RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)
Thomafluid ® II - Tubings and Pipes
analytical Tubing
Pressure Tubings
Pharmaceutical Tubing
Corrugated Tubings
Elastomers:
Silicone and TPEE
Plastics:
ETfE, fEP, mfa, Pa, PE, PEEK, Pfa
Pi, PP, PTfE und PVdf
Metals:
Stainless steel and Titanium
Connectors
luer-/lock
Capillary (hPlC)
Tubing olive Connectors
Thomafluid ® II - Tubings and Pipes
analytical Tubing
Pressure Tubings
Pharmaceutical Tubing
Corrugated Tubings
Elastomers:
Silicone and TPEE
Plastics:
ETfE, fEP, mfa, Pa, PE, PEEK, Pfa
Pi, PP, PTfE und PVdf
Metals:
Stainless steel and Titanium
Connectors
luer-/lock
Capillary (hPlC)
Tubing olive Connectors
Tubing - PE Tubing THOMAFLUID ® -LDPE/EVA Pharmaceutical Composite Tubing Application area • Pharmaceutical industry, biotechnology, chemical industry, biochemical process technology Product specification • Pressure tubing. • Liner is inert and neutral, tasteless and odourless. • Liner does not absorb liquids. • Liner meets the requirements of FDA, USDA, National Formulary, and the USP-Standards for food, beverages, pharmaceutical products, laboratory and medical equipment. • Non-toxic. • Jacket is resistant to abrasion and aging. • Neither the jacket nor the liner contain plasticizers or vinyl chloride. Technical specification • Material: Liner: LDPE (polyethylene of low density, highly cross-linked) Jacket: EVA (ethylene vinyl acetate) • Colour: translucent • Temperature range: -35 to +70 °C • Embrittlement temperature: -51 °C • Resistance to aging: very good • Mechanical behaviour: flexible • Sterilization: gas (ethylene oxide); gamma-rays Tubing and Pipes made of Rigid Plastics THOMAFLUID ® -LDPE/EVA Pharmaceutical Composite Tubing - High-Temperature Product specification • Liner is inert and neutral, tasteless and odourless, liner does not absorb liquids, liner meets the requirements of FDA, USDA, National Formulary, and the USP-Standards for food, beverages, pharmaceutical products, laboratory and medical equipment. • Non-toxic. • Jacket is resistant to abrasion and aging. • Neither the jacket nor the liner contain plasticizers or vinyl chloride. Technical specification • Material: Liner: LDPE (polyethylene of low density, highly cross-linked) Jacket: EVA (ethylene vinyl acetate, highly cross-linked) • Colour: translucent • Temperature range: -35 to +95 °C • Embrittlement temperature: -51 °C • Resistance to aging: very good • Mechanical behaviour: flexible • Hemolysis: none Unit Price Item Inside Outside Max. op. Ø Ø pressure 1 mm mm bar m EURO 28000 3.2 4.8 3.3 5 41.00 28001 3.2 4.8 3.3 15 108.00 28002 3.2 6.4 5.5 5 59.00 28003 3.2 6.4 5.5 15 154.00 28006 6.4 9.5 4.5 5 95.00 28007 6.4 9.5 4.5 15 246.00 28008 9.5 12.7 4 5 100.00 28009 9.5 12.7 4 15 261.00 28010 9.5 15.9 5 5 151.00 28011 9.5 15.9 5 15 394.00 28012 12.7 15.9 2.5 5 151.00 28013 12.7 15.9 2.5 15 394.00 28014 12.7 19 4 5 190.00 28015 12.7 19 4 15 420.00 28016 19 25.4 3 15 542.00 28017 25.4 31.8 2 15 660.00 1 at +20 °C Unit Price Item Inside Outside Max. op. Ø Ø pressure 1 mm mm bar m EURO 28019 1.6 4.8 6.5 5 98.00 28020 1.6 4.8 6.5 15 241.00 28021 3.2 4.8 3.3 5 100.00 28022 3.2 4.8 3.3 15 284.00 28023 3.2 6.4 5.5 5 113.00 28024 3.2 6.4 5.5 15 284.00 28027 4.8 6.4 3 5 113.00 28028 4.8 6.4 3 15 284.00 28029 4.8 7.9 4.5 5 149.00 28030 4.8 7.9 4.5 15 356.00 28031 6.4 9.5 4.5 5 162.00 28032 6.4 9.5 4.5 15 389.00 28035 7.9 11.1 4.2 5 202.00 28036 7.9 11.1 4.2 15 445.00 28037 9.5 12.7 4 5 202.00 28038 9.5 12.7 4 15 445.00 28039 9.5 15.9 5 5 236.00 28040 9.5 15.9 5 15 537.00 28041 12.7 15.9 2.5 5 236.00 28042 12.7 15.9 2.5 15 537.00 28045 12.7 19 4 5 302.00 28046 12.7 19 4 15 727.00 28047 19 25.4 3 15 1,018.00 28048 25.4 31.8 2 15 1,355.00 1 at +20 °C 50 THOMAFLUID ® II - 2015
