DOORS and PARTITION WALL SYSTEMS - sitec

DOORS and PARTITION WALL SYSTEMS
SITEC supplies doors and partition wall systems to create reception areas and workspaces.
Our P 2001 system can combine a wide range of security requirements (bullet, break-in and fire resistance) with a uniform appearance.
The system is equally suitable for exterior use, as it can be supplied in a thermally insulated design.
Doors can be supplied in standard sizes or in customised sizes.
For large, complete projects, we would be delighted to manage the planning and project management, right up to handover of the finished
product.
Security Doors – System P 2001 with Ingot Tongs
Our doors can be delivered with the following specifications:
Bullet-Resistance: up to FB 7 with bullet-proof glass up to BR 7 NS or panel infills
Break-in-Resistance: up to RC 4 with bullet-proof glass up to P7B or panel infills
Fire-Resistance: up to EI 60
Combinations of the different requirements are possible - pls. let us have your inquiry!
Execution: with or without cross-bar, powder-coated
Standard sizes WxH: 1.000 x 2.150 (inside dimension 636 x 2.017 mm)
1.125 x 2.150 (inside dimension 761 x 2.017 mm)
1.250 x 2.150 (inside dimension 886 x 2.017 mm)
1.250 x 2.500 (inside dimension 886 x 2.367 mm)
Security Partition Walls – System P 2001
– Other sizes and requirements on request –
Our partition walls can be delivered for the following specifications:
Bullet-Resistance: up to FB 7 with bullet-proof glass up to BR 7 NS or panel infills
Break-in-Resistance: up to RC 4 with bullet-proof glass up to P7B or panel infills
Fire-Resistance: up to EI 60
Combinations of the different requirements are possible - pls. let us have your inquiry!
Execution: with or without cross-bar, powder-coated
Standard sizes WxH: 500 x 2.150 (or height 2.500 mm)
750 x 2.150 (or height 2.500 mm)
1.000 x 2.150 (or height 2.500 mm)
1.250 x 2.150 (or height 2.500 mm)
Automatic Sliding Door WK 3 – System P 2001
– Other sizes and requirements on request –
Break-in resistant, two-leaf sliding door system, made from steel-tube frames, glazed with aluminium covers
Link:
http://www.sitec.de/en/products/doors-and-partition-wall-systems/
2012-12-11 17:08
Subject to technical changes
© SITEC GmbH 2000 — 2012
Johann-Georg-Herzog-Str. 19
D-96369 Weissenbrunn • Germany
Tel. +49 (0) 9261 - 60 75 0 • Fax +49 (0) 9261 - 60 75 10
eMail: info@sitec.de • http://www.sitec.de
Page 1 of 2

DOORS and PARTITION WALL SYSTEMS
Break-in Resistance: Resistance class RC 3, tested to DIN V ENV 1627
Glazing: insulated glazing, anti-bandit according to DIN EN 356, resistance class P6B
Execution: one- or two leaf,
Cover profiles powder-coated
Facing width of only 76 mm, thus ideally suited for combination with SITEC P 2001 vertical and
horizontal stanchion system
Standard Sizes: Pass-through width up to 2.000 mm
Pass-through height up to 2.100 mm
– Different sizes and executions possible - Please let us have your inquiry!
Link:
http://www.sitec.de/en/products/doors-and-partition-wall-systems/
2012-12-11 17:08
Subject to technical changes
© SITEC GmbH 2000 — 2012
Johann-Georg-Herzog-Str. 19
D-96369 Weissenbrunn • Germany
Tel. +49 (0) 9261 - 60 75 0 • Fax +49 (0) 9261 - 60 75 10
eMail: info@sitec.de • http://www.sitec.de
Page 2 of 2