RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)
Thomafluid ® II - Tubings and Pipes
analytical Tubing
Pressure Tubings
Pharmaceutical Tubing
Corrugated Tubings
Elastomers:
Silicone and TPEE
Plastics:
ETfE, fEP, mfa, Pa, PE, PEEK, Pfa
Pi, PP, PTfE und PVdf
Metals:
Stainless steel and Titanium
Connectors
luer-/lock
Capillary (hPlC)
Tubing olive Connectors
Thomafluid ® II - Tubings and Pipes
analytical Tubing
Pressure Tubings
Pharmaceutical Tubing
Corrugated Tubings
Elastomers:
Silicone and TPEE
Plastics:
ETfE, fEP, mfa, Pa, PE, PEEK, Pfa
Pi, PP, PTfE und PVdf
Metals:
Stainless steel and Titanium
Connectors
luer-/lock
Capillary (hPlC)
Tubing olive Connectors
Tubing - PA Tubing THOMAFLUID ® -PA Double-Wall Jacket High-Pressure Chemical Tubing - 1 insert Product specification • High-pressure hydraulic tubing for hardly inflammable hydraulic liquids on phosphate-ester base, liquids on mineral oil and glycol base, mineral lubricants, cooling liquids, water up to +70 °C, dyes, various solvents, fuels, carbonic acid, compressed air, nitrogen, and natural gas. • High mechanical stability • Excellent abrasion resistance • High fatigue strength • Good impact toughness • Good coefficient of sliding friction • Good temperature resistance • Very good abrasion resistance and mechanical stability of the jacket • UV-resistant Technical specification • Material: Liner: PA 11 (polyamide 11) Jacket: TPE-U (PUR), pricked • Colour: black • Temperature range: -40 to +100 °C; water max. +65 °C • Insert: synthetic fibres • Bursting pressure: 4-fold dynamic operating pressure • Regulations: SAE100 R7 Tubing and Pipes made of Rigid Plastics THOMAFLUID ® -PA Corrugated Tubing Application area • Conveyance of liquid media, protection of lines, transport of freeflowing solid matters, withdrawing of gases Product specification • Low-weighted corrugated tubing made of PA 6 (polyamide), transparent, black or grey dyed. High bending strength, dimensional stability in the heat, high resistance to abrasion, and good impact toughness, also at low temperatures. Low tendency to build-up an electrostatic charge and good chemical resistance, except to acids, halogens, and oxidants. • UV-resistant. Technical specification • Material: PA 6 (polyamide 6) • Temperature range: -30 to +80 °C (DIN 53446) • Density: 1.12 up to 1.15 g/cm 3 (DIN 53479) • Tearing strength: 40 - 70 N/mm 2 (DIN 53455) • Elongation at break: 50 - 200 % (DIN 53455) • E-modulus: 1200 - 3200 N/mm 2 (DIN 53457) • Impact toughness: without break (DIN 53453) • Notch impact strength: without break (DIN 53453) • Linear expansion coefficient: 0.7 - 1.2 x 10 -4 x K -1 (DIN 52523) • Thermal conductivity: 0.21 - 0.25 W/mK (DIN 52612) • Track resistance: KA3b (DIN 53480) • Dielectric strength: 20 - 80 kV/mm (DIN 53481) Item Inside Ø Outside Ø Max. op. pressure 1 Min. bending radius Unit Price mm mm bar mm m EURO 13087 3.2 8.6 172 13 5 116.00 13088 3.2 8.6 172 13 10 210.00 13089 4.8 10.9 207 19 5 118.00 13090 4.8 10.9 207 19 10 215.00 13091 6.4 13 207 32 5 133.00 13092 6.4 13 207 32 10 246.00 13093 8 15.1 172 44 5 151.00 13094 8 15.1 172 44 10 277.00 13095 9.5 16.8 155 51 3 113.00 13096 9.5 16.8 155 51 5 156.00 13097 12.7 20.8 