Tubing - PE Tubing THOMAFLUID ® -High-Tech-HDPE Chemical Tubing - calibrated Application area • Protective tubing, compressed air control tubing, low pressure lines, excess pressure tubing, riser tube for aerosol valves, water technology, pneumatic conduits at laser equipment, supply lines Product specification • Considerably lower tendency to stress cracking compared to LDPE • Excellent mechanical properties, calibrated • Extremely good impact strength • Lowest static friction (good coefficient of sliding friction) • Lowest water absorption • Very good dielectric properties • High chemical resistance • High purity • Physiologically safe • High density • Highest stiffness • High working pressure Technical specification • Material: HDPE (polyethylene of high density) • Colour: natural • Shore hardness D: 67° (ISO 868) • Temperature range: -30 to +80 °C, for a short time +100 °C • Density: 0.96 g/cm 3 (ISO 1183-D) • Bending strength: 1100 MPa (ISO 178) • Tensile strength: 36 MPa (ISO 527) • Elongation at break: 950 % (ISO 527) • Softening temperature: +129 °C (ISO 306-A/120) • Tolerances inside Ø and outside Ø: ±0.10 mm Tubing and Pipes made of Rigid Plastics THOMAFLUID ® -High-Tech-HDPE Chemical Tubing - coloured Application area • Apparatus engineering, process engineering, gas engineering, chemical engineering Product specification • High density • Good weldable (laboratory and container building) • Hardly absorbs water, floats on the water • Very low permeability to gas and steam • Good mechanical stability, good dimensional stability • High elongation at break and impact resistance • Good sliding behaviour at lowest wear • Very good electrical and dielectrical properties • Burns well and residue-free (CO 2 + H 2 O as combustion products) • Good chemical resistance to nearly all polar solutions, acids, alkalis, alcohols, oils and petrols • UV-resistant (colour code: black) Technical specification • Material: HDPE (high density polyethylene) • Colour: white, black, red, green, blue, yellow • Shore hardness D: 66° (DIN 53505) • Temperature range: -50 to +100 °C • Density: 0.94 - 0.97 g/cm 3 • Max. operating pressure: 16 bar at +20 °C • E-modulus: ≈1500 N/mm 2 at +23 °C • Softening temperature: +135 °C • Flammability rating: UL 94 HB Item Inside Ø Outside Ø Max. op. pressure 1 Min. bending radius Unit Price mm mm bar mm m EURO 330095 2 4 33 30 5 112.00 330096 2 4 33 30 15 280.00 330097 4 6 20 40 5 114.00 330098 4 6 20 40 15 286.00 330099 6 8 14 50 5 116.00 330100 6 8 14 50 15 290.00 330101 8 10 11 75 5 122.00 330102 8 10 11 75 15 300.00 330103 10 12 9 100 5 130.00 330104 10 12 9 100 15 324.00 1 at +20 °C Item Inside Ø Outside Ø Min. bending radius Colour Unit Price mm mm mm m EURO 412536 4 6 30 white 5 32.00 412537 4 6 30 white 15 76.00 412538 4 6 30 black 5 32.00 412539 4 6 30 black 15 76.00 412540 4 6 30 red 5 32.00 412541 4 6 30 red 15 76.00 412542 4 6 30 green 5 32.00 412543 4 6 30 green 15 76.00 412544 4 6 30 blue 5 32.00 412545 4 6 30 blue 15 76.00 412546 4 6 30 yellow 5 32.00 412547 4 6 30 yellow 15 76.00 412548 6 8 40 white 5 36.00 412549 6 8 40 white 15 88.00 412550 6 8 40 black 5 36.00 412551 6 8 40 black 15 88.00 THOMAFLUID ® II - 2015 51
