RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)

Tubing - PFA Tubing
Tubing and Pipes made of Rigid Plastics
Item Inside Ø Outside Ø Unit Price
​ inch inch m EURO
25566 7/32“ 5/16“ 5 588.00
25567 7/32“ 5/16“ 15 1,368.00
25568 7/32“ 5/16“ 30 2,347.00
25569 1/4“ 3/8“ 2.5 438.00
25570 1/4“ 3/8“ 5 656.00
25571 1/4“ 3/8“ 15 1,532.00
25572 1/4“ 3/8“ 30 2,623.00
25573 3/8“ 1/2“ 2.5 609.00
25574 3/8“ 1/2“ 5 916.00
25575 3/8“ 1/2“ 15 2,138.00
25576 3/8“ 1/2“ 30 3,661.00
THOMAFLUID ® -High-Chem-PFA Corrugated Tubing
with Cylindrical End Pieces
Product specification
• Conveying tubing for flexible tubing connections.
• Extremely small bending radii guaranteed.
• Tubing ends fitted with cylindrical end pieces allowing connection with
THOMAFLUID ® pipe connectors.
• Universal resistance to organic and anorganic media.
• Continuous mechanical movements may lead to increased wear of the
bonded connection.
Technical specification
• Material: PFA (perfluoroalkoxy)
• Colour: translucent to clear
• Temperature range: -270 to +260 °C
• Density: 2.12 g/cm 3
• Tearing strength: 16 to 32 N/mm 2
• E-modulus: 200 to 800 N/mm 2
• Linear expansion coefficient: 1.2 to 1.7 x 10 -5 x K -1
• Thermal conductivity: 0.24 W/mK
• Dielectric strength: >20 kV/mm
​• Design: with cylindrical end pieces 40 mm length
Unit Price
Item Nominal I. D. O. D. Max. op. Min.
fitting fitting radius 1
width end end press. 1 bending
​ mm mm mm bar mm m EURO
333939 4.5 2 4 1.7 5 0.5 111.00
333940 4.5 2 4 1.7 5 1 146.00
334200 4.5 2 4 1.7 5 2.5 220.00
12355 8 6 8 2 15 0.5 118.00
12356 8 6 8 2 15 1 156.00
334201 8 6 8 2 15 2.5 242.00
12357 10 8 10 2 18 0.5 126.00
12358 10 8 10 2 18 1 166.00
Unit Price
Item Nominal I. D. O. D. Max. op. Min.
fitting fitting radius 1
width end end press. 1 bending
​ mm mm mm bar mm m EURO
334202 10 8 10 2 18 2.5 258.00
12359 13 10 12 2 23 0.5 136.00
12360 13 10 12 2 23 1 188.00
334203 13 10 12 2 23 2.5 316.00
12361 14 12 14 2 25 0.5 144.00
12362 14 12 14 2 25 1 210.00
334204 14 12 14 2 25 2.5 370.00
12363 16 14 16 2 28 0.5 164.00
12364 16 14 16 2 28 1 226.00
334205 16 14 16 2 28 2.5 394.00
12367 19 16 18 2 32 0.5 226.00
12368 19 16 18 2 32 1 284.00
334206 19 16 18 2 32 2.5 534.00
12369 21 18 20 2 35 0.5 226.00
12370 21 18 20 2 35 1 284.00
334207 21 18 20 2 35 2.5 624.00
334208 23 20.9 25.4 1.2 40 0.5 360.00
334209 23 20.9 25.4 1.2 40 1 456.00
334210 23 20.9 25.4 1.2 40 2.5 726.00
1
at +23 °C
THOMAFLUID ® -High-Chem-PFA Antista Corrugated
Tubing with Cylindrical End Pieces
Application area
• Usable in explosive ambiance (explosion protection)
• For easy handling of liquids and gases
• For transport of solvents and alcohols
• For compensation of thermal expansions
Product specification
• Antistatic conveying tubing for flexible tubing connections.
• Usable in explosive ambiance (explosion protection).
• Tubing ends with cylindrical end pieces, thus directly adaptable to
clamp fittings (THOMAFLUID ® -pipe connections).
• Small bending radii at room temperature (+23 °C).
• Absolutely non-porous.
• Absolutely resistant to organic and anorganic media.
• Tight bending radii only cause little surface changes.
• It is recommended to restrict the maximum operating pressure to
25 % of the burst pressure. For higher temperatures, this value has to
be multiplied by a reduction factor.
Technical specification
• Material: PFA-Ex (perfluoroalkoxy)
• Colour: black
• Temperature range: -270 to +260 °C
• Density: 2.12 g/cm 3
• Burst pressure: 13 bar (at +23 °C)
• Tearing strength: 16 to 32 N/mm 2
• Elastic modulus: 200 to 800 N/mm 2
• Thermal conductivity: 0.24 W/mK
• Surface resistance: 10 5 Ohm
​•
Design: with cylindrical end pieces
58 THOMAFLUID ® II - 2015