MILLS Program Date CARBIDE TAPS G Codes for Thread Milling G00 G01 G02 Fast Feed Linear Linear Movement Circular/Helical Interpolation C.W. G90 G91 M03 Absolute Command Incremental Command Clockwise Rotation of Spindle PRIME TAPS COMBO TAPS G03 G17 Circular/Helical Interpolation A.C.W. X, Y Plane (Vertical Machining) M05 M08 Spindle Stop Coolant On SPIRAL FLUTE TAPS G18 G19 Z, X Plane (Horizontal Machining) Y, Z Plane (Using 90。 Head) X Y Horizontal Co-ordinate Horizontal Co-ordinate SPIRAL POINT TAPS G40 G41 G42 G43 Cutter Radius Compensation Cancel Cutter Radius Compensation Left Cutter Radius Compensation Right Tool Length Compensation Plus Z I J S Vertical Co-ordinate X Co-ordinate to Center of Arc Travel Y Co-ordinate to Center of Arc Travel Spindle Speed R.P.M. STRAIGHT FLUTE TAPS COLD FORMING TAPS G49 Tool Length Compensation Cancel F Feed mm/min NUT TAPS CNC Internal Thread Milling STI TAPS G54 G90 G00 X… Y… Z2 T1 S… M03 G91 G00 Z-…(A3+2) G41 G01 D26 X…(A6) Y…(A5) F… G03 X-…(A6) Y…(A6) Z…(A4) I-…(A6) J0 G03 X0 Y0 Z…(A2) I0 J-…(A1) G03 X-…(A6) Y-…(A6) Z…(A4) I0 J-…(A6) G00 G40 X…(A6) Y-…(A5) G00 Z…(A7) G90 G49 G00 Z200 M5 M30 HAND TAPS PIPE TAPS TECHNICAL DATA A1 : 1/2 Nominal Thread Diameter 1/2D A2 : Thread Pitch A3 : Thread Depth A4 : 1/4P(for climb milling and right-hand thread) A5 : Beginning of Contour in Y 0.5xP A6 : Arc Off (A1 - A5) A7 : A3+2-0.5P T1 : Cutter radius to be programmed is nomally included in the tool memory phone:+82-32-526-0909, www.yg1.kr, E-mail:yg1@yg1.kr • 437
- Page 385 and 386: THREADING TOOLS ■ CARBIDE THREADI
- Page 387 and 388: Contents / THREADING TOOLS SOLID CA
- Page 389 and 390: THREADING TOOLS index Carbon Steels
- Page 391 and 392: • 391 phone:+82-32-526-0909, www.
- Page 393 and 394: THREADING TOOLS index SPIRAL FLUTE
- Page 395 and 396: THREADING TOOLS index SPIRAL POINT
- Page 397 and 398: THREADING TOOLS index HSS HAND TAPS
- Page 399 and 400: MU MU MU MU MU MU MU MU MU MU MU MU
- Page 401 and 402: MU MU MU MU MU MU MU MU MU MU MU MU
- Page 403 and 404: GS VG VG VG VG VG VG VG VG VG VG VG
- Page 405 and 406: VA NW NW VA VA VA NW VA NW VA NW VA
- Page 407 and 408: GV GV GV GV GV GV GV Al Al Al Al Al
- Page 409 and 410: SURFACE TREATMENT AND COATING The a
- Page 411 and 412: W.Nr 10 - STEEL GERMANY DIN MATERIA
- Page 413 and 414: W.Nr GERMANY DIN MATERIAL GROUP STA
- Page 415 and 416: W.Nr GERMANY DIN MATERIAL GROUP STA
- Page 417 and 418: CARBIDE Leading Through Innovation
- Page 419 and 420: SOLID SOLID CARBIDE CARBIDE DREAM T
- Page 421 and 422: CARBIDE THREAD MILLS Solid Carbide
- Page 423 and 424: CARBIDE THREAD MILLS Solid Carbide
- Page 425 and 426: CARBIDE THREAD MILLS Solid Carbide
- Page 427 and 428: CARBIDE THREAD MILLS Solid Carbide
- Page 429 and 430: CARBIDE THREAD MILLS Solid Carbide
- Page 431 and 432: CARBIDE THREAD MILLS Solid Carbide
- Page 433 and 434: CARBIDE UNC ▶ Short thread length
- Page 435: CARBIDE UNC ▶ Short thread length
- Page 439 and 440: THREAD MILLS SUPER CUTTING TAPS HOC
- Page 441 and 442: CARBIDE Leading Through Innovation
- Page 443 and 444: CARBIDE CARBIDE TAPS ISO metric coa
- Page 445 and 446: CARBIDE Hole type 2.0×D CARBIDE TA
- Page 447 and 448: HSS Leading Through Innovation PRIM
- Page 449 and 450: CARBIDE PRIME TAPS ISO Metric coars