- Page 1 and 2: Reichelt Chemietechnik GmbH + Co. T
- Page 3 and 4: Inhaltsübersicht Content: Tubing (
- Page 5 and 6: Tubing - Silicone Tubing Tubing mad
- Page 7 and 8: Tubing - Silicone Tubing Tubing mad
- Page 9 and 10: Tubing - Silicone Tubing Tubing mad
- Page 11 and 12: Tubing - Silicone Tubing Tubing mad
- Page 13 and 14: Tubing - Silicone Tubing Tubing mad
- Page 15 and 16: Tubing - Silicone Tubing Tubing mad
- Page 17 and 18: Tubing - Silicone Tubing Technical
- Page 19 and 20: Tubing - Silicone Tubing Tubing mad
- Page 21 and 22: Tubing - Silicone Tubing THOMAFLUID
- Page 23 and 24: Tubing - Silicone Tubing Item Insid
- Page 25 and 26: Tubing - Silicone Tubing • High c
- Page 27 and 28: Tubing - Silicone Tubing Unit Price
- Page 29 and 30: Tubing - Silicone Tubing THOMAFLUID
- Page 31 and 32: Tubing - TPEE Tubing THOMAFLUID ®
- Page 33 and 34: Tubing - FEP Tubing • Water absor
- Page 35 and 36: Tubing - FEP Tubing Tubing and Pipe
- Page 37 and 38: Tubing - MFA Tubing Product specifi
- Page 39 and 40: Tubing - PA Tubing Technical specif
- Page 41 and 42: Tubing - PA Tubing Tubing and Pipes
- Page 43 and 44: Tubing - PA Tubing Tubing and Pipes
- Page 45 and 46: Tubing - PA Tubing Tubing and Pipes
- Page 47 and 48: Tubing - PE Tubing Tubing and Pipes
- Page 49 and 50: Tubing - PE Tubing THOMAFLUID ® -L
- Page 51: Tubing - PE Tubing THOMAFLUID ® -H
- Page 55 and 56: Tubing - PE Tubing Item I-Ø O-Ø M
- Page 57 and 58: Tubing - PEEK Tubing Tubing and Pip
- Page 59 and 60: Tubing - PFA Tubing Technical speci
- Page 61 and 62: Tubing - PFA Tubing Tubing and Pipe
- Page 63 and 64: Tubing - PP Tubing Tubing and Pipes
- Page 65 and 66: Tubing - PTFE Tubing Tubing and Pip
- Page 67 and 68: Tubing - PTFE Tubing Tubing and Pip
- Page 69 and 70: Tubing - PTFE Tubing Technical spec
- Page 71 and 72: Tubing - PTFE Tubing Tubing and Pip
- Page 73 and 74: Tubing - PTFE Tubing Technical spec
- Page 75 and 76: Tubing - PTFE Tubing Item Inside Ø
- Page 77 and 78: Tubing - PTFE Tubing THOMAFLUID ®
- Page 79 and 80: Tubing - PVDF Tubing THOMAFLUID ®
- Page 81 and 82: Tubing - Stainless Steel Tubing Ite
- Page 83 and 84: Tubing - Titanium and Stainless Ste
- Page 85 and 86: Tubing - Hose-/Tubing clamps Clamps
- Page 87 and 88: Tubing - Hose-/Tubing clamps Clamps
- Page 89 and 90: Tubing - Pipe Clips/-Clamps THOMAFL
- Page 91 and 92: Fittings - Luer-Lock Connectors One
- Page 93 and 94: Fittings - Luer-Lock Connectors One
- Page 95 and 96: Fittings - Luer-Lock Connectors THO
- Page 97 and 98: Fittings - Luer-Lock Connectors Den
- Page 99 and 100: Fittings - Luer-Lock Connectors THO
- Page 101 and 102: Fittings - Capillary Connectors (HP
Tubing - PE Tubing<br />
THOMAFLUID ® -LDPE/EVA Pharmaceutical<br />
<strong>Co</strong>mposite Tubing<br />
Application area<br />
• Pharmaceutical industry, biotechnology, chemical industry, biochemical<br />
process technology<br />
Product specification<br />
• Pressure tubing.<br />
• Liner is inert and neutral, tasteless and odourless.<br />
• Liner does not absorb liquids.<br />