138 76 3 154.00 13098 12.7 20.8 138 76 5 236.00 13099 19 27.2 86 127 1 82.00 13100 19 27.2 86 127 3 213.00 1 at +20 °C Item Nominal width Inside Ø Outside Ø Min. bending radius Colour Unit Price mm mm mm mm m EURO 43082 7.5 6.7 10.5 11 nature 5 48.00 43083 7.5 6.7 10.5 11 nature 10 85.00 43084 7.5 6.7 10.5 11 nature 15 116.00 43085 8.5 8.5 11.5 13 nature 5 48.00 43086 8.5 8.5 11.5 13 nature 10 85.00 43087 8.5 8.5 11.5 13 nature 15 116.00 43088 10 9.9 13 15 nature 5 53.00 43089 10 9.9 13 15 nature 10 90.00 43090 10 9.9 13 15 nature 15 124.00 43094 12 12.2 15.7 20 nature 5 70.00 43095 12 12.2 15.7 20 nature 10 122.00 43096 12 12.2 15.7 20 nature 15 165.00 43097 13 12.8 16 20 nature 5 81.00 43098 13 12.8 16 20 nature 10 145.00 43099 13 12.8 16 20 nature 15 197.00 43106 17 16.7 21.2 30 nature 5 94.00 43107 17 16.7 21.2 30 nature 10 166.00 43108 17 16.7 21.2 30 nature 15 221.00 43109 4.5 4.5 7.1 10 black 5 44.00 43110 4.5 4.5 7.1 10 black 10 78.00 44 THOMAFLUID ® II - 2015
Tubing - PE Tubing Tubing and Pipes made of Rigid Plastics Item Nominal width Inside Ø Outside Ø Min. bending radius Colour Unit Price mm mm mm mm m EURO 43111 4.5 4.5 7.1 10 black 15 105.00 43112 7.5 6.7 10.5 11 black 5 48.00 43113 7.5 6.7 10.5 11 black 10 85.00 43114 7.5 6.7 10.5 11 black 15 116.00 43115 8.5 8.5 11.5 13 black 5 48.00 43116 8.5 8.5 11.5 13 black 10 85.00 43117 8.5 8.5 11.5 13 black 15 116.00 43118 10 9.9 13 15 black 5 53.00 43119 10 9.9 13 15 black 10 90.00 43120 10 9.9 13 15 black 15 124.00 43121 11 10.5 13.6 18 black 5 56.00 43122 11 10.5 13.6 18 black 10 96.00 43123 11 10.5 13.6 18 black 15 131.00 43124 12 12.2 15.7 20 black 5 70.00 43125 12 12.2 15.7 20 black 10 122.00 43126 12 12.2 15.7 20 black 15 165.00 43127 13 12.8 16 20 black 5 81.00 43128 13 12.8 16 20 black 10 145.00 43129 13 12.8 16 20 black 15 197.00 43130 14 14.2 18.5 25 black 5 90.00 43131 14 14.2 18.5 25 black 10 158.00 43132 14 14.2 18.5 25 black 15 214.00 43133 16 14.9 18.9 25 black 5 91.00 43134 16 14.9 18.9 25 black 10 160.00 43135 16 14.9 18.9 25 black 15 216.00 43136 17 16.7 21.2 30 black 5 94.00 43137 17 16.7 21.2 30 black 10 166.00 43138 17 16.7 21.2 30 black 15 221.00 PE Tubing THOMAFLUID ® -PE Analytical Tubing Product specification • High pressure resistance • Excellent chemical properties • Very good electrical parameters • Flexibility and thus easy processing • Excellent resistance to alkalis and acids, short chain alcohols, aqueous salt solutions, synthetic detergents, spirits, fruit juices and milk Technical specification • Material: PE, soft (polyethylene, soft, uncrosslinked) • Colour: natural translucent • Shore hardness D: 43° ±5° (DIN 53505) • Temperature range: -40 to +80 °C • Volume resistivity: 10 17 Ohm x cm (DIN 53482) • Dielectric strength: 750 kV/cm (DIN 53482) • Dielectric loss factor at 10h6 Hz:
- Page 1 and 2: Reichelt Chemietechnik GmbH + Co. T
- Page 3 and 4: Inhaltsübersicht Content: Tubing (
- Page 5 and 6: Tubing - Silicone Tubing Tubing mad
- Page 7 and 8: Tubing - Silicone Tubing Tubing mad
- Page 9 and 10: Tubing - Silicone Tubing Tubing mad
- Page 11 and 12: Tubing - Silicone Tubing Tubing mad
- Page 13 and 14: Tubing - Silicone Tubing Tubing mad
