RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)

Fittings - Luer-Lock Connectors
THOMAFLUID ® -Luer-Lock Adapter (Female)
with Male Thread
Product specification
• Female luer-lock adapter with male G-, UNF- or M-thread.
• ​ The connector is suitable for max. 10 bar (at +20 ° C).
One-Piece Connectors - Plastics
Item Internal l1 L WAF Material Unit Price
thread
(SW)
​ ​ mm mm mm ​ piece EURO
158430 G 1/8“ 10 20 14 PP 1 12.00
158431 G 1/8“ 10 20 14 PVDF 1 16.00
158432 G 1/8“ 10 20 14 PFA 1 38.00
Capillary Connectors (HPLC)
THOMAFLUID ® -Capillary Connectors
Item External l1 l2 L WAF Material
Unit Price
thread
​ ​ mm mm mm mm ​ piece EURO
158410 G 1/8“ 8 7 20 14 PP 1 9.00
158411 G 1/8“ 8 7 20 14 PVDF 1 14.00
158412 G 1/8“ 8 7 20 14 PFA 1 31.00
158413 G 1/4“ 12 7 26 17 PP 1 12.00
158414 G 1/4“ 12 7 26 17 PVDF 1 17.00
158415 G 1/4“ 12 7 26 17 PFA 1 38.00
158416 UNF 1/4“-28 8 7 20 12 PP 1 12.00
158417 UNF 1/4“-28 8 7 20 12 PVDF 1 17.00
158418 UNF 1/4“-28 8 7 20 12 PFA 1 38.00
158419 M5 x 0.8 6 7 21 14 PP 1 12.00
158420 M5 x 0.8 6 7 21 14 PVDF 1 17.00
158421 M5 x 0.8 6 7 21 14 PFA 1 38.00
158422 M6 x 1 8 7 23 14 PP 1 12.00
158423 M6 x 1 8 7 23 14 PVDF 1 17.00
158424 M6 x 1 8 7 23 14 PFA 1 38.00
158425 M8 x 1.25 8 7 23 17 PP 1 15.00
158426 M8 x 1.25 8 7 23 17 PVDF 1 21.00
158427 M8 x 1.25 8 7 23 17 PFA 1 45.00
158428 M10 x 1.5 8 7 23 17 PP 1 19.00
158429 M10 x 1.5 8 7 23 17 PVDF 1 26.00
158465 M10 x 1.5 8 7 23 17 PFA 1 54.00
General product specification
• MULTIFIT ® -Flanged Fittings:
MULTIFIT ® -flanged fittings are pressure- and tensile-resistant tubing
connections for fixed installation of tubing on metering systems,
chromatographs, automatic analysers, hydraulic and pneumatic units,
for pressure and vacuum, for all kinds of media in a wide temperature
range. The connection can be established in two ways.
• 1. By means of a thermoflange:
Advantage: Inexpensive and simple connection if a thermoflange
machine is available. For PTFE tubing only.
Joint assembly: The tube is passed through the fitting hollow nut the
thread of which points to the tube end. A washer is slipped over the
tube. The flange is produced within seconds by pushing the tube on
the electrically heated drift of the thermoflange machine. The flanged
tube end with the washer behind it is inserted in the taphole of the
coupling piece and the hollow nut is tightened manually.
• 2. By means of an adapter:
Advantage: The connection is suitable not only for PTFE tubing but also
for flexible tubing such as silicone or PVC.
Joint assembly: The tube is passed through the fitting hollow nut the
thread of which points to the tube end. The tube end is expanded by
sliding it on the drift of the special tool. A fitting adapter, put on the
retaining pin of the special tool, is inserted in the expanded tube end.
The tube end inserted into the adapter is slipped into the taphole of the
coupling piece and the hollow nut is tightened manually.
THOMAFLUID ® -Luer-Lock Adapter (Male)
with Female Thread
Product specification
• Male luer-lock adapter with female G-thread
• ​ The connector is suitable for max. 10 bar (at +20 ° C)
By means of an adapter
By means of a ferrule
THOMAFLUID ® II - 2015 97