RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)

Tubing - Silicone Tubing
THOMAFLUID ® -Silicone Micro-Spaghetti Tubing
for Analytic Technology
Product specification
• Exceptionally resistant to acids and alkaline and other solutions.
• Extruded from high quality, pure silicone.
• Permanent controls of the inside and outside diameters and the wall
thickness ensure continuous performance.
• Physiologically harmless in every respect.
Technical specification
• Material: Silicone (silicone rubber)
• Colour: transparent
• Shore hardness A: 62° ±5° (DIN 53505)
• Temperature range: -60 bis +200 °C, for a short time +250 °C
• Density: 1.14 g/cm 3 (DIN 53749)
• Tearing strength: 11 N/mm 2 (DIN 53504 S1)
• Elongation at break: 385 % (DIN 53504 S1)
• Tear propagation resistance: 21 N/mm 2 (ASTM D 624 Die B)
• Compression set: 35 % (DIN 53517)
• Dielectric strength: ca. 29 KV/mm
• Tolerance inside Ø: up to 2 mm: ±0.15 mm; 2-5 mm: ±0.2 mm;
5-12 mm: ±0.3 mm
• Tolerance wall thickness: up to 3.5 mm: ±0.1 mm;
4-12 mm: ±0.15 mm
​• Regulations: BfR Class XV; FDA 21 CFR177.2600
Item Inside Outside Wall Unit Price
Ø
Ø thickness
​ mm mm mm m EURO
339043 0.635 2.464 0.914 5 81.00
339044 0.635 2.464 0.914 10 135.00
339045 0.762 2.438 0.838 5 81.00
339046 0.762 2.438 0.838 10 135.00
339047 0.889 2.565 0.838 5 81.00
339048 0.889 2.565 0.838 10 135.00
339049 1.016 2.692 0.838 5 81.00
339050 1.016 2.692 0.838 10 135.00
339051 1.143 2.819 0.838 5 81.00
339052 1.143 2.819 0.838 10 135.00
339053 1.295 2.972 0.838 5 81.00
339054 1.295 2.972 0.838 10 135.00
339055 1.422 3.099 0.838 5 81.00
339056 1.422 3.099 0.838 10 135.00
339057 1.524 3.2 0.838 5 81.00
339058 1.524 3.2 0.838 10 135.00
339059 1.651 3.327 0.838 5 81.00
339060 1.651 3.327 0.838 10 135.00
339061 1.854 3.531 0.838 5 81.00
339062 1.854 3.531 0.838 10 135.00
339063 2.057 3.734 0.838 5 81.00
Tubing made of Elastomers (Soft Rubber)
Item Inside Outside Wall Unit Price
Ø
Ø thickness
​ mm mm mm m EURO
339064 2.057 3.734 0.838 10 135.00
339065 2.286 3.962 0.838 5 81.00
339066 2.286 3.962 0.838 10 135.00
339067 2.54 4.216 0.838 5 81.00
339068 2.54 4.216 0.838 10 135.00
339069 2.794 4.47 0.838 5 81.00
339070 2.794 4.47 0.838 10 135.00
THOMAFLUID ® -Silicone Special Compound
Analytical Tubing
Product specification
• Injection-molded of especially high-grade silicone elastomer, annealed
twice for 20 hrs at +20 °C in the rotary furnace.
• Absolutely homogenous quality paired with high flexibility.
• Physiologically safe in every respect.
• Excellent stability in heat and hot air.
• Highest flexibility in cold.
• Very good resistance to ozone, aging, and weather.
• Very good dielectric properties; tested especially for breakdown
strength under wet conditions.
• Antiadhesive surface properties.
• High permeability to gas.
• Good radiation resistance.
• High electrical insulating capacity.
• High resistance to a wide spectrum of chemical compounds.
Technical specification
• Material: Silicone (silicone rubber)
• Colour: transparent
• Shore hardness A: 60° ±5° (DIN 53505)
• Temperature range: -60 to +200 °C (Class H); for a short period +350 °C
• Resistance to hot steam: +140 °C
• Sterilization: steam (+136 °C)
• Embrittlement temperature: -65 °C
• Density: 1.19 g/cm 3
• Rebound elasticity: 35 % (DIN 53505)
• Elongation at break: 300 % (DIN 53504 S2)
• Dielectric strength: ca. 18 KV/mm (VDE 0303)
• Volume Resistivity: 10 15 Ohm x cm/+20 °C (VDE 0303)
• Dielectric constant: 3.2/+25 °C/50 Hz (DIN 53482)
• Tolerances inside Ø and wall thickness:
from 0.2 - 2 mm ±0.15 mm
from 2.5 - 5 mm ±0.25 mm
from 5.5 - 12 mm ±0.3 mm
from 13 - 20 mm ±0.4 mm
from 22 - 30 mm ±0.6 mm
​ above ±0.8 mm
4 THOMAFLUID ® II - 2015