- Page 15 and 16: Tubing - Silicone Tubing Tubing mad
- Page 17 and 18: Tubing - Silicone Tubing Technical
- Page 19 and 20: Tubing - Silicone Tubing Tubing mad
- Page 21 and 22: Tubing - Silicone Tubing THOMAFLUID
- Page 23 and 24: Tubing - Silicone Tubing Item Insid
- Page 25 and 26: Tubing - Silicone Tubing • High c
- Page 27 and 28: Tubing - Silicone Tubing Unit Price
- Page 29 and 30: Tubing - Silicone Tubing THOMAFLUID
- Page 31 and 32: Tubing - TPEE Tubing THOMAFLUID ®
- Page 33 and 34: Tubing - FEP Tubing • Water absor
- Page 35 and 36: Tubing - FEP Tubing Tubing and Pipe
- Page 37 and 38: Tubing - MFA Tubing Product specifi
- Page 39 and 40: Tubing - PA Tubing Technical specif
- Page 41 and 42: Tubing - PA Tubing Tubing and Pipes
- Page 43 and 44: Tubing - PA Tubing Tubing and Pipes
- Page 45: Tubing - PA Tubing Tubing and Pipes
- Page 49 and 50: Tubing - PE Tubing THOMAFLUID ® -L
- Page 51 and 52: Tubing - PE Tubing THOMAFLUID ® -H
- Page 53 and 54: Tubing - PE Tubing THOMAFLUID ® -H
- Page 55 and 56: Tubing - PE Tubing Item I-Ø O-Ø M
- Page 57 and 58: Tubing - PEEK Tubing Tubing and Pip
- Page 59 and 60: Tubing - PFA Tubing Technical speci
- Page 61 and 62: Tubing - PFA Tubing Tubing and Pipe
- Page 63 and 64: Tubing - PP Tubing Tubing and Pipes
- Page 65 and 66: Tubing - PTFE Tubing Tubing and Pip
- Page 67 and 68: Tubing - PTFE Tubing Tubing and Pip
- Page 69 and 70: Tubing - PTFE Tubing Technical spec
- Page 71 and 72: Tubing - PTFE Tubing Tubing and Pip
- Page 73 and 74: Tubing - PTFE Tubing Technical spec
- Page 75 and 76: Tubing - PTFE Tubing Item Inside Ø
- Page 77 and 78: Tubing - PTFE Tubing THOMAFLUID ®
- Page 79 and 80: Tubing - PVDF Tubing THOMAFLUID ®
- Page 81 and 82: Tubing - Stainless Steel Tubing Ite
- Page 83 and 84: Tubing - Titanium and Stainless Ste
- Page 85 and 86: Tubing - Hose-/Tubing clamps Clamps
- Page 87 and 88: Tubing - Hose-/Tubing clamps Clamps
- Page 89 and 90: Tubing - Pipe Clips/-Clamps THOMAFL
- Page 91 and 92: Fittings - Luer-Lock Connectors One
- Page 93 and 94: Fittings - Luer-Lock Connectors One
- Page 95 and 96: Fittings - Luer-Lock Connectors THO
Tubing - PA Tubing<br />
THOMAFLUID ® -PA Double-Wall Jacket<br />
High-Pressure Chemical Tubing - 1 insert<br />
Product specification<br />
• High-pressure hydraulic tubing for hardly inflammable hydraulic<br />
liquids on phosphate-ester base, liquids on mineral oil and glycol<br />
base, mineral lubricants, cooling liquids, water up to +70 °C, dyes,<br />
various solvents, fuels, carbonic acid, compressed air, nitrogen, and<br />
natural gas.<br />
• High mechanical stability<br />
• Excellent abrasion resistance<br />
• High fatigue strength<br />
• Good impact toughness<br />
• Good coefficient of sliding friction<br />
• Good temperature resistance<br />
• Very good abrasion resistance and mechanical stability of the jacket<br />
• UV-resistant<br />
Technical specification<br />
• Material:<br />
Liner: PA 11 (polyamide 11)<br />
Jacket: TPE-U (PUR), pricked<br />
• <strong>Co</strong>lour: black<br />
• Temperature range: -40 to +100 °C; water max. +65 °C<br />
• Insert: synthetic fibres<br />
• Bursting pressure: 4-fold dynamic operating pressure<br />
