RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)

More documents

Recommendations

Info

Tubing - PI Tubing Item Nominal width Inside Ø Outside Ø Wall thickness Min. bending radius Unit Price mm mm mm mm mm m EURO 48286 8 7.7 10.7 2.2 15 1 56.00 48287 8 7.7 10.7 2.2 15 5 160.00 48288 8 7.7 10.7 2.2 15 10 263.00 48289 10 9.7 13 2.2 18 1 61.00 48290 10 9.7 13 2.2 18 5 172.00 48291 10 9.7 13 2.2 18 10 284.00 48292 13 12.4 16.1 3.1 23 1 84.00 48293 13 12.4 16.1 3.1 23 5 240.00 48294 13 12.4 16.1 3.1 23 10 395.00 48295 14 13.7 17.8 3.1 25 1 94.00 48296 14 13.7 17.8 3.1 25 5 270.00 48297 14 13.7 17.8 3.1 25 10 446.00 48298 16 15.4 19.7 3.1 28 1 119.00 48299 16 15.4 19.7 3.1 28 5 338.00 48300 16 15.4 19.7 3.1 28 10 557.00 48301 17 16.5 21.1 3.5 30 1 119.00 48302 17 16.5 21.1 3.5 30 5 338.00 48303 18 18.4 23.1 3.5 32 1 132.00 48304 18 18.4 23.1 3.5 32 5 375.00 48305 21 19.8 24.8 3.5 35 1 143.00 48306 21 19.8 24.8 3.5 35 5 405.00 Tubing and Pipes made of Rigid Plastics Technical specification • Material: PI (polyimide) • Temperature range: -240 to +240 °C, for a short time +300 °C • Dielectric strength: 78.7 kV/mm wall thickness (approx. 2 kV/25 m) • Tensile strength: 305 MPa • Elongation at break: +50 % • Flexibility and wall stiffness: very good • Abrasion resistance: very good • Resistance to radiation: very good • Thermoplastic flow: >400 °C (no toxic decomposition products formed) • Inflammability: not inflammable (no toxic decomposition products formed) • Carbonization at: approx. +850 °C (no toxic decomposition products formed) • Copper-alu-silver-corrosion: none • Tolerance: inside Ø: ±5 % wall thickness: ±0.00635 mm PI Tubing THOMAFLUID ® -PI Micro Capillary Tubing Application area • Chemistry: For corrosive and aggressive media, for laboratory probes, for micro analysers and titrators, for fluid and gas flow transport in chemical-analytical and biomedical systems. • Electronics and electrical engineering: Connection of microcables, insulation of microcables (coaxial cables), high-temperature insulation, micro coil forms, sheathing and plug-in channel for micro glass-fibre (laser) optics, micro sensors, precision micro slip rings. • Computer, nuclear engineering: For use in systems with maximum packing density, for reduction of weight and for applications where radiation of high energy density (nuclear radiation, X-ray radiation) occurs. • Precision mechanics: Micro bowden cable bushing, guide post for magnetic tape cassettes, heat protection, roller cover, micro pipes for fluids (e.g. ink). Product specification • Polyimide micro tubing is absolutely seamless and non-porous. It has smallest inside diameters and wall thicknesses, in the range of 0.080 to 1.151 mm and 0.013 to 0.051 mm respectively. Despite the extremely high wall stiffness the tubing can be bended springily to small radii. • PI micro tubing is chemically resistant and is usually used in applications where fluoroplastic tubing (e.g. PTFE tubing) is preferred. • Its chemical resistance combined with its mechanical, electrical, and thermal stability is outstanding. • Its manufacturing tolerances are extremely low leading to an excellent dimensional stability. • At overheating