RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)
Share Embed Flag
Download ePaper

RCT Reichelt Chemietechnik GmbH + Co. - Thomafluid II (EN)

Thomafluid ® II - Tubings and Pipes analytical Tubing Pressure Tubings Pharmaceutical Tubing Corrugated Tubings Elastomers: Silicone and TPEE Plastics: ETfE, fEP, mfa, Pa, PE, PEEK, Pfa Pi, PP, PTfE und PVdf Metals: Stainless steel and Titanium Connectors luer-/lock Capillary (hPlC) Tubing olive Connectors Thomafluid ® II - Tubings and Pipes
analytical Tubing
Pressure Tubings
Pharmaceutical Tubing
Corrugated Tubings
Elastomers:
Silicone and TPEE
Plastics:
ETfE, fEP, mfa, Pa, PE, PEEK, Pfa
Pi, PP, PTfE und PVdf
Metals:
Stainless steel and Titanium
Connectors
luer-/lock
Capillary (hPlC)
Tubing olive Connectors

rct.online
13.03.2017 Views

Tubing - FEP Tubing Item Inside Ø Outside Ø Max. op. pressure 1 Min. bending radius Unit Price ​ mm mm bar mm m EURO 47296 4 6 25 50 25 476.00 47297 6 8 20 70 5 213.00 47298 6 8 20 70 25 532.00 47299 8 10 15 120 5 243.00 47300 8 10 15 120 25 609.00 47301 10 12 12.5 180 5 294.00 47302 10 12 12.5 180 25 720.00 1 at +20 °C THOMAFLUID ® -High-Tech-FEP Shrinkable Tubing Technical specification • Material: FEP (fluorinated ethylene-propylene) • Colour: transparent to clear • Temperature range: -40 to +205 °C • Shrinking rate: 1.3:1 • Shrinkage temperature: +204 to +216 °C • Tensile strength: 24.1 MPa (D1708) • Water absorption: 2.000 V/mm • Volume Resistivity: 10 18 Ohm x cm • Surface resistance: 10 16 Ohm ​• Coefficient of Friction: 1.338 (D542) Tubing and Pipes made of Rigid Plastics THOMAFLUID ® -High-Chem-FEP Corrugated Tubing with straight end pieces Application area • Flexibly movable tubing connections at systems and aggregates operated under mechanical risk factors such as vibration, shaking, cramped conditions, etc. • Tight mobile pipe running at machines and equipments of superclean room technology, nuclear technology, biotechnology and gene technology • Movable extraction systems for detrimental gases and vapours, movable aeration supply lines. Product specification • Temperature-resistant, flexible fluoroethylene-propylene (FEP) corrugated bellows tubing of highest chemical resistance and mechanical stability for use under normal conditions, slight excess-pressure or vacuum. Thin-walled, corrugatedly folded, thus extremely pliable, electrically non-conducting and resistant to aging also under extreme environmental conditions such as vapours of acids and solvents, moisture, ionizing radiation etc. Only slight tendency to adhesion of solid matter due to smooth inner surface with antiadhesive properties. Free of extractable constituents and physiologically safe. The tube meets the requirements of FDA guidelines 21 CFR 17.1550. Delivery in standard lengths with straight, not-corrugated connecting pieces on both ends. • Tubing without couplings. Technical specification • Material: FEP (fluorinated ethylene-propylene) • Colour: translucent-clear • Temperature range: -260 to +200 °C • Vacuum strength: up to 30 mm Hg ​• Water absorption:

Tubing - FEP Tubing Tubing and Pipes made of Rigid Plastics Item Inside Ø Outside Ø I-Ø end fitting O-Ø end fitting Length end fitting Length bellows Price ​ mm mm mm mm mm mm EURO 45144 22.2 31.8 20.48 22 38 2,500 975.00 45145 25.4 34.9 22.22 24 51 500 238.00 45148 31.8 41.3 30.22 32 51 500 300.00 45149 31.8 41.3 30.22 32 51 1,000 on req. 45150 31.8 41.3 30.22 32 51 2,500 on req. 45151 38.1 47.6 36.22 38 51 500 on req. 45152 38.1 47.6 36.22 38 51 1,000 on req. 45153 38.1 47.6 36.22 38 51 2,500 on req. 45154 50.8 66.7 47.96 50 51 500 on req. 45155 50.8 66.7 47.96 50 51 1,000 on req. 45156 50.8 66.7 47.96 50 51 2,500 on req. THOMAFLUID ® -FEP/PVC Composite Tubing Product specification • Smallest bending radii practically without kinks due to highest flexibility. • Highest chemical resistance allowing conveyance of all kinds of aggressive solutions (solvents) without extracting. • Completely neutral in taste and odour. • Meets FDA Criteria for food contact. Technical specification • Material: Liner: FEP (fluoroethylene-propylene) Jacket: TYGON ® -SE-200 (PVC, cross-linked) • Temperature range: -10 to +77 °C • Density: 1.45 g/cm 3 • Embrittlement temperature: -40 °C (ASTM D746) • Tensile strength: 13.8 MPa (ASTM D412) • Tear resistance: 29 kN/m (ASTM D1004) • Ultimate elongation: 350 % (ASTM D412) • Tensile modulus: 4.5 MPa at 100 % Elongation; 3.1 MPa at 300 % Elongation • Compression set: 53 % at +70 °C / 22 h • Dielectric strength: 24.4 kV/mm (ASTM D149-97) • Water absorption:

Tubing - FEP Tubing<br />

Item<br />

Inside<br />

Ø<br />

Outside<br />

Ø<br />

Max. op.<br />

pressure 1<br />

Min.<br />

bending<br />

radius<br />

Unit<br />

Price<br />

​ mm mm bar mm m EURO<br />

47296 4 6 25 50 25 476.00<br />

47297 6 8 20 70 5 213.00<br />

47298 6 8 20 70 25 532.00<br />

47299 8 10 15 120 5 243.00<br />

47300 8 10 15 120 25 609.00<br />

47301 10 12 12.5 180 5 294.00<br />

47302 10 12 12.5 180 25 720.00<br />

1<br />

at +20 °C<br />

THOMAFLUID ® -High-Tech-FEP Shrinkable Tubing<br />

Technical specification<br />

• Material: FEP (fluorinated ethylene-propylene)<br />

• <strong>Co</strong>lour: transparent to clear<br />

• Temperature range: -40 to +205 °C<br />

• Shrinking rate: 1.3:1<br />

• Shrinkage temperature: +204 to +216 °C<br />

• Tensile strength: 24.1 MPa (D1708)<br />

• Water absorption: 2.000 V/mm<br />

• Volume Resistivity: 10 18 Ohm x cm<br />

• Surface resistance: 10 16 Ohm<br />

​• <strong>Co</strong>efficient of Friction: 1.338 (D542)<br />

Tubing and Pipes made of Rigid Plastics<br />

THOMAFLUID ® -High-Chem-FEP <strong>Co</strong>rrugated Tubing<br />

with straight end pieces<br />

Application area<br />

• Flexibly movable tubing connections at systems and aggregates<br />

operated under mechanical risk factors such as vibration, shaking,<br />

cramped conditions, etc.<br />

• Tight mobile pipe running at machines and equipments of superclean<br />

room technology, nuclear technology, biotechnology and gene<br />

technology<br />

• Movable extraction systems for detrimental gases and vapours,<br />

movable aeration supply lines.<br />

Product specification<br />

• Temperature-resistant, flexible fluoroethylene-propylene (FEP) corrugated<br />

bellows tubing of highest chemical resistance and mechanical<br />

stability for use under normal conditions, slight excess-pressure or<br />

vacuum. Thin-walled, corrugatedly folded, thus extremely pliable,<br />

electrically non-conducting and resistant to aging also under extreme<br />

environmental conditions such as vapours of acids and solvents,<br />

moisture, ionizing radiation etc. Only slight tendency to adhesion of<br />

solid matter due to smooth inner surface with antiadhesive properties.<br />

Free of extractable constituents and physiologically safe. The tube<br />

meets the requirements of FDA guidelines 21 CFR 17.1550. Delivery<br />

in standard lengths with straight, not-corrugated connecting pieces<br />

on both ends.<br />

• Tubing without couplings.<br />

Technical specification<br />

• Material: FEP (fluorinated ethylene-propylene)<br />

• <strong>Co</strong>lour: translucent-clear<br />

• Temperature range: -260 to +200 °C<br />

• Vacuum strength: up to 30 mm Hg<br />

​• Water absorption:

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!