RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)

Tubing - PVDF Tubing
Tubing and Pipes made of Rigid Plastics
Item Inside Outside I-Ø Max. op. Working Price
Ø Ø spiral pressure 1 length
​ mm mm mm bar m EURO
338711 4 6 40 18 2.5 74.00
338712 4 6 40 18 6 120.00
338713 6 8 50 12 2.5 92.00
338714 6 8 50 12 6 156.00
1
at +20 °C
THOMAFLUID ® -High-Tech-PVDF Corrugated Tubing
Application area
• Protection of lines at stationary installation and building, particularly
under unfavourable environmental conditions in the areas of machine
engineering, chemical apparatus construction, electronics.
• Conveyance of aggressive as well as sensitive liquid and gaseous media
at mobile and vibrating apparatuses and equipments in the areas
of environmental research, environmental analytics, semiconductor
production, chemical process automatization, biotechnology, nuclear
technology and radiochemistry.
Product specification
• Temperature resistant corrugated tubing made of flame-resistant,
highly stable fluorocarbon material polyvinylidene fluoride (PVDF),
transparent, black or brown coloured. Flexible, mechanically
strongly loadable, particularly high abrasion resistance and impact
toughness even at low temperatures, favourable electric properties;
biocompatible, sterilizable at +121 °C. Highest chemical resistance to
nearly all aggressive media such as halogens, ozone, strong acids and
alkalis, solvents, and aromatic hydrocarbons; limited use with aliphatic
solvents such as acetone and ethyl acetate, unstable to fuming sulfuric
acid, acetic anhydride, and amines.
Technical specification
• Material: PVDF (polyvinylidene fluoride)
• Temperature range: -40 to +140 °C (DIN 53446)
• Density: 1.78 to 2.00 g/cm 3 (DIN 53479)
• Tearing strength: 40 - 60 N/mm 2 (DIN 53455)
• Elongation at break: 20 - 30 % (DIN 53455)
• E-modulus: 1800 - 3300 N/mm 2 (DIN 53457)
• Impact toughness: without break (DIN 53453)
• Notch impact strength: 10 until without break (DIN 53453)
• Linear expansion coefficient: 0.8 - 1.4 x 10 -4 x K -1 (DIN 52523)
• Thermal conductivity: 0.12 - 0.19 W/mK (DIN 52612)
• Track resistance: KA1 (DIN 53480)
• Dielectric strength: 60 - 100 kV/mm (DIN 53481)
• Sterilization: autoclavable (+121 °C); in gas (ethylene oxide);
​ in hot air (+160 °C)
Item
Nominal
width
Inside
Ø
Outside
Ø
Min.
bending
radius
Colour Unit Price
​ mm mm mm mm ​ m EURO
43388 8.5 8.3 11.3 32 nature 1 38.00
43389 8.5 8.3 11.3 32 nature 5 120.00
43400 13 12.3 15.6 45 nature 1 43.00
43401 13 12.3 15.6 45 nature 5 140.00
43402 13 12.3 15.6 45 nature 10 181.00
43403 14 13.9 18.3 50 nature 1 53.00
43404 14 13.9 18.3 50 nature 5 152.00
43421 11 10.4 13.4 40 black 1 42.00
43422 11 10.4 13.4 40 black 5 132.00
43423 11 10.4 13.4 40 black 10 170.00
43436 17 16.2 20.7 55 black 1 68.00
THOMAFLUID ® -High-Tech PVDF Shrinkable Tubing –
Semirigid
Application area
• Insulation of heating element connections
• Protection and tension-relief of high-temperature resistant components
• Protection of soldered and crimp connections
• Protection from chemical impacts, e.g. electro-plating bathes.
General product specification
• High dielectric strength
• Unmeltable and self-extinguishing
• UL / CSA and VG-approved
• High chemical resistance
• Highest abrasion resistance
General technical specification
• Material: PVDF (polyvinylidene fluoride)
• Colour: natural-transparent
• Temperature range: -55 to +175 °C
• Shrinking rate: 2:1
• Shrinkage temperature: +175 °C
• Storage temperature: max.+50 °C
• Radial shrinkage: 50 %
• Longitudinal shrinkage: max. 10 %
• Tensile strength: >34.6 MPa
• Elongation at break: >150 %
• Dielectric strength: 25 kV/mm min.
• Dielectric constant: max. 5.5
• Volume Resistivity: 10 13 ​
Ohm x cm min.
76 THOMAFLUID ® II - 2015