no toxic decomposition products are formed, as it is the case with fluoroplastics limiting there the number of applications. This problem does not occur with PI micro tubing. Item Inside Wall Length Unit Price Ø thickness mm mm mm piece EURO 40946 0.102 0.013 150 1 46.00 40947 0.102 0.013 1,220 1 271.00 40948 0.114 0.013 150 1 46.00 40949 0.114 0.013 1,220 1 271.00 40950 0.127 0.019 150 1 46.00 40951 0.127 0.019 1,220 1 271.00 40952 0.14 0.019 150 1 46.00 40953 0.14 0.019 1,520 1 271.00 40954 0.16 0.019 150 1 46.00 40955 0.16 0.019 1,520 1 271.00 40956 0.18 0.019 150 1 46.00 40957 0.18 0.019 1,520 1 271.00 40958 0.203 0.019 300 1 85.00 40959 0.203 0.019 1,520 1 271.00 40960 0.226 0.019 300 1 85.00 40961 0.226 0.019 1,610 1 271.00 40962 0.254 0.025 300 1 85.00 40963 0.254 0.025 1,610 1 271.00 40964 0.287 0.025 300 1 85.00 40965 0.287 0.025 1,610 1 271.00 40966 0.32 0.025 300 1 85.00 40967 0.32 0.025 1,610 1 271.00 40968 0.36 0.025 300 1 85.00 40969 0.36 0.025 1,610 1 271.00 40970 0.404 0.025 300 1 85.00 40971 0.404 0.025 1,610 1 271.00 40972 0.455 0.025 300 1 85.00 40973 0.455 0.025 1,610 1 271.00 40974 0.51 0.025 300 1 85.00 60 THOMAFLUID ® II - 2015
Tubing - PP Tubing Tubing and Pipes made of Rigid Plastics Item Inside Wall Length Unit Price Ø thickness mm mm mm piece EURO 40975 0.51 0.025 1,610 1 271.00 40976 0.574 0.025 300 1 90.00 40977 0.574 0.025 1,610 1 271.00 40978 0.643 0.025 300 1 90.00 40979 0.643 0.025 1,610 1 271.00 40980 0.724 0.025 300 1 90.00 40981 0.724 0.025 1,610 1 271.00 40982 0.813 0.025 300 1 90.00 40983 0.813 0.025 1,610 1 271.00 40984 0.912 0.051 300 1 90.00 40985 0.912 0.051 1,610 1 271.00 40986 1.024 0.051 300 1 90.00 40987 1.024 0.051 1,610 1 271.00 40988 1.151 0.051 300 1 90.00 40989 1.151 0.051 1,610 1 271.00 Unit Price Item Inside Outside Max. op. Ø Ø pressure 1 mm mm bar m EURO 19062 4.8 6.4 19 15 100.00 19063 4.8 7.9 20 5 77.00 19064 4.8 7.9 20 10 141.00 19065 6.4 9.5 19 5 87.00 19066 6.4 9.5 19 10 159.00 19069 7.9 11.1 10.5 5 105.00 19070 7.9 11.1 10.5 10 192.00 19071 9.5 12.7 14 5 113.00 19072 9.5 12.7 14 10 210.00 19073 12.7 15.9 12 5 118.00 19074 12.7 15.9 12 10 218.00 19075 15.9 19 10 5 126.00 19076 15.9 19 10 10 238.00 19077 19 25.4 3 1 30.00 1 at +20 °C PP Tubing THOMAFLUID ® -PP Chemical Tubing - Standard Product specification • Very good dielectric properties • Good temperature resistance • Extremely good impact and notch impact strength • Thermoforming possible (e.g. for bending-off) • Good chemical resistance to oils, gasoline, and acids, at room temperature to most solvents. Unsuitable for permanent use with halogenated hydrocarbons Technical specification • Material: PP (polypropylene) • Colour: translucent • Shore hardness D: 80° • Temperature range: -40 to +120 °C, for a short time +145 °C • Regulations: FDA, USP XI • Flammability rating: UL 94 HB THOMAFLUID ® -High-Tech-PP Chemical Tubing - calibrated Application area • Process chemistry, Process technology, Water treatment, Heat exchangers, Protecting and insulating tubing Product specification • Good chemical resistance • High temperature resistance • Resistance to hydrolysis • Very good dielectric properties • Higher hardness and stiffness as