RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)

Tubing - Cutters and Saws
Product specification
• Cutting gun with special, self-resetting and interchangeable cutting
tool for materials with diameters up to 35 mm, burr-free cuts of high
angularity ensured by involved cutting device; safely to handle, to
​ operate easily and without expenditure of force.
Item Design Unit Price
​ ​ piece EURO
49994 Cutter 1 90.00
49995 Replacement blade 1 39.00
THOMAFLUID ® -Tubing Cutting Pliers
​
Clamps and Cutters
covered knife-like hard metal rotary cutter and slip-proof arresting
device for the capillary to be prepared.
• The capillary is inserted on its cutting site into the deeply grooved
keeper slot of the THOMACHROM ® -Metal Capillary Cutter and arrested
in the loading device by the salient non-slip knurled screw. Thereby,
the rotary cutter is pressed against the capillary. By rotating the cutter
around the capillary, it is cut in constantly and neatly. Thereafter, the
knurled screw is tightened again and the notch is deepened to the
required extent as described above. The arresting is unlocked and by
slightly pressing at the thus produced predetermined breaking-point
​ the correctly pre-cutted capillary is broken burr-free.
Item Design Unit Price
​ ​ piece EURO
83384 Cutter 1 145.00
83385 Replacement blade 1 36.00
THOMACHROM ® -Pipe Saw
Product specification
• ​ For cutting of capillaries varying in diameter from 1.6 to 3.2 mm.
Item Design Unit Price
​ ​ piece EURO
14654 Cutting pliers 1 79.00
14655 Replacement blade 1 13.00
THOMAFLUID ® -Capillary Cutter Guillotine
Product specification
• For burr-free and absolutely perpendicular cutting of rigid capillaries
made of PEEK, PTFE, PVDF, PFA, FEP, ETFE, PA and PE with outside
diameters varying from 1/16” (1.6 mm) to 1/8” (3.2 mm)
​• Cutting blade is interchangeable (replacement blade)
Item Design Unit Price
​ ​ piece EURO
97511 Cutter 1 99.00
THOMACHROM ® -Pipe Cutter
Product specification
• For easy cutting (rotation) of tubes made of every kind of material,
​ from diameters of 3 mm onwards, with replacement rotary cutter.
Item Design Unit Price
​ ​ piece EURO
14626 Cutter 1 46.00
14627 Replacement blade 3 16.00
THOMACHROM ® -Capillary Cutter made of Metal
Product specification
• Tool for precise cutting and preparing of 1/16“ metal capillaries
(stainless steel, titanium etc.) and steel jacketed glass capillaries,
for dimensionally stable, perpendicular, and burr-free cuts without
alteration of lumen and correction of the cutting site.
• Safe to handle loading device made of anodized light metal with
Item Design Unit Price
​ ​ piece EURO
97510 Cutter 1 61.00
88 THOMAFLUID ® II - 2015