RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)

Tubing - FEP Tubing
Tubing and Pipes made of Rigid Plastics
Item
Inside
Ø
Outside
Ø
Wall
thickness
Max. op.
pressure 1
Min.
bending
radius
Unit
Price
​ mm mm mm bar mm m EURO
451131 6.4 7.9 0.25 21 152 3 100.00
451141 6.4 7.9 0.25 21 152 6 152.00
451151 6.4 9.5 0.25 14 238 1.5 78.00
45116 6.4 9.5 0.25 14 238 3 131.00
45117 6.4 9.5 0.25 14 238 6 181.00
45118 9.5 11.1 0.3 14 254 0.9 54.00
45119 9.5 11.1 0.3 14 254 1.5 76.00
45120 9.5 11.1 0.3 14 254 3 125.00
45121 9.5 12.7 0.3 25 101 0.9 71.00
45122 9.5 12.7 0.3 25 101 1.5 101.00
45123 9.5 12.7 0.3 25 101 3 177.00
45124 12.7 15.9 0.38 17 152 0.9 83.00
45125 12.7 15.9 0.38 17 152 1.5 129.00
45126 12.7 15.9 0.38 17 152 3 223.00
1
at +20 °C
THOMAFLUID ® -FEP Antista Double-Wall Jacket
Pharmaceutical Suction / Pressure Tubing
Application area
• Chemical industry, pharmaceutical industry, mineral oil industry,
process engineering
Product specification
• Completely smooth, seamless fluoroplastic lining, therefore optimal
emptying of residual charge and easy cleaning at change of charge.
• Antiadhesive properties of the liner substantially facilitate the transport
of viscous media due to low flow losses. Therefore, the tubing is particularly
suitable for the conveyance of pharmaceuticals and cosmetics.
• Liner is physiologically completely safe, it does not contain any
extractable constituents, therefore suitable for especially high-grade /
ultrapure products.
• Liner is absolutely smooth and homogenous, formation of bacteria
nests excluded.
• Jacket is electrically conductive, abrasion-resistant, hardly inflammable
and with textile imprint.
• Very good chemical resistance, resistant to weather and aging.
• Diffusion resistance considerably better than PTFE.
• Outer layers and intermediate layers of the tubing specification are
electrically conductive, all metallic inserts are combined with the
conductive rubber layers.
Technical specification
• Material:
Liner: FEP (fluoroethylene-propylene), seamless, smooth bore,
electrically non-conductive
Jacket: EPDM (ethylene-propylene-diene rubber)
• Colour: inside transparent, outside black
• Temperature range: -30 to +100 °C, for a short time +130 °C
• Insert: adhesive rubber compound as intermediate layer, two braided
textile inserts with two crossed copper braids
• Coil: stainless steel, hot-dip galvanized (depending on type)
• Jacket and intermediate layer: antistatic (electrically conductive)
• Conductivity: „M“ (DIN EN 12115)
• Leakage resistance: