RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)
Thomafluid ® II - Tubings and Pipes analytical Tubing Pressure Tubings Pharmaceutical Tubing Corrugated Tubings Elastomers: Silicone and TPEE Plastics: ETfE, fEP, mfa, Pa, PE, PEEK, Pfa Pi, PP, PTfE und PVdf Metals: Stainless steel and Titanium Connectors luer-/lock Capillary (hPlC) Tubing olive Connectors
Thomafluid ® II - Tubings and Pipes
analytical Tubing
Pressure Tubings
Pharmaceutical Tubing
Corrugated Tubings
Elastomers:
Silicone and TPEE
Plastics:
ETfE, fEP, mfa, Pa, PE, PEEK, Pfa
Pi, PP, PTfE und PVdf
Metals:
Stainless steel and Titanium
Connectors
luer-/lock
Capillary (hPlC)
Tubing olive Connectors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tubing - PE Tubing<br />
THOMAFLUID ® -High-Tech-HDPE Chemical Tubing -<br />
calibrated<br />
Application area<br />
• Protective tubing, compressed air control tubing, low pressure lines,<br />
excess pressure tubing, riser tube for aerosol valves, water technology,<br />
pneumatic conduits at laser equipment, supply lines<br />
Product specification<br />
• <strong>Co</strong>nsiderably lower tendency to stress cracking compared to LDPE<br />
• Excellent mechanical properties, calibrated<br />
• Extremely good impact strength<br />
• Lowest static friction (good coefficient of sliding friction)<br />
• Lowest water absorption<br />
• Very good dielectric properties<br />
• High chemical resistance<br />
• High purity<br />
• Physiologically safe<br />
• High density<br />
• Highest stiffness<br />
• High working pressure<br />
Technical specification<br />
• Material: HDPE (polyethylene of high density)<br />
• <strong>Co</strong>lour: natural<br />
• Shore hardness D: 67° (ISO 868)<br />
• Temperature range: -30 to +80 °C, for a short time +100 °C<br />
• Density: 0.96 g/cm 3 (ISO 1183-D)<br />
• Bending strength: 1100 MPa (ISO 178)<br />
• Tensile strength: 36 MPa (ISO 527)<br />
• Elongation at break: 950 % (ISO 527)<br />
• Softening temperature: +129 °C (ISO 306-A/120)<br />
• Tolerances inside Ø and outside Ø: ±0.10 mm<br />
Tubing and Pipes made of Rigid Plastics<br />
THOMAFLUID ® -High-Tech-HDPE Chemical Tubing -<br />
coloured<br />
Application area<br />
• Apparatus engineering, process engineering, gas engineering,<br />
chemical engineering<br />
Product specification<br />
• High density<br />
• Good weldable (laboratory and container building)<br />
• Hardly absorbs water, floats on the water<br />
• Very low permeability to gas and steam<br />
• Good mechanical stability, good dimensional stability<br />
• High elongation at break and impact resistance<br />
• Good sliding behaviour at lowest wear<br />
• Very good electrical and dielectrical properties<br />
• Burns well and residue-free (CO 2<br />
+ H 2<br />
O as combustion products)<br />
• Good chemical resistance to nearly all polar solutions, acids, alkalis,<br />
alcohols, oils and petrols<br />
• UV-resistant (colour code: black)<br />
Technical specification<br />
• Material: HDPE (high density polyethylene)<br />
• <strong>Co</strong>lour: white, black, red, green, blue, yellow<br />
• Shore hardness D: 66° (DIN 53505)<br />
• Temperature range: -50 to +100 °C<br />
• Density: 0.94 - 0.97 g/cm 3<br />
• Max. operating pressure: 16 bar at +20 °C<br />
• E-modulus: ≈1500 N/mm 2 at +23 °C<br />
• Softening temperature: +135 °C<br />
• Flammability rating: UL 94 HB<br />
Item<br />
Inside<br />
Ø<br />
Outside<br />
Ø<br />
Max. op.<br />
pressure 1<br />
Min.<br />
bending<br />
radius<br />
Unit<br />
Price<br />
mm mm bar mm m EURO<br />
330095 2 4 33 30 5 112.00<br />
330096 2 4 33 30 15 280.00<br />
330097 4 6 20 40 5 114.00<br />
330098 4 6 20 40 15 286.00<br />
330099 6 8 14 50 5 116.00<br />
330100 6 8 14 50 15 290.00<br />
330101 8 10 11 75 5 122.00<br />
330102 8 10 11 75 15 300.00<br />
330103 10 12 9 100 5 130.00<br />
330104 10 12 9 100 15 324.00<br />
1<br />
at +20 °C<br />
Item<br />
Inside<br />
Ø<br />
Outside<br />
Ø<br />
Min.<br />
bending<br />
radius<br />
<strong>Co</strong>lour Unit Price<br />
mm mm mm m EURO<br />
412536 4 6 30 white 5 32.00<br />
412537 4 6 30 white 15 76.00<br />
412538 4 6 30 black 5 32.00<br />
412539 4 6 30 black 15 76.00<br />
412540 4 6 30 red 5 32.00<br />
412541 4 6 30 red 15 76.00<br />
412542 4 6 30 green 5 32.00<br />
412543 4 6 30 green 15 76.00<br />
412544 4 6 30 blue 5 32.00<br />
412545 4 6 30 blue 15 76.00<br />
412546 4 6 30 yellow 5 32.00<br />
412547 4 6 30 yellow 15 76.00<br />
412548 6 8 40 white 5 36.00<br />
412549 6 8 40 white 15 88.00<br />
412550 6 8 40 black 5 36.00<br />
412551 6 8 40 black 15 88.00<br />
THOMAFLUID ® <strong>II</strong> - 2015 51