• Liner meets the requirements of FDA, USDA, National Formulary, and<br />
the USP-Standards for food, beverages, pharmaceutical products,<br />
laboratory and medical equipment.<br />
• Non-toxic.<br />
• Jacket is resistant to abrasion and aging.<br />
• Neither the jacket nor the liner contain plasticizers or vinyl chloride.<br />
Technical specification<br />
• Material:<br />
Liner: LDPE (polyethylene of low density, highly cross-linked)<br />
Jacket: EVA (ethylene vinyl acetate)<br />
• <strong>Co</strong>lour: translucent<br />
• Temperature range: -35 to +70 °C<br />
• Embrittlement temperature: -51 °C<br />
• Resistance to aging: very good<br />
• Mechanical behaviour: flexible<br />
• Sterilization: gas (ethylene oxide); gamma-rays<br />
Tubing and Pipes made of Rigid Plastics<br />
THOMAFLUID ® -LDPE/EVA Pharmaceutical<br />
<strong>Co</strong>mposite Tubing - High-Temperature<br />
Product specification<br />
• Liner is inert and neutral, tasteless and odourless, liner does not<br />
absorb liquids, liner meets the requirements of FDA, USDA, National<br />
Formulary, and the USP-Standards for food, beverages, pharmaceutical<br />
products, laboratory and medical equipment.<br />
• Non-toxic.<br />
• Jacket is resistant to abrasion and aging.<br />
• Neither the jacket nor the liner contain plasticizers or vinyl chloride.<br />
Technical specification<br />
• Material:<br />
Liner: LDPE (polyethylene of low density, highly cross-linked)<br />
Jacket: EVA (ethylene vinyl acetate, highly cross-linked)<br />
• <strong>Co</strong>lour: translucent<br />
• Temperature range: -35 to +95 °C<br />
• Embrittlement temperature: -51 °C<br />
• Resistance to aging: very good<br />
• Mechanical behaviour: flexible<br />
• Hemolysis: none<br />
Unit Price<br />
Item Inside Outside Max. op.<br />
Ø Ø pressure 1<br />
mm mm bar m EURO<br />
28000 3.2 4.8 3.3 5 41.00<br />
28001 3.2 4.8 3.3 15 108.00<br />
28002 3.2 6.4 5.5 5 59.00<br />
28003 3.2 6.4 5.5 15 154.00<br />
28006 6.4 9.5 4.5 5 95.00<br />
28007 6.4 9.5 4.5 15 246.00<br />
28008 9.5 12.7 4 5 100.00<br />
28009 9.5 12.7 4 15 261.00<br />
28010 9.5 15.9 5 5 151.00<br />
28011 9.5 15.9 5 15 394.00<br />
28012 12.7 15.9 2.5 5 151.00<br />
28013 12.7 15.9 2.5 15 394.00<br />
28014 12.7 19 4 5 190.00<br />
28015 12.7 19 4 15 420.00<br />
28016 19 25.4 3 15 542.00<br />
28017 25.4 31.8 2 15 660.00<br />
1<br />
at +20 °C<br />
Unit Price<br />
Item Inside Outside Max. op.<br />
Ø Ø pressure 1<br />
mm mm bar m EURO<br />
28019 1.6 4.8 6.5 5 98.00<br />
28020 1.6 4.8 6.5 15 241.00<br />
28021 3.2 4.8 3.3 5 100.00<br />
28022 3.2 4.8 3.3 15 284.00<br />
28023 3.2 6.4 5.5 5 113.00<br />
28024 3.2 6.4 5.5 15 284.00<br />
28027 4.8 6.4 3 5 113.00<br />
28028 4.8 6.4 3 15 284.00<br />
28029 4.8 7.9 4.5 5 149.00<br />
28030 4.8 7.9 4.5 15 356.00<br />
28031 6.4 9.5 4.5 5 162.00<br />
28032 6.4 9.5 4.5 15 389.00<br />
28035 7.9 11.1 4.2 5 202.00<br />
28036 7.9 11.1 4.2 15 445.00<br />
28037 9.5 12.7 4 5 202.00<br />
28038 9.5 12.7 4 15 445.00<br />
28039 9.5 15.9 5 5 236.00<br />
28040 9.5 15.9 5 15 537.00<br />
28041 12.7 15.9 2.5 5 236.00<br />
28042 12.7 15.9 2.5 15 537.00<br />
28045 12.7 19 4 5 302.00<br />
28046 12.7 19 4 15 727.00<br />
28047 19 25.4 3 15 1,018.00<br />
28048 25.4 31.8 2 15 1,355.00<br />
1<br />
at +20 °C<br />
50 THOMAFLUID ® <strong>II</strong> - 2015