• Regulations: SAE100 R7<br />
Tubing and Pipes made of Rigid Plastics<br />
THOMAFLUID ® -PA <strong>Co</strong>rrugated Tubing<br />
Application area<br />
• <strong>Co</strong>nveyance of liquid media, protection of lines, transport of freeflowing<br />
solid matters, withdrawing of gases<br />
Product specification<br />
• Low-weighted corrugated tubing made of PA 6 (polyamide), transparent,<br />
black or grey dyed. High bending strength, dimensional stability in<br />
the heat, high resistance to abrasion, and good impact toughness, also<br />
at low temperatures. Low tendency to build-up an electrostatic charge<br />
and good chemical resistance, except to acids, halogens, and oxidants.<br />
• UV-resistant.<br />
Technical specification<br />
• Material: PA 6 (polyamide 6)<br />
• Temperature range: -30 to +80 °C (DIN 53446)<br />
• Density: 1.12 up to 1.15 g/cm 3 (DIN 53479)<br />
• Tearing strength: 40 - 70 N/mm 2 (DIN 53455)<br />
• Elongation at break: 50 - 200 % (DIN 53455)<br />
• E-modulus: 1200 - 3200 N/mm 2 (DIN 53457)<br />
• Impact toughness: without break (DIN 53453)<br />
• Notch impact strength: without break (DIN 53453)<br />
• Linear expansion coefficient: 0.7 - 1.2 x 10 -4 x K -1 (DIN 52523)<br />
• Thermal conductivity: 0.21 - 0.25 W/mK (DIN 52612)<br />
• Track resistance: KA3b (DIN 53480)<br />
• Dielectric strength: 20 - 80 kV/mm (DIN 53481)<br />
Item<br />
Inside<br />
Ø<br />
Outside<br />
Ø<br />
Max. op.<br />
pressure 1<br />
Min.<br />
bending<br />
radius<br />
Unit<br />
Price<br />
mm mm bar mm m EURO<br />
13087 3.2 8.6 172 13 5 116.00<br />
13088 3.2 8.6 172 13 10 210.00<br />
13089 4.8 10.9 207 19 5 118.00<br />
13090 4.8 10.9 207 19 10 215.00<br />
13091 6.4 13 207 32 5 133.00<br />
13092 6.4 13 207 32 10 246.00<br />
13093 8 15.1 172 44 5 151.00<br />
13094 8 15.1 172 44 10 277.00<br />
13095 9.5 16.8 155 51 3 113.00<br />
13096 9.5 16.8 155 51 5 156.00<br />
13097 12.7 20.8 138 76 3 154.00<br />
13098 12.7 20.8 138 76 5 236.00<br />
13099 19 27.2 86 127 1 82.00<br />
13100 19 27.2 86 127 3 213.00<br />
1<br />
at +20 °C<br />
Item<br />
Nominal<br />
width<br />
Inside<br />
Ø<br />
Outside<br />
Ø<br />
Min.<br />
bending<br />
radius<br />
<strong>Co</strong>lour Unit Price<br />
mm mm mm mm m EURO<br />
43082 7.5 6.7 10.5 11 nature 5 48.00<br />
43083 7.5 6.7 10.5 11 nature 10 85.00<br />
43084 7.5 6.7 10.5 11 nature 15 116.00<br />
43085 8.5 8.5 11.5 13 nature 5 48.00<br />
43086 8.5 8.5 11.5 13 nature 10 85.00<br />
43087 8.5 8.5 11.5 13 nature 15 116.00<br />
43088 10 9.9 13 15 nature 5 53.00<br />
43089 10 9.9 13 15 nature 10 90.00<br />
43090 10 9.9 13 15 nature 15 124.00<br />
43094 12 12.2 15.7 20 nature 5 70.00<br />
43095 12 12.2 15.7 20 nature 10 122.00<br />
43096 12 12.2 15.7 20 nature 15 165.00<br />
43097 13 12.8 16 20 nature 5 81.00<br />
43098 13 12.8 16 20 nature 10 145.00<br />
43099 13 12.8 16 20 nature 15 197.00<br />
43106 17 16.7 21.2 30 nature 5 94.00<br />
43107 17 16.7 21.2 30 nature 10 166.00<br />
43108 17 16.7 21.2 30 nature 15 221.00<br />
43109 4.5 4.5 7.1 10 black 5 44.00<br />
43110 4.5 4.5 7.1 10 black 10 78.00<br />
44 THOMAFLUID ® <strong>II</strong> - 2015
Change language