- Page 451 and 452: CARBIDE L1 L3 PRIME TAPS ISO Metric
- Page 453 and 454: PRIME TAPS Unified fine threads Uni
- Page 455 and 456: CARBIDE L1 PRIME TAPS ISO Metric fi
- Page 457 and 458: CARBIDE L1 L3 PRIME TAPS D1 Unified
- Page 459 and 460: HSS Leading Through Innovation COMB
- Page 461 and 462: COMBO TAPS ● SPIRAL FLUTE TAP ●
- Page 463 and 464: M Hole type COMBO TAPS ISO Metric c
- Page 465 and 466: M Hole type COMBO TAPS ISO Metric c
- Page 467 and 468: MF Hole type L1 COMBO TAPS ISO Metr
- Page 469 and 470: CARBIDE MF Hole type 2.5×D L1 COMB
- Page 471 and 472: CARBIDE COMBO TAPS ISO Metric coars
- Page 473 and 474: CARBIDE COMBO TAPS ISO Metric coars
- Page 475 and 476: CARBIDE COMBO TAPS ISO Metric fine
- Page 477 and 478: Hole type L1 HSS-E L3 COMBO TAPS D1
- Page 479 and 480: Hole type COMBO TAPS Unified fine t
- Page 481 and 482: Hole type COMBO TAPS ISO Metric coa
- Page 483 and 484: Hole type COMBO TAPS ISO Metric coa
- Page 485 and 486: Hole type COMBO TAPS ISO Metric coa
THREAD MILLS<br />
SUPER <strong>CUTTING</strong> TAPS<br />
HOCHLEISTUNGS GEWINDEBOHRER<br />
CARBIDE<br />
HSS<br />
PROGRAMMING OF THREAD MILLING<br />
PROGRAMMIERUNG BEIM GEWINDEFRÄSEN<br />
THREAD<br />
MILLS<br />
Program Date<br />
CARBIDE<br />
TAPS<br />
G Codes for Thread Milling<br />
G00<br />
G01<br />
G02<br />
Fast Feed Linear<br />
Linear Movement<br />
Circular/Helical Interpolation C.W.<br />
G90<br />
G91<br />
M03<br />
Absolute Command<br />
Incremental Command<br />
Clockwise Rotation of Spindle<br />
PRIME<br />
TAPS<br />
COMBO<br />
TAPS<br />
G03<br />
G17<br />
Circular/Helical Interpolation A.C.W.<br />
X, Y Plane (Vertical Machining)<br />
M05<br />
M08<br />
Spindle Stop<br />
Coolant On<br />
SPIRAL<br />
FLUTE TAPS<br />
G18<br />
G19<br />
Z, X Plane (Horizontal Machining)<br />
Y, Z Plane (Using 90。 Head)<br />
X<br />
Y<br />
Horizontal Co-ordinate<br />
Horizontal Co-ordinate<br />
SPIRAL<br />
POINT TAPS<br />
G40<br />
G41<br />
G42<br />
G43<br />
Cutter Radius Compensation Cancel<br />
Cutter Radius Compensation Left<br />
Cutter Radius Compensation Right<br />
Tool Length Compensation Plus<br />
Z<br />
I<br />
J<br />
S<br />
Vertical Co-ordinate<br />
X Co-ordinate to Center of Arc Travel<br />
Y Co-ordinate to Center of Arc Travel<br />
Spindle Speed R.P.M.<br />
STRAIGHT<br />
FLUTE TAPS<br />
COLD<br />
FORMING<br />
TAPS<br />
G49<br />
Tool Length Compensation Cancel<br />
F<br />
Feed mm/min<br />
NUT TAPS<br />
CNC Internal Thread Milling<br />
STI TAPS<br />
G54 G90 G00 X… Y… Z2 T1 S… M03<br />
G91 G00 Z-…(A3+2)<br />
G41 G01 D26 X…(A6) Y…(A5) F…<br />
G03 X-…(A6) Y…(A6) Z…(A4) I-…(A6) J0<br />
G03 X0 Y0 Z…(A2) I0 J-…(A1)<br />
G03 X-…(A6) Y-…(A6) Z…(A4) I0 J-…(A6)<br />
G00 G40 X…(A6) Y-…(A5)<br />
G00 Z…(A7)<br />
G90 G49 G00 Z200 M5<br />
M30<br />
HAND TAPS<br />
PIPE TAPS<br />
TECHNICAL<br />
DATA<br />
<br />
A1 : 1/2 Nominal Thread Diameter 1/2D<br />
A2 : Thread Pitch<br />
A3 : Thread Depth<br />
A4 : 1/4P(for climb milling and right-hand thread)<br />
A5 : Beginning of Contour in Y 0.5xP<br />
A6 : Arc Off (A1 - A5)<br />
A7 : A3+2-0.5P<br />
T1 : Cutter radius to be programmed is<br />
nomally included in the tool memory<br />
phone:+82-32-526-0909, www.yg1.kr, E-mail:yg1@yg1.kr<br />
• 437