well as better recovery properties than PE • Lowest water absorption (slightly hygroscopic) • Physiological safety Technical specification • Material: PP (polypropylene) • Colour: natural • Shore hardness D: 72° (DIN 53505) • Temperature range: -25 to +90 °C, for a short time +120 °C • Density: 0.905 g/cm 3 (DIN 53479) • Elongation at break: 600 % (ISO 527) • Tensile strength: 36 MPa (ISO 527) • Bending strength: 1450 MPa (ASTM D790) • Softening temperature: at 10 N (VST/A): +152 °C (ISO 306/A) at 50 N (VST/A): +87 °C (ISO 306/B) • Tolerances outside Ø: ±0.10 mm Unit Price Item Inside Outside Max. op. Ø Ø pressure 1 mm mm bar m EURO 19067 1.6 3.2 19 5 25.00 19068 1.6 3.2 19 15 69.00 19079 3.2 6.4 23 5 33.00 19080 3.2 6.4 23 15 85.00 19061 4.8 6.4 19 5 39.00 THOMAFLUID ® II - 2015 61
Page 1 and 2:
Reichelt Chemietechnik GmbH + Co. T
Page 3 and 4:
Inhaltsübersicht Content: Tubing (
Page 5 and 6:
Tubing - Silicone Tubing Tubing mad
Page 7 and 8:
Page 9 and 10:
Page 11 and 12: Tubing - Silicone Tubing Tubing mad
Page 17 and 18: Tubing - Silicone Tubing Technical
Page 21 and 22: Tubing - Silicone Tubing THOMAFLUID
Page 23 and 24: Tubing - Silicone Tubing Item Insid
Page 25 and 26: Tubing - Silicone Tubing • High c
Page 27 and 28: Tubing - Silicone Tubing Unit Price
Page 29 and 30: Tubing - Silicone Tubing THOMAFLUID
Page 31 and 32: Tubing - TPEE Tubing THOMAFLUID ®
Page 33 and 34: Tubing - FEP Tubing • Water absor
Page 35 and 36: Tubing - FEP Tubing Tubing and Pipe
Page 37 and 38: Tubing - MFA Tubing Product specifi
Page 39 and 40: Tubing - PA Tubing Technical specif
Page 41 and 42: Tubing - PA Tubing Tubing and Pipes
Page 47 and 48: Tubing - PE Tubing Tubing and Pipes
Page 49 and 50: Tubing - PE Tubing THOMAFLUID ® -L
Page 51 and 52: Tubing - PE Tubing THOMAFLUID ® -H
Page 53 and 54: Tubing - PE Tubing THOMAFLUID ® -H
Page 55 and 56: Tubing - PE Tubing Item I-Ø O-Ø M
Page 57 and 58: Tubing - PEEK Tubing Tubing and Pip
Page 59 and 60: Tubing - PFA Tubing Technical speci
Page 61: Tubing - PFA Tubing Tubing and Pipe
Page 65 and 66: Tubing - PTFE Tubing Tubing and Pip
Page 69 and 70: Tubing - PTFE Tubing Technical spec
Page 73 and 74: Tubing - PTFE Tubing Technical spec
Page 75 and 76: Tubing - PTFE Tubing Item Inside Ø
Page 77 and 78: Tubing - PTFE Tubing THOMAFLUID ®
Page 79 and 80: Tubing - PVDF Tubing THOMAFLUID ®
Page 81 and 82: Tubing - Stainless Steel Tubing Ite
Page 83 and 84: Tubing - Titanium and Stainless Ste
Page 85 and 86: Tubing - Hose-/Tubing clamps Clamps
Page 87 and 88: Tubing - Hose-/Tubing clamps Clamps
Page 89 and 90: Tubing - Pipe Clips/-Clamps THOMAFL
Page 91 and 92: Fittings - Luer-Lock Connectors One
Page 93 and 94: Fittings - Luer-Lock Connectors One
Page 95 and 96: Fittings - Luer-Lock Connectors THO
Page 97 and 98: Fittings - Luer-Lock Connectors Den
Page 99 and 100: Fittings - Luer-Lock Connectors THO
Page 101 and 102: Fittings - Capillary Connectors (HP
Page 103 and 104: Fittings - Capillary Connectors (HP
Page 105 and 106: Fittings - Mini Barb Connectors (1.
Page 113 and 114:
Fittings - Tubing Olive Connectors
Page 115 and 116:
Thomafluid ® II To provide you wit
show all

RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?